Hangzhou Hikvision Digital Technology Co., Ltd.
Hangzhou Hikvision Digital Technology Co., Ltd.
| Address(es) |
|
| Website | Not available |
| Status | WITHDRAWN |
| Acceptance date | 2018-01-19 |
Further information
Stage | Country | Name |
|---|---|---|
2 | Japan |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
ITAV | IEC 62368-1:2014 | All clauses except Clause 4.7 Equipment for direct insertion into mains socket-outlets; Clause 5.4.1.7 Insulation in circuits generating starting pulses; Clause 5.4.1.10.2 Compliance criteria; Clause 5.4.2.3.2.5 Determining transient voltage levels by measurement; Clause 5.4.3.3 Material group and CTI; Clause 5.4.4.4 Solid insulation in semiconductor devices; Clause 5.4.4.5 Insulating compound forming cemented joints; Clause 5.4.4.6.3 Non-separable thin sheet material; Clause 5.4.4.6.4 Standard test procedure for non-separable thin sheet material; Clause 5.4.4.7 Solid insulation in wound components; Clause 5.4.4.9 Solid insulation requirements at frequencies higher than 30 kHz; Clause 5.4.5 Antenna terminal insulation; Clause 5.4.7 Tests for semiconductor components and for cemented joints; Clause 5.4.10 Safeguards against transient voltages from external circuits; Clause 5.5 Components as safeguards; Clause 8.5.4 Special categories of equipment comprising moving parts; Clause 8.5.5 High pressure lamps; Clause 8.6.4 Glass slide test; Clause 8.8 Handle strength; Clause 10 Radiation; Annex M.6 Prevention of short-circuits and protection from other effects of electric current; Annex M.7 Risk of explosion from lead acid and NiCd batteries; Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte; Annex S.1 Flammability test for fire enclosure and fire barrier materials of equipment where the steady-state power does not exceed 4000 W; Annex S.2 Flammability test for fire enclosure and fire barrier integrity; Annex S.3 Flammability tests for the bottom of a fire enclosure; Annex T.10 Glass fragmentation test. | 2018-01-19 | |
OFF | IEC 60950-1:2005 | IEC 60950-1:2005 including all amendmends. All clauses except Clause 2.7.4 Three phase equipment; Clause 2.10.3.9 Measurement of transient voltages; Clause 2.10.4.2 Material group and comparative tracking index; Clause 2.10.5.4 Semiconductor devices; Clause 2.10.5.8 Non-separable thin sheet material; Clause 2.10.5.11 Insulation in wound components; Clause 2.10.5.12 Wire in wound components; Clause 2.10.5.13 Wire with solvent-based enamel in wound components; Clause 2.10.5.14 Additional insulation in wound components; Clause 2.10.6 Construction of printed boards; Clause 2.10.7 Component external terminations; Clause 2.10.8 Tests on coated printed boards and coated components; Clause 2.10.9 Thermal cycling; Clause 2.10.10 Test for Pollution Degree 1 environment and for insulating compound; Clause 2.10.11 Test for semiconductor devices and for cemented joints; Clause 2.10.12 Enclosed and sealed parts; Clause 3.2.9 Supply wiring space; Clause 4.2.8 Cathode ray tubes; Clause 4.2.9 High pressure lamps; Clause 4.7.3.1 Glow wire test; Clause 4.7.3.6 Needle flame test; | 2018-01-19 | |
TRON | IEC 60065:2014 | All clauses except Clause 7.2 Heat resistance of insulating material; Clause 8.16 Requirements for insulated winding wires for use without additional interleaved insulation; Clause 8.17 Endurance test for wound components with insulated winding wires without additional interleaved insulation; Clause 8.21 Test specifications of non-separable thin sheet material; Clause 10.2 Surge test; Clause 10.3 large than 100cm X 100cm X180cm size equipment; Clause 12.3 Remote control devices held in hand; Clause 12.5 Antenna coaxial sockets mounted on the apparatus; Clause 12.6 Telescoping or rod antennas; Clause 13.3.4 Measurement of transient voltages; Clause 13.4 Tracking Test; Clause 15.1 Plugs and sockets; Clause 15.3 Terminals for external fiexible cords and for permanent connection to the mains supply; Clause 15.4 Devices forming a part of the mains plug; Clause 16.3 b) The test of bending and other mechanical stresses occurring during intended use; Clause 16.5The test of strain and twist relief; Clause 19.5 Edges or corners test; Clause 19.6 Fragmentation test; Annex G Needle Flame test | 2018-01-19 |