Flextronics Systems (Penang) SDN BHD
Flextronics Systems (Penang) SDN BHD
| Address(es) |
|
| Website | Not available |
| Status | MEMBER |
| Acceptance date | 2022-06-15 |
Further information
Stage | Country | Name |
|---|---|---|
3 | United States of America |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
ITAV | IEC 62368-1:2018 | 4.4.3.2, Annex T.3 STEADY FORCE TEST, 30N FOR SAFEGUARD THAT ACTS AS FIRE ENCLOSURE/BARRIER ONLY4.4.3.2, Annex T.4 STEADY FORCE TEST, 100N4.4.3.2, Annex T.5 STEADY FORCE TEST, 250N4.4.3.3, Annex T.7 DROP TEST4.4.3.4, Annex T.6, Annex Y 6.2 IMPACT TEST4.4.3.5, Annex T.3 STEADY FORCE TEST FOR INTERNAL ENCLOSURE AND BARRIER4.4.3.6, Annex T.9 GLASS IMPACT TEST4.4.3.7, Annex T.9 GLASS FIXATION TEST4.4.3.8, Annex T.8 STRESS RELIEF TEST4.4.3.10, Annex T.10 GLASS FRAGMENTATION4.8.4.3 EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: BATTERY REPLACEMENT TEST4.8.4.4 EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: DROP TEST4.8.4.5 EQUIPMENT CONTAINING COIN/BUTTON CELL BATTERIES: IMPACT TEST4.8.4.6 PRODUCTS CONTAINING COIN/BUTTON CELL BATTERIES: CRUSH TEST4.8.5 PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES - COMPLIANCE4.9, ANNEX P LIKELIHOOD OF FIRE OR SHOCK DUE TO ENTRY OF CONDUCTIVE OBJECT5.2.2.1 - 5.2.2.6 CLASSIFICATION OF ELECTRICAL ENERGY SOURCES5.2.2.7, 5.3.2.4 AUDIO OUTPUT VOLTAGE MEASUREMENT AND DETERMINATION OF ACCESSIBILITY TO PARTS OF TERMINALS USING STRIPPED WIRES5.3.2.2 ACCESSIBILITY TO ELECTRICAL ENERGY SOURCES AND SAFEGUARDS5.4.1.10.3 BALL PRESSURE TEST5.4.1.4, ANNEX B.2 MAXIMUM OPERATING TEMPERATURES FOR MATERIALS, COMPONENTS AND SYSTEMS5.4.1.8 DETERMINATION OF WORKING VOLTAGE5.4.2.2, 5.4.2.4, 5.4.3 MINIMUM CLEARANCES / CREEPAGE DISTANCE5.4.2.3 MINIMUM CLEARANCES DISTANCES USING REQUIRED WITHSTAND VOLTAGE5.4.2.3.2.5 DETERMINING TRANSIENT VOLTAGE LEVELS BY MEASUREMENT5.4.2.4 MINIMUM CLEARANCE BASED UPON ELECTRIC STRENGTH TEST5.4.4.2, 5.4.4.5 C, 5.4.4.9 DISTANCE THROUGH INSULATION MEASUREMENT5.4.4.6.2 SEPARABLE THIN SHEET MATERIAL5.4.7, 5.4.1.5.3 TESTS FOR SEMICONDUCTOR COMPONENTS AND FOR CEMENTED JOINTS5.4.8 HUMIDITY CONDITIONING5.4.9 ELECTRIC STRENGTH TEST5.5.2.2 CAPACITOR DISCHARGE AFTER DISCONNECTION OF A CONNECTOR5.6.6.2 RESISTANCE OF THE PROTECTIVE BONDING SYSTEM5.6.6.2 A) RESISTANCE OF THE PROTECTIVE BONDING SYSTEM - 25 A OR LESS5.7.4 TOUCH CURRENT MEASUREMENT - UNEARTHED ACCESSIBLE PARTS5.7.5 EARTHED ACCESSIBLE CONDUCTIVE PARTS5.7.6 PROTECTIVE CONDUCTOR CURRENT6.2.2.2, 6.2.2.3 POWER MEASUREMENTS6.2.3.1 ARCING PIS6.2.3.2 RESISTIVE PIS6.4.2, Annex B.4 SINGLE FAULT CONDITIONS - REDUCE