EPL

Address(es)
  • Via Ermanno Casoli 2A
    IT-60044 Fabriano
    Italy

Website Not available
Status

MEMBER

Acceptance date 2005-07-19

Further information

Stage

Country

Name

3

Denmark

UL Solutions (Demko)

LEGEND: Scope Limitations
  • RA : Audio amplifiers with audio power > 0,5 Watts excluded
  • RC : Apparatus with connection(s) to a cable distribution system excluded
  • RSH : Shredders excluded
  • RT : Apparatus with connection(s) to a telecommunication network excluded
  • RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
  • ROUT : Equipment intended for installation outdoors excluded
  • RWPT : Wireless power transmitter excluded

Category

Name

Tests/Clauses

Acceptance Date

Responsible National Certification Body

EMC

CISPR 14-1:2020

4.3.3; 5.4.2 & 5.4.3 MEASUREMENT OF DISCONTINUOUS DISTURBANCE (TERMINAL VOLTAGE)4.3.4 & 5.3.3 & 5.4.1 MEASUREMENT OF DISTURBANCE POWER 30 MHZ – 300 MHZ4.3.2 & 4.3.3, 5.4.1 MEASUREMENT OF CONDUCTED DISTURBANCES ON THE MAINS4.3.2, 5.3.2 MEASUREMENT OF MAGNETIC FIELD INDUCED CURRENT 9 kHz – 30 MHz
 2021-11-11

UL Solutions (Demko)

EMC

CISPR 14-1:2016

4.3.2 MEASUREMENT OF MAGNETIC FIELD INDUCED CURRENT 9 kHz – 30 MHz4.3.2 & 4.3.3; 5.4.1 MEASUREMENT OF CONDUCTED DISTURBANCES ON THE MAINS4.3.3; 5.4.2 & 5.4.3 MEASUREMENT OF DISCONTINUOUS DISTURBANCE (TERMINAL VOLTAGE)4.3.4; 5.3.3; 5.4.1 MEASUREMENT OF DISTURBANCE POWER 30 MHZ – 300 MHZ
 2019-11-30

UL Solutions (Demko)

EMC

CISPR 14-2:2020

5.1 ELECTROSTATIC DISCHARGE5.2 FAST TRANSIENTS5.3 INJECTED CURRENTS, 0.15 MHZ TO 230 MHZ5.4 INJECTED CURRENTS, 0.15 MHZ TO 80 MHZ5.6 SURGES5.7 VOLTAGE DIPS
 2021-11-11

UL Solutions (Demko)

EMC

CISPR 14-2:2015

5.1 ELECTROSTATIC DISCHARGE5.2 FAST TRANSIENTS5.3 INJECTED CURRENTS, 0.15 MHZ TO 230 MHZ5.4 INJECTED CURRENTS, 0.15 MHZ TO 80 MHZ5.6 SURGES5.7 VOLTAGE DIPS
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-3-2:2018

All
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-3-2:2018/AMD1:2020

All Clauses
 2021-11-11

UL Solutions (Demko)

EMC

IEC 61000-3-3:2013

ALL CLAUSES
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-3-3:2013/AMD1:2017

ALL CLAUSES
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-3-3:2013/AMD2:2021

ALL CLAUSES
 2021-11-11

UL Solutions (Demko)

EMC

IEC 61000-4-2:2008

ALL CLAUSES
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-4-4:2012

ALL CLAUSES (EXCLUDED TESTS ON SIGNAL AND CONTROL PORTS)
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-4-5:2014

ALL CLAUSES (EXCLUDED TESTS ON SIGNAL AND CONTROL PORTS)
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-4-5:2014/AMD1:2017

ALL CLAUSES (EXCLUDED TESTS ON SIGNAL AND CONTROL PORTS)
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-4-6:2013

ALL CLAUSES (EXCLUDED TESTS ON SIGNAL AND CONTROL PORTS)
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-4-11:2020

ALL CLAUSES
 2020-12-22

UL Solutions (Demko)

EMC

IEC 61000-4-11:2004

ALL CLAUSES
 2019-11-30

UL Solutions (Demko)

EMC

IEC 61000-4-11:2004/AMD1:2017

ALL CLAUSES
 2019-11-30

UL Solutions (Demko)

EMC

IEC 62233:2005

5.1 ELECTRIC FIELDS5.2 FREQUENCY RANGE5.3 MEASURING DISTANCES, POSITIONS AND OPERATING MODE5.4 MAGNETIC FIELD SENSOR5.5 MEASURING PROCEDURES FOR MAGNETIC FIELDS5.6 MEASUREMENT UNCERTAINTY5.7 TEST REPORT
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-1:2010

