MICRO‐STAR INTERNATIONAL CO LTD
MICRO‐STAR INTERNATIONAL CO LTD
| Address(es) |
|
| Website | Not available |
| Status | MEMBER |
| Acceptance date | 2011-07-25 |
Further information
Stage | Country | Name |
|---|---|---|
2 | Denmark |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
ITAV | IEC 62368-1:2018 | 4.4.3.2, ANNEX T.4 - STEADY FORCE TEST, 100 N4.4.3.2, ANNEX T.5 - STEADY FORCE TEST, 250 N4.4.3.2, ANNEX T.3 - STEADY FORCE TEST, 30 N4.4.3.3, ANNEX T.7 - DROP TEST4.4.3.4, ANNEX T.6 - IMPACT TEST4.4.3.8, ANNEX T.8 - STRESS RELIEF TEST4.8.3 – EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: COMPARTMENT OPENING TORQUE TEST4.8.4.2, ANNEX T.8 – EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: STRESS RELIEF TEST4.8.4.3 – EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: BATTERY REPLACEMENT TEST4.8.4.4 – EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: DROP TEST4.8.4.5 – EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: IMPACT TEST4.8.4.6 – EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: CRUSH TEST4.8.5 – EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: COMPLIANCE 485.2.2.1-5.2.2.6 – CLASSIFICATION OF ELECTRICAL ENERGY SOURCES5.4.8 Humidity conditioning5.4.9.1 – ELECTRIC STRENGTH TEST – TYPE TESTING OF SOLID INSULATION5.4.10, 5.4.10.2.2 – SAFEGUARDS AGAINST TRANSIENT VOLTAGES FROM EXTERNAL CIRCUITS: IMPULSE TEST5.4.10, 5.4.10.2.3 – SAFEGUARDS AGAINST TRANSIENT VOLTAGES FROM EXTERNAL CIRCUITS: STEADY STATE TEST5.4.1.4, Annex B.2 - MAXIMUM OPERATING TEMPERATURE FOR MATERIALS, COMPONENTS AND SYSTEMS6.2.2.2, 6.2.2.3 - POWER MEASUREMENTS6.6 - TEST TO DETERMINE DELIVERED POWER: PS2 DETERMINATION8.6.2 - STATIC STABILITY8.6.4 – GLASS SLIDE TEST8.6.5 – HORIZONTAL FORCE TEST8.7 – WALL, CEILING, OR OTHER STRUCTURE MOUNTING TESTSB.2.5 - INPUT TESTB.2.6 - NORMAL OPERATING CONDITIONS TEMPERATURE MEASUREMENTB.3 - SIMULATED ABNORMAL OPERATING CONDITIONSB.4 - SIMULATED SINGLE FAULT CONDITIONSANNEX F.3.10 – TEST FOR THE PERMANENCE OF MARKINGSG.5.4.6 - LOCKED-ROTOR OVERLOAD TEST FOR D.C. MOTORSG.5.4.6.3 - ALTERNATIVE LOCKED-ROTOR OVERLOAD TEST FOR D.C. MOTORSANNEX M.3.2 – PROTECTION CIRCUITS FOR BATTERIESANNEX Q.1 - LIMITED POWER SOURCEANNEX T.2 , 5.4.2.6, 5.4.3.2, G.15.3.6 – STEADY FORCE TEST, 10 N | 2020-08-21 | |