THE LIKELIHOOD OF IGNITION6.4.3 REDUCTION OF THE LIKELIHOOD OF IGNITION UNDER SINGLE FAULT CONDITIONS IN PS2 CIRCUITS AND PS3 CIRCUITS6.4.3.2 REDUCTION OF THE LIKELIHOOD OF IGNITION - TEMPERATURES LIMITED BY FUSESANNEX Q.1 LIMITED POWER SOURCE6.6 TEST TO DETERMINE DELIVERED POWER - PS2 DETERMINATION8.6 STABILITY TEST8.7 WALL, CEILING OR OTHER STRUCTURE8.8 HANDLE STRENGTH TEST8.5.3, ANNEX T.8, ANNEX V ACCESSIBILITY TO MOVING PARTS8.6.2 STATIC STABILITY TEST8.6.3 RELOCATION STABILITY TEST8.6.4 GLASS SLIDE TEST8.6.5 HORIZONTAL FORCE TEST9.3 TOUCH TEMPERATURE TESTANNEX B.1.5, B.2.6, 5.4.1.4, 6.3, 9.3 NORMAL OPERATING CONDITIONS TEMPERATURE MEASUREMENTANNEX B.2.5 INPUT TEST - PRODUCTS CONTAINING AN AUDIO AMPLIFIERANNEX B.2.5 INPUT TEST - SINGLE PHASEANNEX B.2.6 OPERATING TEMPERATURE MEASUREMENT CONDITIONSANNEX B.3 SIMULATED ABNORMAL OPERATING CONDITIONSANNEX B.3.5 MAXIMUM LOAD AT OUTPUT TERMINALSANNEX B.4 SIMULATED SINGLE FAULT CONDITIONSANNEX F.3.10 TEST FOR THE PERMANENCE OF MARKINGSANNEX G.5.3.3 TRANSFORMER OVERLOAD TESTSANNEX G.5.3.3.3 TRANSFORMER OVERLOAD TESTS - ALTERNATIVE TEST METHODANNEX G.5.4.6 LOCKED - ROTOR OVERLOAD TEST FOR DC MOTORSANNEX G.5.4.6.3 ALTERNATIVE LOCKED - ROTOR OVERLOAD TEST FOR DC MOTORSANNEX G.7.3.2 CORD STRAIN RELIEF TESTANNEX G.10.3 RESISTOR TESTANNEX M.3.2 PROTECTION CIRCUITS FOR BATTERIESANNEX M.4.2 CHARGING SAFEGUARDSANNEX M.4.4, ANNEX T.7 DROP TEST OF EQUIPMENT CONTAINING A SECONDARY LITHIUM BATTERYANNEX M.5, ANNEX P.2.3 RISK OF BURN DUE TO SHORT-CIRCUIT DURING CARRYINGANNEX P.2.3 SAFEGUARDS AGAINST THE CONSEQUENCES OF ENTRY OF A FOREIGN OBJECTANNEX P.4.2 | 2022-06-15 | |
ITAV | IEC 62368-1:2014 | 4.8.4.3 PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: BATTERY REPLACEMENT TEST4.8.4.4 PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: DROP TEST4.8.4.5 PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: IMPACT TEST4.8.4.6 PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: CRUSH TEST5.2.2.1 - 5.2.2.6 CLASSIFICATION OF ELECTRICAL ENERGY SOURCES5.2.2.7, 5.3.2.4 AUDIO OUTPUT VOLTAGE MEASUREMENT AND DETERMINATION OF ACCESSIBILITY TO PARTS OF TERMINALS USING STRIPPED WIRES5.4.1.4, ANNEX B.2 MAXIMUM OPERATING TEMPERATURE FOR MATERIALS, COMPONENTS AND SYSTEMS5.4.1.5.2, 5.4.1.5.3 TEST FOR POLLUTION DEGREE 1 ENVIRONMENT AND FOR AN INSULATING COMPOUND5.4.1.8 DETERMINATION OF WORKING VOLTAGE5.4.1.10.3 BALL PRESSURE TEST5.4.2.4 DETERMINING THE ADEQUACY OF A CLEARANCE USING AN ELECTRICAL STRENGTH TEST5.4.7, 5.4.1.5.3 TESTS FOR SEMICONDUCTOR COMPONENTS AND CEMENTED JOINTS5.4.8 HUMIDITY CONDITIONING5.4.9 ELECTRIC