HP Printing and Computing Solutions S.L.U.
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
ITAV | IEC 62368-1:2023 | Accepted clauses of IEC 62368—1 4th Ed.5.4.1.4; 6.3.2; 9.0; B.2.6 Maximum operatingtemperatures for materials, components andsystems5.4.1.10.3 Ball pressure test of thermoplastics5.4.2 Clearances5.4.3 Creepage distances5.4.4 Solid insulation5.4.8 Humidity conditioning5.4.9 Electric strength test5.5.2.2 Capacitor discharge after disconnection of aconnector5.6.6 Resistance of the protective bonding system5.7. Prospective touch voltage, touch current andprotective conductor current6.2.2 Power source circuit classifications (PS)6.2.3 Classification of potential ignition sources(Arcing and Resistive PIS)6.4.3 Reduction of the likelihood of ignition under single fault conditions in PS2 circuits and PS3 circuits8.5 Safeguards against moving parts8.6.2 Static stability8.6.3 Relocation stability8.9 Wheels or casters attachment requirements8.10.3 Cart, stand or carrier loading test and compliance criteriaB.2.5 Input testB.3 Simulated abnormal operating conditionsB.4 Simulated single fault conditionsAnnex F Equipment markings, instructions, and instructional safeguards.Annex G.5.4 Motors Annex K.6 Mechanically operated safety interlocksAnnex K.7 Interlock circuit isolationAnnex L Disconnected deviceAnnex M Equipment containing batteries and their protection circuitsAnnex P Safeguards against conductive objectsAnnex Q.1 Circuits intended for interconnectionwith building wiring (LPS)Annexes T.2; T.3; T.4, T.5 Steady force testAnnexes T.6; T.7, T.8, T.9 Impact testsAnnex V Determination of accessible parts | 2024-03-30 | |
ITAV | IEC 62368-1:2018 | 5.4.1.4; 6.3.2; 9.0; B.2.6 Maximum operating temperatures for materials, components and systems 5.4.1.10.3 Ball pressure test of thermoplastics5.4.2 Clearances5.4.3 Creepage distances5.4.4 Distances through insulation measurements5.4.9 Electric strength test5.5.2.2 Stored discharge on capacitors5.6.6.2 Resistance of protective conductors and terminations5.7.2.2; 5.7.4 Earthed accessible conductive part6.2.2 Electrical power sources (PS) measurements for classification6.2.3.1 Determination of Potential Ignition Sources (Arcing PIS)6.2.3.2 Determination of Potential Ignition Sources (Resistive PIS)B.2.5 Input testB.3 Abnormal operating conditionsB.4 Fault condition testsAnnex Q.1 Circuits intended for interconnection with building wiring (LPS)Annexes T.2; T.3; T.5Steady force testAnnexes T.6; T.9 Impact testsT.8 Stress relief tests | 2020-01-29 | |
ITAV | IEC 62368-1:2014 | Accepted clauses of IEC 62368-1 2nd Ed.5.4.1.4; 6.3.2; 9.0; B.2.6 Maximum operatingtemperatures for materials, components and systems5.4.1.10.3 Ball pressure test of thermoplastics5.4.2 Clearances5.4.3 Creepage distances5.4.4 Distances through insulation measurements5.4.9 Electric strength test5.5.2.2 Stored discharge on capacitors5.6.6.2 Resistance of protective conductors and terminations5.7.2.2; 5.7.4 Earthed accessible conductive part6.2.2 Electrical power sources (PS) measurements forclassification6.2.3.1 Determination of Potential Ignition Sources (ArcingPIS)6.2.3.2 Determination of Potential Ignition Sources(Resistive PIS)B.2.5 Input testB.3 Abnormal operating conditionsB.4 Fault condition testsAnnex Q.1 Circuits intended for interconnection withbuilding wiring (LPS)Annexes T.2; T.3; T.5Steady force testAnnexes T.6; T.9 Impact testsT.8 Stress relief tests | 2017-01-16 | |
OFF | IEC 60950-1:2005 | Accepted clausesApplicable Clauses of IEC 60950-1 2nd Ed1.6.2 Input current (see appended table 1.6.2)2.1 Protection from electric shock and energy hazards2.1.1.5 Energy hazards2.1.1.7 Discharge of capacitors in equipment2.5 Limited power sources2.6.3.4 Resistance of earthing conductors and their terminations; resistance (W), voltage drop (V), test current (A), duration (min):2.8 Safety interlocks2.9 Electrical insulation2.10 Clearances, creepage distances and distances through insulation4.1 Stability4.2 Mechanical strength4.4 Protection against hazardous moving parts4.5 Thermal requirements4.7 Resistance to fire5.1 Touch current and protective conductor current5.2 Electric strength5.3 Abnormal operating and fault conditionsB ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS(4.7.2 & 5.3.2) | 2016-07-27 | |
OFF | IEC 60950-1:2005/AMD1:2009 | Accepted clausesApplicable Clauses of IEC 60950-1 2nd Ed1.6.2 Input current (see appended table 1.6.2)2.1 Protection from electric shock and energy hazards2.1.1.5 Energy hazards2.1.1.7 Discharge of capacitors in equipment2.5 Limited power sources2.6.3.4 Resistance of earthing conductors and their terminations; resistance (W), voltage drop (V), test current (A), duration (min):2.8 Safety interlocks2.9 Electrical insulation2.10 Clearances, creepage distances and distances through insulation4.1 Stability4.2 Mechanical strength4.4 Protection against hazardous moving parts4.5 Thermal requirements4.7 Resistance to fire5.1 Touch current and protective conductor current5.2 Electric strength5.3 Abnormal operating and fault conditionsB ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS(4.7.2 & 5.3.2) | 2016-07-27 | |
OFF | IEC 60950-1:2005/AMD2:2013 | Accepted clausesApplicable Clauses of IEC 60950-1 2nd Ed1.6.2 Input current (see appended table 1.6.2)2.1 Protection from electric shock and energy hazards2.1.1.5 Energy hazards2.1.1.7 Discharge of capacitors in equipment2.5 Limited power sources2.6.3.4 Resistance of earthing conductors and their terminations; resistance (W), voltage drop (V), test current (A), duration (min):2.8 Safety interlocks2.9 Electrical insulation2.10 Clearances, creepage distances and distances through insulation4.1 Stability4.2 Mechanical strength4.4 Protection against hazardous moving parts4.5 Thermal requirements4.7 Resistance to fire5.1 Touch current and protective conductor current5.2 Electric strength5.3 Abnormal operating and fault conditionsB ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS(4.7.2 & 5.3.2) | 2016-07-27 |