Techtronic Cordless GP
Techtronic Cordless GP
| Address(es) |
|
| Website | Not available |
| Status | MEMBER |
| Acceptance date | 2021-11-02 |
Further information
Stage | Country | Name |
|---|---|---|
2 | United States of America |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
TOOL | IEC 62841-1:2014 | 6.3.2 EMITTING VISIBLE LIGHT - LUX MEASUREMENT18.6, 18.6.1,18.8 ABNORMAL OPERATION (ELECTRONIC CIRCUIT - FAULT (OPENED/SHORTED) CONDITIONS)19.6 MECHANICAL HAZARDS - NO LOAD SPEED VERIFICATION19.7 MECHANICAL HAZARDS - STABILITY19.9 MECHANICAL HAZARDS - FASTENINGS20.4 MECHANICAL STRENGTH - BRUSH CAP TORQUE20.5 MECHANICAL STRENGTH - IMPACT AUXILIARY HANDLE21.1 CONSTRUCTION - AIR-INTAKE OPENINGS21.1-21.5, 21.8 CONSTRUCTION, CONTROLS AND CONSTRUCTION21.17.1, 21.17.1.1, 21.17.1.3 SWITCH DURABILITY - LOCK-OFF SYSTEM21.17.1, 21.17.1.2, 21.17.1.3 SWITCH DURABILITY - SELF-RESTORING LOCK-OFF SYSTEM21.21 CONSTRUCTION - CAPACITOR DISCHARGE21.22 CONSTRUCTION – SNAP-IN DEVICES21.23 CONSTRUCTION - LOOSEN OF HANDLES, KNOBS, GRIPS,LEVERS AND THE LIKE21.29 CONSTRUCTION - INSULATING MATERIAL OF HANDLES, LEVERS AND KNOBS22.6 INTERNAL WIRING - PARTS THAT MOVE RELATIVE TO EACH OTHER23.1.10 COMPONENTS - LOCKED ROTOR SWITCH AND ENDURANCE 50,00023.1.10.2, 23.1.10.2.1, 23.1.10.2.2 SWITCH ENDURANCE23.1.9 COMPONENTS - CAPACITORS IN SERIES WITH WINDINGS24.11 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - CORD24.12 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - FLEXIBLE CORD BENDING24.13 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - STRAIN RELIEF24.18 WIRE PULL TEST - TYPE X CORDS24.2 CORD FLEXING/STRAIN, INTERCONNECTION CORD25.2 TERMINALS FOR EXTERNAL CONDUCTORS - TERMINAL PULL25.3-25.7 TERMINAL TIGHTENING AND LOOSENING TEST - TYPE X27.1 SCREWS AND CONNECTIONS - MECHANICAL STRESS27.5 SCREWLESS CONNECTORS27.5.1 CONDUCTOR SECUREMENT28.2 CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION - DISTANCE THROUGH INSULATION8.12 MARKING AND INSTRUCTIONS - LABEL RUB9.2 PROTECTION AGAINST ACCESS TO LIVE PARTSK.11 INPUT AND NO LOAD SPEEDK.12.1 BATTERY TOOLS AND BATTERY PACKS - HEATINGK.12.201 NORMAL CHARGING OF LITHIUM-ION SYSTEMSK.13.1 BATTERY TOOLS AND BATTERY PACKS - RESISTANCE TO HEAT, FIRE AND TRACKING - BALL PRESSUREK.18.1 ABNORMAL OPERATION – RESULTS SUMMARYK.18.1.B BATTERY TOOLS AND BATTERY PACKS - ABNORMAL OPERATION - MOTOR TERMINALSK.18.1.C BATTERY TOOLS AND BATTERY PACKS - ABNORMAL OPERATION - LOCKED ROTORK.19.6 MECHANICAL HAZARDS - NO-LOAD SPEEDK.20.1 MECHANICAL STRENGTH TOOLSK.23.1.10 BATTERY TOOLS AND BATTERY PACKS - COMPONENTS - STALLED ROTOR SWITCHK.23.1.201 BATTERY TOOLS AND BATTERY PACKS - 6000 CYCLE SWITCH ENDURANCEK.9.5 PROTECTION AGAINST ELECTRIC SHOCK - ELECTRIC STRENGTHK.18.1.A BATTERY TOOLS AND BATTERY PACKS - BATTERY TERMINAL SHORT | 2021-11-02 | |
TOOL | IEC 62841-2-1:2017 | 12 Heating17 ENDURANCE19.102.1 MECHANICAL HAZARDS-HANDLES - STATIC STALLING TORQUE – DRILLS AND HAMMER DRILLS19.6 MECHANICAL HAZARDS - NO LOAD SPEED VERIFICATIONK.19.6 MECHANICAL HAZARDS - NO LOAD SPEED VERIFICATIONK19.102.1 MECHANICAL HAZARDS-HANDLES - STATIC STALLING TORQUE – DRILLS AND HAMMER DRILLS | 2021-11-02 | |