ITAV | IEC 62368-1:2014 | 4.4.4.2, ANNEX T.4 - STEADY FORCE TEST, 100 N4.4.4.2, ANNEX T.5 - STEADY FORCE TEST, 250 N4.4.4.3, ANNEX T.7 - DROP TEST4.4.4.4, ANNEX T.6 - IMPACT TEST4.4.4.7, ANNEX T.8 - STRESS RELIEF TEST4.8.4.2, ANNEX T.8 – PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: STRESS RELIEF TEST4.8.4.3 – PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: BATTERY REPLACEMENT TEST4.8.4.4 – PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: DROP TEST4.8.4.5 – PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: IMPACT TEST4.8.4.6 – PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: CRUSH TEST4.8.5 – PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: COMPLIANCE5.2, 5.7 Classification of electrical energy sources5.4.1.4, B.2 Maximum operating temperature for materials, components and systems5.4.8 Humidity conditioning5.4.9 Electric strength test5.4.10, 5.4.10.2.2 Safeguards against transient voltages from external circuits: impulse test5.4.10, 5.4.10.2.3 Safeguards against transient voltages from external circuits: steady state test5.6.6.2 (a) Resistance of the protective bonding system6.2.2.2, 6.2.2.3 - POWER MEASUREMENTS6.3 - NORMAL OPERATING CONDITIONS TEMPERATURE TEST6.4.3, ANNEX B.4 - REDUCTION OF THE LIKELIHOOD OF IGNITION UNDER SINGLE FAULT CONDITIONS6.4.3.3 - REDUCTION OF THE LIKELIHOOD OF IGNITION - TEMPERATURES LIMITED BY FUSES6.6 - TEST TO DETERMINE DELIVERED POWER: PS2 DETERMINATION8.6.2 - STATIC STABILITY8.6.4 – GLASS SLIDE TEST8.6.5 – HORIZONTAL FORCE TEST8.7- WALL OR CEILING MOUNTING TESTSB.2.5 - INPUT TESTB.2.6 - NORMAL OPERATING CONDITIONS TEMPERATURE MEASUREMENTB.3 - SIMULATED ABNORMAL OPERATING CONDITIONSB.4 - SIMULATED SINGLE FAULT CONDITIONSANNEX F.3.10 – TEST FOR THE PERMANENCE OF MARKINGSG.5.4.6 - LOCKED-ROTOR OVERLOAD TEST FOR D.C. MOTORSANNEX M.3.2 – PROTECTION CIRCUITS FOR BATTERIESANNEX Q.1 - LIMITED POWER SOURCEANNEX T.2 , 5.4.2.6, 5.4.3.2, G.15.3.6 – STEADY FORCE TEST, 10 N | 2019-08-28 | |
ITAV | IEC 62368-3:2017 | 5.3.1 DC Power transfer interconnection to building wiring5.3.2 DC power transfer interconnection to other equipment5.4.1 Requirement for the PSE5.4.2 Requirement for the PD | 2020-08-21 | |
OFF | IEC 60950-1:2005 | 1.6.2 - INPUT TEST: SINGLE - PHASE1.7.11 - DURABILITY OF MARKING TEST2.1.1.5, 2.1.2, 1.2.8.10 - ENERGY HAZARD MEASUREMENTS2.2.2, 2.2.3, 2.2.4, PART 22 6.1 - SELV RELIABILITY TEST2.6.3.4, 2.6.1 - PROTECTIVE BONDING TEST 2.5 - Limited Power Source Measurements2.9.1, 2.9.2, 5.2.2 HUMIDITY TEST4.1 - STABILITY TESTS4.2.1-4.2.4 - STEADY FORCE TESTS4.2.5, 4.2.1, PART 22.10.2 - IMPACT TEST4.2.6, 4.2.1 - DROP TEST4.2.7, 4.2.1 - Stress Relief Test4.2.10 - LOADING TESTS – WALL AND CEILING MOUNTED EQUIPMENT4.3.8 - BATTERY TESTS4.3.8 - LITHIUM BATTERY REVERSE CURRENT MEASUREMENT TEST4.4.2, .4.4 - HAZARDOUS MOVING PARTS TEST4.5.1, 1.4.12, 1.4.13 - HEATING TEST5.1, ANNEX D - TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM)5.2.2 - ELECTRIC STRENGTH TEST5.3.1, 5.3.4, 5.3.7 - COMPONENT FAILURE TEST5.3.1 - ABNORMAL OPERATON TESTS5.3.7 - OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST6.2.2 (6.2.2.1) - Electric Strength Test Procedure - Impulse Test6.2.2 (6.2.2.2) - Electric Strength Test Procedure ‐ Steady‐State TestANNEX B.7 - LOCKED –ROTOR OVERLOAD TEST FOR DC MOTORS IN SECONDARY | 2019-08-28 | |
