Whirlpool Corp
Whirlpool Corp
| Address(es) |
|
| Website | Not available |
| Status | MEMBER |
| Acceptance date | 2012-08-30 |
Further information
Stage | Country | Name |
|---|---|---|
3 | United States of America |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
CONT | IEC 60730-1:2013 | 10.2.4.3 PUSH/PULL TEST FOR TABS12.2 PROTECTION AGAINST HUMID CONDITIONS13.1 INSULATION RESISTANCE13.2 ELECTRIC STRENGTH TEST14 HEATING TEST16 ENVIRONMENTAL STRESS OF TEMPERATURE17 ENDURANCE TEST (EXCEPT MANUAL ACTION)20.3 CREAPAGE AND CLEARANCE - SOLID INSULATION22 RESISTANCE TO CORROSION24.4.1 SWITCH-MODE POWER SUPPLY27.3 OVERVOLTAGE AND UNDERVOLTAGEH.26.10 RING WAVE IMMUNITYH.26.11 ELECTROSTATIC DISCHARGE TESTH.26.13 TEST OF INFLUENCE OF SUPPLY FREQUENCY VARATIONS H.26.15 EVALUATION OF COMPLIANCEH.26.5 VOLTAGE DIPS, VOLTAGE INTERRUPTIONS AND VOLTAGE VARIATIONS IN THE POWER SUPPLY NETWORKH.26.5.4 VOLTAGE DIPS AND VOLTAGE INTERRUPTIONS IN THE POWER SUPPLY NETWORK - VOLTAGE VARIATIONH.26.8 SURGE IMMUNITYH.26.9 ELECTRICAL FAST TRANSIENT/ BURST IMMUNITYH.27.1.1 Abnormal OperationH.27.1.1.3, H.27.1.1.4 Electronic Circuit FaultsH.8 PROTECTION AGAINST ELECTRIC SHOCK | 2017-11-15 | |
CONT | IEC 60730-1:2013/AMD1:2015 | 10.2.4.3 PUSH/PULL TEST FOR TABS12.2 PROTECTION AGAINST HUMID CONDITIONS13.1 INSULATION RESISTANCE13.2 ELECTRIC STRENGTH TEST14 HEATING TEST16 ENVIRONMENTAL STRESS OF TEMPERATURE17.6 ENDURANCE TEST (EXCEPT MANUAL ACTION)20.3 CREEPAGE DISTANCES, CLEARANCES, AND DISTANCES THROUGH SOLID INSULATION-SOLID INSULATION 2.1.5/2.1.6 SELV OUTPUT VOLTAGE MEASUREMENT22 RESISTANCE TO CORROSION24.4.1 SWITCH MODE POWER SUPPLY OVERLOAD25.2 OVERVOLTAGE AND UNDERVOLTAGEH.17.1.4.2 THERMAL CYCLINGH.26.10 RING WAVE IMMUNITYH.26.11 ELECTROSTATIC DISCHARGEH.26.13 INFLUENCE OF SUPPLY FREQUENCY VARATIONSH.26.15 EVALUATION OF COMPLIANCEH.26.5 VOLTAGE DIPS, VOLTAGE INTERRUPTIONS AND VOLTAGE VARIATIONS IN THE POWER SUPPLY NETWORKH.26.8 SURGE IMMUNITYH.26.9 ELECTRICAL FAST TRANSIENT/ BURST IMMUNITYH.27.1.1 Abnormal OperationH.27.1.1.3, H.27.1.1.4 Electronic Circuit FaultsH.8 PROTECTION AGAINST ELECTRIC SHOCK | 2017-11-15 | |
CONT | IEC 60730-1:2013/AMD2:2020 | 10.2.4.3 PUSH/PULL TEST FOR TABS12.2 PROTECTION AGAINST HUMID CONDITIONS13.1 INSULATION RESISTANCE13.2 ELECTRIC STRENGTH TEST14 HEATING TEST16 ENVIRONMENTAL STRESS OF TEMPERATURE17.6 ENDURANCE TEST (EXCEPT MANUAL ACTION)20.3 CREEPAGE DISTANCES, CLEARANCES, AND DISTANCES THROUGH SOLID INSULATION-SOLID INSULATION 2.1.5/2.1.6 SELV OUTPUT VOLTAGE MEASUREMENT22 RESISTANCE TO CORROSION24.4.1 SWITCH MODE POWER SUPPLY OVERLOAD25.2 OVERVOLTAGE AND UNDERVOLTAGEH.17.1.4.2 THERMAL CYCLINGH.26.10 RING