10 POWER INPUT AND CURRENT11 HEATING13.2 LEAKAGE CURRENT AT OPERATING TEMPERATURE13.3 ELECTRIC STRENGTH AT OPERATING TEMPERATURE15.2 MOISTURE RESISTANCE - SPILLAGE15.3 MOISTURE RESISTANCE - HUMIDITY16.2 LEAKAGE CURRENT AFTER HUMIDITY TREATMENT16.3 ELECTRIC STRENGTH AFTER HUMIDITY TREATMENT17 OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUIS19.10 ABNORMAL OPERATION - SERIES MOTOR19.11.1 ABNORMAL OPERATION - ELECTRONIC CIRCUITS - LOW POWER CIRCUIT19.11.2 ABNORMAL OPERATION - ELECTRONIC CIRCUITS - FAULT CONDITIONS19.11.3 ABNORMAL OPERATION - PROTECTIVE ELECTRONIC CIRCUIT19.11.4.1 ABNORMAL OPERATION – IMMUNITY TO ELECTROSTATIC DISCHARGES19.11.4.3 ABNORMAL OPERATION – IMMUNITY TO FAST TRANSIENTS19.11.4.4 ABNORMAL OPERATION – IMMUNITY TO VOLTAGE SURGES19.11.4.5 ABNORMAL OPERATION – IMMUNITY TO INJECTED CURRENTS19.11.4.6 ABNORMAL OPERATION – IMMUNITY TO VOLTAGE DIPS AND INTERRUPTIONS19.11.4.8 ABNORMAL OPERATION - UNDER VOLTAGE19.12 ABNORMAL OPERATION - MINIATURE FUSE-LINK19.14 ABNORMAL OPERATION - CONTACTOR OR RELAY SHORT CIRCUIT19.7 ABNORMAL OPERATION - STALLED CONDITIONS19.8 ABNORMAL OPERATION – DISCONNECTED PHASE19.9 ABNORMAL OPERATION - RUNNING OVERLOAD20.1 STABILITY AND MECHANICAL HAZARDS - STABILITY20.2 STABILITY AND MECHANICAL HAZARDS - MECHANICAL FORCE21.1 MECHANICAL STRENGTH - SPRING HAMMER TEST21.2 MECHANICAL STRENGTH - SCRATCH TEST22.1 CONSTRUCTION - FIRST IP NUMERAL TEST22.11 CONSTRUCTION - RELIABILITY OF NON-DETACHABLE PARTS FIXING22.12 CONSTRUCTION - HANDLES, KNOBS, GRIPS, LEVERS - AXIAL PULL22.5 CONSTRUCTION - CAPACITOR DISCHARGE TEST22.6 CONSTRUCTION - LEAKAGE OF LIQUID23.3 INTERNAL WIRING - MOVABLE PARTS WIRE FLEXING23.5 INTERNAL WIRING - ELECTRIC STRENGTH TEST24.1.4 COMPONENT - AUTOMATIC CONTROLS TEST24.5 COMPONENT - VOLTAGE ACROSS CAPACITOR25.15, 25.16 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - PUSH, PULL & TORQUE TESTS FOR FLEXIBLE CORD25.2 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - ELECTRIC STRENGTH TEST FOR MULTIPLE SUPPLY25.21 SUPPLY CONNECTION AND EXTERNAL FLEXING CORDS - CONNECTION SPACE FOR PORTABLE APPLIANCES 26.10 TERMINALS FOR EXTERNAL CONDUCTORS – CONNECTION TERMINALS FOR FLAT TWIN TINSEL CORDS26.3 TERMINALS FOR EXTERNAL CONDUCTORS - TERMINAL SECUREMENT TEST26.5 TERMINALS FOR EXTERNAL CONDUCTORS – STRANDED CONDUCTOR27.5 PROVISION FOR EARTHING - VOLTAGE DROP28.1 SCREWS AND CONNECTIONS - SCREW TORQUE TEST29 CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION29.1, 29.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - STEADY FORCE ON INTERNAL BARE CONDUCTORS 29.2, ANNEX N CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - PROOF TRACKING TEST29.3.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION – ELECTRIC STRENGTH TEST ON INSULATION LAYERS30.1 RESISTANCE TO HEAT AND FIRE - BALL PRESSURE TEST30.2 RESISTANCE TO HEAT AND FIRE - GLOW-WIRE TEST30.2.3.2, ANNEX E RESISTANCE TO HEAT AND FIRE - NEEDLE FLAME TEST31 RESISTANCE TO RUSTING7.14 MARKING AND INSTRUCTIONS - MARKING DURABILITY8.1.1 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE B OF IEC610328.1.2 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE 13 OF IEC610328.1.3 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE 41 OF IEC610328.1.4 PROTECTION AGAINST ACCESS TO LIVE PARTS - ACCESSIBLE PART - SELVANNEX C AGING TEST ON MOTORSANNEX D THERMAL MOTOR PROTECTORSANNEX G SAFETY ISOLATING TRANSFORMERSANNEX I MOTORS HAVING BASIC INSULATION THAT IS INADEQUATE FOR THE RATED VOLTAGE OF THE APPLIANCEANNEX K OVERVOLTAGE CATEGORIES
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-1:2010/AMD1:2013

