Juniper Networks India Pvt Ltd
Juniper Networks India Pvt Ltd
Address(es) |
|
Website | Not available |
Status | MEMBER |
Acceptance date | 2018-06-19 |
Further information
Stage | Country | Name |
---|---|---|
1 | Japan |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
---|---|---|---|---|
ITAV | IEC 62368-1:2023 | Following tests are excluded in the scope as products under scope does not require these tests due to its design:4.1.4 Equipment Installation (Outdoor), Conditioning4.1.8 Liquids, refrigerants and liquid filled components (LFCs)4.7 Direct insertion into mains socket-outlets4.8 Lithium coin / button cell batteries5.4.1.5.3 Thermal cycling test procedure5.4.1.8 Working voltages5.4.1.10 Thermoplastic parts5.4.2 & 5.4.3 Clearances and Creepage distances5.4.4.6.5 Mandrel test5.4.5 Antenna terminal insulation5.4.7 Semiconductor components and for cemented joints5.4.8 Humidity conditioning5.4.11 Safeguard against transient voltages 5.5.2.2 Capacitor discharge6.3 Safeguards against fire6.4.6 Control of fire spread in a PS3 circuit8.5.5 High pressure lamp8.6 Stability8.7 Wall/ceiling mounted equipment8.8 Handle strength8.9 Wheels or caster8.12 Telescoping or rod antennas10. RadiationAnnex C, UV radiationAnnex D, Impulse test generatorsAnnex E, Test conditions for equipment containing audio amplifiersAnnex G.5.3.4 Test for FIWAnnex G.7 Mains Supply CordsAnnex G.9 IC Current limitersG.13.6 Tests on coated printed boards G.15 Pressurized liquid filled components or LFC assembliesAnnex H, Telephone ringing signals.Annex J Insulated winding wires for use without interleaved insulation.Annex M, Equipment containing batteries and their protection circuitsAnnex N, Electrochemical potentials (V)Annex O, Measurement of creepage distances and clearances.Annex P.4 Metallized coatings and adhesives securing partsAnnex R Limited Short-circuit testAnnex S, Resistance to heat and fire.Annex T.7 Drop TestAnnex T.8 Stress Relief TestAnnex T10 Fragmentation TestAnnex U, Mechanical strength of CRTsAnnex X, Alternative method for determining clearances.Annex Y, requirements for outdoor enclosures | 2025-01-10 | |
ITAV | IEC 62368-1:2018 | Following tests are excluded in the scope as products under scope does not require these tests due to its design:4.1.4 Equipment Installation (Outdoor), Conditioning4.1.8 Liquids, refrigerants and liquid filled components (LFCs)4.7 Direct insertion into mains socket-outlets4.8 Lithium coin / button cell batteries5.4.1.5.3 Thermal cycling test procedure5.4.1.8 Working voltages5.4.1.10 Thermoplastic parts5.4.2 & 5.4.3 Clearances and Creepage distances5.4.4.6.5 Mandrel test5.4.5 Antenna terminal insulation5.4.7 Semiconductor components and cemented Joints5.4.8 Humidity conditioning5.4.11 Safeguard against transient voltages from external circuits5.5.2 Capacitor discharge6.3 Safeguards against fire6.4.6 Control of fire spread in a PS3 circuit8.5.5 High pressure lamp8.6 Stability8.7 Wall/ceiling mounted equipment8.8 Handle strength8.9 Wheels or caster8.12 Telescoping or rod antennas10. RadiationAnnex G.5.3.4 Test for FIWAnnex G.7 Mains Supply CordsAnnex G.9 IC Current limitersG.13.6 Tests on coated printed boards G.15 Pressurized liquid filled components or LFC assembliesAnnex H, Telephone ringing signalsAnnex J Insulated winding wires for use without interleaved insulation.Annex P.4 Metallized coatings and adhesives securing partsAnnex R Limited Short-circuit testAnnex S, Resistance to heat and fireAnnex T.7 Drop TestAnnex T.8 Stress Relief TestAnnex T10 Fragmentation Test | 2022-01-14 | |
ITAV | IEC 62368-1:2014 | Following tests are excluded in the scope as products under scope does not require these tests due to its design:4.7 Direct insertion into mains socket-outlets4.8 Lithium coin / button cell batteries5.4.1.8 Working voltages5.4.1.10 Thermoplastic parts5.4.2 & 5.4.3 Clearances and Creepage distances5.4.5 Antenna terminal insulation5.4.7 Semiconductor components and cemented joints5.4.8 Humidity conditioning5.4.11 Safeguard against transient voltages from external circuits5.5.2 Capacitor discharge6.3 Safeguards against fire8.5.5 High pressure lamp8.6 Stability8.7 Wall/ceiling mounted equipment8.8 Handle strength8.9 Wheels or caster10. RadiationAnnex H, Telephone ringing signalsAnnex S, Resistance to heat and fire | 2021-01-28 | |
OFF | IEC 60950-1:2005 | IEC 60950-1:2005 including all amendmendsFollowing tests are excluded from the scope as products under scope do not require these tests due to their design:2.1.1.9 Audio Amplifiers2.9.2 Humidity conditioning (exemption claimed due to design)2.10.9 & 2.10.10 & 2.10.11 (and 2.10.8.2) Thermal cycling and thermal ageing3.2.6: Cord anchorages and strain relief4.1 Stability Test (Inclined plane set-up)4.2.6 Drop Test4.2.7 Stress relief test4.2.8 Cathode ray tubes4.2.10 Wall or ceiling mounted equipment4.3.6 Direct plug-in equipment4.3.12 Flammable liquids4.3.13.2 Ionizing radiation4.3.13.3 Effect of UV radiation on materials4.3.13.4 Human exposure to UV radiation4.3.13.5.1 Laser (including laser diodes)4.5.5 Resistance to abnormal heat4.7.3 Materials | 2018-06-19 |