Simplo Technology Co., Ltd.
Simplo Technology Co., Ltd.
| Address(es) |
|
| Website | Not available |
| Status | MEMBER |
| Acceptance date | 2008-05-06 |
Further information
Stage | Country | Name |
|---|---|---|
2 | Denmark |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
BATT | IEC 62133:2012 | 5.2INSULATION AND WIRING TEST7.2.3, 8.2.2MOULDED CASE STRESS AT HIGH AMBIENTTEMPERATURE TEST7.3.3, 8.3.3FREE FALL TEST8.3.2EXTERNAL SHORT CIRCUIT (BATTERY)8.3.6OVER‐CHARGING OF BATTERY | 2019-10-08 | |
BATT | IEC 62133-2:2017 | 5.2INSULATION AND WIRING TEST7.2.2CASE STRESS7.3.2EXTERNAL SHORT CIRCUIT7.3.3FREE FALL7.3.6OVERCHARGE7.3.8MECHANICAL‐ 7.3.8.1 VIBRATION‐ 7.3.8.2 MECHANICAL SHOCK8.2DETERMINE OF SMALL CELL OR BATTERY | 2019-10-08 | |
BATT | IEC 62133-2:2017/AMD1:2021 | 5.2INSULATION AND WIRING TEST7.2.2CASE STRESS AT HIGH AMBIENT TEMPERATURE7.3.2EXTERNAL SHORT CIRCUIT7.3.3FREE FALL7.3.6OVER-CHARGING OF BATTERYMECHANICAL‐ 7.3.8.1 VIBRATION‐ 7.3.8.2 MECHANICAL SHOCK8.2DETERMINE OF SMALL CELL OR BATTERY | 2022-12-22 | |
ITAV | IEC 62368-1:2018 | Accepted clauses as below:5.4.1.4, Annex B.2MAXIMUM OPERATING TEMPERATURE FOR MATERIALS,COMPONENTS AND SYSTEMS6.2.2.2, 6.2.2.3POWER MEASUREMENTS6.2.3.2RESISTIVE PIS DETERMINATION9.0THERMAL BURN INJURYANNEX B.2.5INPUT TEST: SINGLE PHASEANNEX B.2.6OPERATING TEMPERATURE MEASUREMENTCONDITIONSANNEX B.3SIMULATED ABNORMAL OPERATING CONDITIONSANNEX B.4SIMULATED SINGLE FAULT CONDITIONSANNEX F.3.10 – TEST FOR THE PERMANENCE OFMARKINGSANNEX M.3.2PROTECTION CIRCUITS FOR BATTERIESANNEX M.4.2SECONDARY LITHIUM BATTERY CHARGING SAFEGUARDSANNEX M.4.4 (ANNEX T.7)DROP TEST OF EQUIPMENT CONTAINING A SECONDARYLITHIUM BATTERYANNEX M.5 (ANNEX P.2.3)RISK OF BURN DUE TO SHORT‐CIRCUIT DURINGCARRYINGANNEX Q.1LIMITED POWER SOURCEANNEX T.4 (4.4.3.2)STEADY FORCE TEST, 100 NANNEX T.7 (4.4.3.3)DROP TESTANNEX T.8 (4.4.3.8)STRESS RELIEF TEST | 2020-03-31 | |
ITAV | IEC 62368-1:2014 | Accepted clauses as below:5.4.1.4, Annex B.2MAXIMUM OPERATING TEMPERATURE FOR MATERIALS,COMPONENTS AND SYSTEMS6.2.2.2, 6.2.2.3POWER MEASUREMENTS6.2.3.2RESISTIVE PIS DETERMINATION9.0THERMAL BURN INJURYANNEX B.2.5INPUT TEST: SINGLE PHASEANNEX B.2.6OPERATING TEMPERATURE MEASUREMENTCONDITIONSANNEX B.3SIMULATED ABNORMAL OPERATING CONDITIONSANNEX B.4SIMULATED SINGLE FAULT CONDITIONSANNEX F.3.10 – TEST FOR THE PERMANENCE OFMARKINGSANNEX M.3.2PROTECTION CIRCUITS FOR BATTERIESANNEX M.4.2SECONDARY LITHIUM BATTERY CHARGING SAFEGUARDSANNEX M.4.4 (ANNEX T.7)DROP TEST OF EQUIPMENT CONTAINING A SECONDARYLITHIUM BATTERYANNEX M.5 (ANNEX P.2.3)RISK OF BURN DUE TO SHORT‐CIRCUIT DURINGCARRYINGANNEX Q.1LIMITED POWER SOURCEANNEX T.4 (4.4.4.2)STEADY FORCE TEST, 100 NANNEX T.7 (4.4.4.3)DROP TESTANNEX T.8 (4.4.4.1, 4.4.4.7, 4.8.4.2, 8.6.1, 8.7.2, 8.10.6,G.7.3.2.4)STRESS RELIEF TEST | 2019-10-08 | |
OFF | IEC 60950-1:2005 | Accepted clauses as below:1.6.2INPUT TEST1.7.11DURABILITY OF MARKING TEST2.1.1.5, 2.1.2, 1.2.8.10ENERGY HAZARD MEASUREMENTS2.5LIMITED POWER SOURCE MEASUREMENTS4.2.1‐4.2.4STEADY FORCE TESTS4.2.6, 4.2.1DROP TEST4.2.7, 4.2.1STRESS RELIEF TEST4.3.8BATTERY TESTS4.5.1, 1.4.12, 1.4.13HEATING TEST5.3.1, 5.3.4, 5.3.7COMPONENT FAILURE TEST | 2019-10-08 | |
OFF | IEC 60950-1:2005/AMD1:2009 | Accepted clauses as below:1.6.2INPUT TEST1.7.11DURABILITY OF MARKING TEST2.1.1.5, 2.1.2, 1.2.8.10ENERGY HAZARD MEASUREMENTS2.5LIMITED POWER SOURCE MEASUREMENTS4.2.1‐4.2.4STEADY FORCE TESTS4.2.6, 4.2.1DROP TEST4.2.7, 4.2.1STRESS RELIEF TEST4.3.8BATTERY TESTS4.5.1, 1.4.12, 1.4.13HEATING TEST5.3.1, 5.3.4, 5.3.7COMPONENT FAILURE TEST | 2019-10-08 | |
OFF | IEC 60950-1:2005/AMD2:2013 | Accepted clauses as below:1.6.2INPUT TEST1.7.11DURABILITY OF MARKING TEST2.1.1.5, 2.1.2, 1.2.8.10ENERGY HAZARD MEASUREMENTS2.5LIMITED POWER SOURCE MEASUREMENTS4.2.1‐4.2.4STEADY FORCE TESTS4.2.6, 4.2.1DROP TEST4.2.7, 4.2.1STRESS RELIEF TEST4.3.8BATTERY TESTS4.5.1, 1.4.12, 1.4.13HEATING TEST5.3.1, 5.3.4, 5.3.7COMPONENT FAILURE TEST | 2019-10-08 |