OFF | IEC 60950-1:2005/AMD1:2009 | 1.6.2 - INPUT TEST: SINGLE - PHASE1.7.11 - DURABILITY OF MARKING TEST2.1.1.5, 2.1.2, 1.2.8.10 - ENERGY HAZARD MEASUREMENTS2.2.2, 2.2.3, 2.2.4, PART 22 6.1 - SELV RELIABILITY TEST2.6.3.4, 2.6.1 - PROTECTIVE BONDING TEST 2.5 - Limited Power Source Measurements2.9.1, 2.9.2, 5.2.2 HUMIDITY TEST4.1 - STABILITY TESTS4.2.1-4.2.4 - STEADY FORCE TESTS4.2.5, 4.2.1, PART 22.10.2 - IMPACT TEST4.2.6, 4.2.1 - DROP TEST4.2.7, 4.2.1 - Stress Relief Test4.2.10 - LOADING TESTS – WALL AND CEILING MOUNTED EQUIPMENT4.3.8 - BATTERY TESTS4.3.8 - LITHIUM BATTERY REVERSE CURRENT MEASUREMENT TEST4.4.2, .4.4 - HAZARDOUS MOVING PARTS TEST4.5.1, 1.4.12, 1.4.13 - HEATING TEST5.1, ANNEX D - TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM)5.2.2 - ELECTRIC STRENGTH TEST5.3.1, 5.3.4, 5.3.7 - COMPONENT FAILURE TEST5.3.1 - ABNORMAL OPERATON TESTS5.3.7 - OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST6.2.2 (6.2.2.1) - Electric Strength Test Procedure - Impulse Test6.2.2 (6.2.2.2) - Electric Strength Test Procedure ‐ Steady‐State TestANNEX B.7 - LOCKED –ROTOR OVERLOAD TEST FOR DC MOTORS IN SECONDARY | 2019-08-28 | |
OFF | IEC 60950-1:2005/AMD2:2013 | 1.6.2 - INPUT TEST: SINGLE - PHASE1.7.11 - DURABILITY OF MARKING TEST2.1.1.5, 2.1.2, 1.2.8.10 - ENERGY HAZARD MEASUREMENTS2.2.2, 2.2.3, 2.2.4, PART 22 6.1 - SELV RELIABILITY TEST2.6.3.4, 2.6.1 - PROTECTIVE BONDING TEST 2.5 - Limited Power Source Measurements2.9.1, 2.9.2, 5.2.2 HUMIDITY TEST4.1 - STABILITY TESTS4.2.1-4.2.4 - STEADY FORCE TESTS4.2.5, 4.2.1, PART 22.10.2 - IMPACT TEST4.2.6, 4.2.1 - DROP TEST4.2.7, 4.2.1 - Stress Relief Test4.2.10 - LOADING TESTS – WALL AND CEILING MOUNTED EQUIPMENT4.3.8 - BATTERY TESTS4.3.8 - LITHIUM BATTERY REVERSE CURRENT MEASUREMENT TEST4.4.2, .4.4 - HAZARDOUS MOVING PARTS TEST4.5.1, 1.4.12, 1.4.13 - HEATING TEST5.1, ANNEX D - TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM)5.2.2 - ELECTRIC STRENGTH TEST5.3.1, 5.3.4, 5.3.7 - COMPONENT FAILURE TEST5.3.1 - ABNORMAL OPERATON TESTS5.3.7 - OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST6.2.2 (6.2.2.1) - Electric Strength Test Procedure - Impulse Test6.2.2 (6.2.2.2) - Electric Strength Test Procedure ‐ Steady‐State TestANNEX B.7 - LOCKED –ROTOR OVERLOAD TEST FOR DC MOTORS IN SECONDARY | 2019-08-28 |