WAVE IMMUNITYH.26.11 ELECTROSTATIC DISCHARGEH.26.13 INFLUENCE OF SUPPLY FREQUENCY VARATIONSH.26.15 EVALUATION OF COMPLIANCEH.26.5 VOLTAGE DIPS, VOLTAGE INTERRUPTIONS AND VOLTAGE VARIATIONS IN THE POWER SUPPLY NETWORKH.26.8 SURGE IMMUNITYH.26.9 ELECTRICAL FAST TRANSIENT/ BURST IMMUNITYH.27.1.1 Abnormal OperationH.27.1.1.3, H.27.1.1.4 ABNORMAL OPERATION - ELECTRIC CIRCUIT FAULT CONDITIONSH.8 PROTECTION AGAINST ELECTRIC SHOCK2.1.3 DETERMINATION OF WORKING VOLTAGE | 2022-11-09 | |
CONT | IEC 60730-1:2010 | 10.2.4.3 PUSH/PULL TEST FOR TABS12.2 PROTECTION AGAINST HUMID CONDITIONS13.1 INSULATION RESISTANCE13.2 ELECTRIC STRENGTH TEST14 HEATING TEST16 ENVIRONMENTAL STRESS OF TEMPERATURE17 ENDURANCE TEST(EXCEPT MANUAL ACTION)2.1.5/2.1.6 SELV OUTPUT VOLTAGE MEASUREMENT20.3 CREAPAGE AND CLEARANCE - SOLID INSULATION22.1 RESISTANCE TO CORROSION27.3 OVERVOLTAGE AND UNDERVOLTAGEH.11.4, H27.4 ELECTRONIC DISCONNECT TESTH.17.1.4.2 THERMAL CYCLING TESTH.26.10 RING WAVE IMMUNITYH.26.11 ELECTROSTATIC DISCHARGE TESTH.26.13 TEST OF INFLUENCE OF SUPPLY FREQUENCY VARIATIONSH.26.15 EVALUATION OF COMPLIANCEH.26.5 VOLTAGE DIPS, VOLTAGE INTERRUPTIONS AND VOLTAGE VARIATIONS IN THE POWER SUPPLY NETWORKH.26.5.4 VOLTAGE DIPS AND VOLTAGE INTERRUPTIONS IN THE POWER SUPPLY NETWORK - VOLTAGE VARIATIONH.26.8 SURGE IMMUNITYH.26.9 FAST TRANSIENT BURST.H27 ABNORMAL OPERATIONH.8 PROTECTION AGAINST ELECTRIC SHOCK | 2012-08-30 | |
CONT | IEC 60730-1:1999 | 12.2 PROTECTION AGAINST HUMID CONDITIONS13.2 ELECTRIC STRENGTH TEST14 HEATING TEST16 ENVIRONMENTAL STRESS OF TEMPERATURE17 ENDURANCE TEST (EXCEPT MANUAL ACTION)22 RESISTANCE TO CORROSION27.3 OVERVOLTAGE AND UNDERVOLTAGEH.27.1.1 Abnormal OperationH.27.1.1.3, H.27.1.1.4 ABNORMAL OPERATION - ELECTRIC CIRCUIT FAULT CONDITIONSMTL MTLH.8 PROTECTION AGAINST ELECTRIC SHOCK | 2021-12-07 | |
CONT | IEC 60730-1:1999/AMD1:2003 | 12.2 PROTECTION AGAINST HUMID CONDITIONS13.2 ELECTRIC STRENGTH TEST14 HEATING TEST16 ENVIRONMENTAL STRESS OF TEMPERATURE17 ENDURANCE TEST (EXCEPT MANUAL ACTION)22 RESISTANCE TO CORROSION27.3 OVERVOLTAGE AND UNDERVOLTAGEH.27.1.1 Abnormal OperationH.27.1.1.3, H.27.1.1.4 ABNORMAL OPERATION - ELECTRIC CIRCUIT FAULT CONDITIONSMTL MTLH.8 PROTECTION AGAINST ELECTRIC SHOCK | 2021-12-07 | |
CONT | IEC 60730-1:1999/AMD2:2007 | 12.2 PROTECTION AGAINST HUMID CONDITIONS13.2 ELECTRIC STRENGTH TEST14 HEATING TEST16 ENVIRONMENTAL STRESS OF TEMPERATURE17 ENDURANCE TEST (EXCEPT MANUAL ACTION)22 RESISTANCE TO CORROSION27.3 OVERVOLTAGE AND UNDERVOLTAGEH.27.1.1 Abnormal OperationH.27.1.1.3, H.27.1.1.4 ABNORMAL OPERATION - ELECTRIC CIRCUIT FAULT CONDITIONSMTL MTLH.8 PROTECTION AGAINST ELECTRIC SHOCK | 2021-12-07 |