STRENGTH5.5.2.2 SAFEGUARDS AGAINST CAPACITOR DISCHARGE AFTER DISCONNECTION OF A CONNECTOR5.6.6.2 RESISTANCE OF THE PROTECTIVE BONDING SYSTEM5.7 PROSPECTIVE TOUCH VOLTAGE AND TOUCH CURRENT MEASUREMENT5.7.5 PROTECTIVE CONDUCTOR CURRENT6.2.2.2, 6.2.2.3 POWER MEASUREMENTS6.2.3.1 ARCING PIS DETERMINATION6.2.3.2 RESISTIVE PIS DETERMINATION6.3 NORMAL OPERATING CONDITIONS TEMPERATURE TEST6.4.2, ANNEX B.4 SINGLE FAULT CONDITIONS: REDUCE THE LIKELIHOOD OF IGNITION6.4.3, ANNEX B.4 REDUCTION OF THE LIKELIHOOD OF IGNITION UNDER SINGLE FAULT CONDITIONS6.4.3.3 REDUCTION OF THE LIKELIHOOD OF IGNITION - TEMPERATURES LIMITED BY FUSES6.6 TEST TO DETERMINE DELIVERED POWER: PS2 DETERMINATION8.11.3 RACK MOUNTED EQUIPMENT – MOUNTING MEANS: MECHANICAL STRENGTH TEST8.11.4 RACK MOUNTED EQUIPMENT – MOUNTING MEANS: MECHANICAL STRENGTH TEST, 250 N, INCLUDING END STOPS8.5.3, ANNEX T.8, ANNEX V SAFEGUARDS AGAINST MOVING PARTS8.6.2 STATIC STABILITY8.6.3 RELOCATION STABILITY TEST8.6.5 HORIZONTAL FORCE TEST8.6.4 GLASS SLIDE TEST8.7 WALL OR CEILING MOUNTING TESTS8.8 HANDLE STRENGTHANNEX B.2.5 INPUT TEST: PRODUCTS CONTAINING AN AUDIO AMPLIFIERANNEX B.2.5 INPUT TEST: SINGLE PHASEANNEX B.2.6, 5.4.1.4, 6.3, 9.2 NORMAL OPERATING CONDITIONS TEMPERATURE MEASUREMENTANNEX B.3 SIMULATED ABNORMAL OPERATING CONDITIONSANNEX B.4 SIMULATED SINGLE FAULT CONDITIONSANNEX F.3.10 TEST FOR THE PERMANENCE OF MARKINGSANNEX G.5.3.3 TRANSFORMER OVERLOADANNEX G.5.3.3.3 TRANSFORMER OVERLOAD – ALTERNATIVE TEST METHODANNEX G.7.3.2 STRAIN RELIEF TESTANNEX T.2 - T.5 STEADY FORCE TEST (10N, 30N, 100N, 250N)4.4.4.4, ANNEX T.6 IMPACT TEST4.4.4.3, ANNEX T.7 DROP TEST4.4.4.7, ANNEX T.8 STRESS RELIEF TEST4.4.4.6, ANNEX T.9 GLASS IMPACT TESTANNEX G.5.4.6 LOCKED-ROTOR OVERLOAD TEST FOR D.C. MOTORSANNEX G.5.4.6.3 ALTERNATIVE LOCKED -ROTOR OVERLOAD TEST FOR D.C. MOTORSANNEX M.3.2 PROTECTION CIRCUITS FOR BATTERIESANNEX M 4.2 SECONDARY LITHIUM BATTERY CHARGING SAFEGUARDSANNEX M.4.4, ANNEX T.7 DROP TEST OF EQUIPMENT CONTAINING A SECONDARY LITHIUM BATTERYANNEX M.5, ANNEX P.2.3 RISK OF BURN DUE TO SHORT-CIRCUIT DURING CARRYINGANNEX Q.1 LIMITED POWER SOURCE4.4.4.9, ANNEX T.10 GLASS FRAGMENTATION 4.4.4.7, ANNEX T.8 STRESS RELIEF - ALTERNATE TEST PER IEC 60695-10-35.4.1.3 TEST FOR HYGROSCOPIC MATERIALS4.4.4.2, ANNEX T.3 STEADY FORCE TEST, 30 N FOR SAFEGUARD THAT ACTS AS FIRE ENCLOSURE/BARRIER ONLY4.4.4.2, ANNEX T.4 STEADY FORCE TEST, 100 N 4.4.4.2, ANNEX T.5 STEADY FORCE TEST, 250 N ANNEX T.2, 5.4.2.6, 5.4.3.2, ANNEX G.15.3.6 STEADY FORCE TEST, 10 N 4.8.5 PRODUCTS CONTAINING LITHIUM COIN/BUTTON CELL BATTERIES: COMPLIANCE | 2022-06-15 |