TOOL | IEC 62841-2-2:2014 | 12.2.1 HEATING17.2 ENDURANCE | 2024-06-24 | |
TOOL | IEC 62841-2-5:2014 | 17.101 GUARD SYSTEM - LONGEVITY17.102 GUARDING SYSTEM-RESISTANCE17.102.3 GUARD SYSTEM - RESISTANCE TO ENVIRONMENTAL AND PLASTIC, METAL, OR MASONRY19.102.4 MECHANICAL HAZARDS - LOWER GUARD CLOSURE TIME19.103.2 BASE STABILITYAA.20.2 Mechanical Strength – Hand-Supported Drop Impact K.19.6 MECHANICAL HAZARDS - NO LOAD SPEED VERIFICATION | 2021-11-02 | |
TOOL | IEC 62841-3-1:2014 | 18.6, 18.6.1, 18.8, TABLE 4 ABNORMAL OPERATION (ELECTRONIC CIRCUIT – FAULT (OPENED/SHORTED) CONDITIONS)19.101.2.3 MECHANICAL HAZARDS - GUARD SYSTEM19.101.2.4 MECHANICAL HAZARDS - GUARD SYSTEM19.101.2.8 MECHANICAL HAZARDS - SAW BLADE GUARD19.105 MECHANICAL HAZARDS - RUN-DOWN TIME19.6 MECHANICAL HAZARDS – NO LOAD SPEED VERIFICATION19.7.101 MECHANICAL HAZARDS - TIP OVER (TABLE SAW)20.101 MECHANICAL STRENGTH - RIVING KNIFE20.102 MECHANICAL STRENGTH - TRANSPORTATION21.101.1 CONSTRUCTION – SAW BLADE21.102.2 MECHANICAL STRENGTH - PUSH STICK21.105.3 MECHANICAL STRENGTH - RIP FENCE OBSTRUCTION21.107.4 CONSTRUCTION – SAW BLADE RETENTION | 2021-11-02 | |
TOOL | IEC 62841-3-1:2014/AMD1:2021 | 18.6, 18.6.1, 18.8, TABLE 4 ABNORMAL OPERATION (ELECTRONIC CIRCUIT – FAULT (OPENED/SHORTED) CONDITIONS)19.101.2.3 MECHANICAL HAZARDS - GUARD SYSTEM19.101.2.4 MECHANICAL HAZARDS - GUARD SYSTEM19.101.2.8 MECHANICAL HAZARDS - SAW BLADE GUARD19.105 MECHANICAL HAZARDS - RUN-DOWN TIME19.6 MECHANICAL HAZARDS – NO LOAD SPEED VERIFICATION19.7.101 MECHANICAL HAZARDS - TIP OVER (TABLE SAW)20.101 MECHANICAL STRENGTH - RIVING KNIFE20.102 MECHANICAL STRENGTH - TRANSPORTATION21.101.1 CONSTRUCTION – SAW BLADE21.102.2 MECHANICAL STRENGTH - PUSH STICK21.105.3 MECHANICAL STRENGTH - RIP FENCE OBSTRUCTION21.107.4 CONSTRUCTION – SAW BLADE RETENTION | 2021-11-02 | |
TOOL | IEC 62841-3-9:2020 | 18.6, 18.6.1, 18.8, TABLE 4 ABNORMAL OPERATION (ELECTRONIC CIRCUIT – FAULT (OPENED/SHORTED) CONDITIONS) 19.101.8 MECHANICAL HAZARDS - SIDE BARRIER AND LOWER GUARD19.101.9 MECHANICAL HAZARDS - CLOSING TIME19.102 MECHANICAL HAZARDS - RETURN DEVICES19.103 MECHANICAL HAZARDS - RUN-DOWN TIME19.6 MECHANICAL HAZARDS - NO LOAD SPEED VERIFICATION19.7.101 MECHANICAL HAZARDS - TIP OVER - DENSITY MEASUREMENT20.101 MECHANICAL STRENGTH - CARRYING MEANS20.102 MECHANICAL STRENGTH - WORKING STAND21.101.2 CONSTRUCTION - SAW BLADE21.105.3 ECCENTRICITY21.105.4 CONSTRUCTION - BLADE RETAINING FASTENERS21.18.2.101, ITEM B), C) CONSTRUCTION - LOCKING DEVICES | 2021-11-02 | |
TOOL | IEC 62841-4-6:2022 | 12 HEATING17 ENDURANCE18.6, 18.6.1, 18.8 ABNORMAL OPERATION (ELECTRONIC CIRCUIT – FAULT (OPENED/SHORTED) CONDITIONS)19.1, 20.1 - 20.3, 20.3.1 MECHANICAL STRENGTH - HAND-SUPPORTED DROP IMPACT19.1, 20.1 - 20.3, 20.3.1 MECHANICAL STRENGTH - BACK-SUPPORTED DROP AND BALL IMPACT20.101.2 STRUCTURAL INTEGRITY TEST21.102 SHOULDER HARNESS RELEASE24.1 Attachment PlugK.20.3.1 MECHANICAL STRENGTH - HAND-SUPPORTED DROP IMPACTK.20.3.1 MECHANICAL STRENGTH - BACK-SUPPORTED DROP AND BALL IMPACTK.23.1.201 COMPONENTS – DC SWITCH ENDURANCEK.24.301 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS | 2024-06-24 |