10 POWER INPUT AND CURRENT11 HEATING13.2 LEAKAGE CURRENT AT OPERATING TEMPERATURE13.3 ELECTRIC STRENGTH AT OPERATING TEMPERATURE15.2 MOISTURE RESISTANCE - SPILLAGE15.3 MOISTURE RESISTANCE - HUMIDITY16.2 LEAKAGE CURRENT AFTER HUMIDITY TREATMENT16.3 ELECTRIC STRENGTH AFTER HUMIDITY TREATMENT17 OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUIS19.10 ABNORMAL OPERATION - SERIES MOTOR19.11.1 ABNORMAL OPERATION - ELECTRONIC CIRCUITS - LOW POWER CIRCUIT19.11.2 ABNORMAL OPERATION - ELECTRONIC CIRCUITS - FAULT CONDITIONS19.11.3 ABNORMAL OPERATION - PROTECTIVE ELECTRONIC CIRCUIT19.11.4.1 ABNORMAL OPERATION – IMMUNITY TO ELECTROSTATIC DISCHARGES19.11.4.3 ABNORMAL OPERATION – IMMUNITY TO FAST TRANSIENTS19.11.4.4 ABNORMAL OPERATION – IMMUNITY TO VOLTAGE SURGES19.11.4.5 ABNORMAL OPERATION – IMMUNITY TO INJECTED CURRENTS19.11.4.6 ABNORMAL OPERATION – IMMUNITY TO VOLTAGE DIPS AND INTERRUPTIONS19.11.4.8 ABNORMAL OPERATION - UNDER VOLTAGE19.12 ABNORMAL OPERATION - MINIATURE FUSE-LINK19.14 ABNORMAL OPERATION - CONTACTOR OR RELAY SHORT CIRCUIT19.7 ABNORMAL OPERATION - STALLED CONDITIONS19.8 ABNORMAL OPERATION – DISCONNECTED PHASE19.9 ABNORMAL OPERATION - RUNNING OVERLOAD20.1 STABILITY AND MECHANICAL HAZARDS - STABILITY20.2 STABILITY AND MECHANICAL HAZARDS - MECHANICAL FORCE21.1 MECHANICAL STRENGTH - SPRING HAMMER TEST21.2 MECHANICAL STRENGTH - SCRATCH TEST22.1 CONSTRUCTION - FIRST IP NUMERAL TEST22.11 CONSTRUCTION - RELIABILITY OF NON-DETACHABLE PARTS FIXING22.12 CONSTRUCTION - HANDLES, KNOBS, GRIPS, LEVERS - AXIAL PULL22.5 CONSTRUCTION - CAPACITOR DISCHARGE TEST22.6 CONSTRUCTION - LEAKAGE OF LIQUID23.3 INTERNAL WIRING - MOVABLE PARTS WIRE FLEXING23.5 INTERNAL WIRING - ELECTRIC STRENGTH TEST24.1.4 COMPONENT - AUTOMATIC CONTROLS TEST24.5 COMPONENT - VOLTAGE ACROSS CAPACITOR25.15, 25.16 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - PUSH, PULL & TORQUE TESTS FOR FLEXIBLE CORD25.2 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - ELECTRIC STRENGTH TEST FOR MULTIPLE SUPPLY25.21 SUPPLY CONNECTION AND EXTERNAL FLEXING CORDS - CONNECTION SPACE FOR PORTABLE APPLIANCES 26.10 TERMINALS FOR EXTERNAL CONDUCTORS – CONNECTION TERMINALS FOR FLAT TWIN TINSEL CORDS26.3 TERMINALS FOR EXTERNAL CONDUCTORS - TERMINAL SECUREMENT TEST26.5 TERMINALS FOR EXTERNAL CONDUCTORS – STRANDED CONDUCTOR27.5 PROVISION FOR EARTHING - VOLTAGE DROP28.1 SCREWS AND CONNECTIONS - SCREW TORQUE TEST29 CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION29.1, 29.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - STEADY FORCE ON INTERNAL BARE CONDUCTORS 29.2, ANNEX N CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - PROOF TRACKING TEST29.3.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION – ELECTRIC STRENGTH TEST ON INSULATION LAYERS30.1 RESISTANCE TO HEAT AND FIRE - BALL PRESSURE TEST30.2 RESISTANCE TO HEAT AND FIRE - GLOW-WIRE TEST30.2.3.2, ANNEX E RESISTANCE TO HEAT AND FIRE - NEEDLE FLAME TEST31 RESISTANCE TO RUSTING7.14 MARKING AND INSTRUCTIONS - MARKING DURABILITY8.1.1 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE B OF IEC610328.1.2 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE 13 OF IEC610328.1.3 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE 41 OF IEC610328.1.4 PROTECTION AGAINST ACCESS TO LIVE PARTS - ACCESSIBLE PART - SELVANNEX C AGING TEST ON MOTORSANNEX D THERMAL MOTOR PROTECTORSANNEX G SAFETY ISOLATING TRANSFORMERSANNEX I MOTORS HAVING BASIC INSULATION THAT IS INADEQUATE FOR THE RATED VOLTAGE OF THE APPLIANCEANNEX K OVERVOLTAGE CATEGORIES
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-1:2010/AMD2:2016

10 POWER INPUT AND CURRENT11 HEATING13.2 LEAKAGE CURRENT AT OPERATING TEMPERATURE13.3 ELECTRIC STRENGTH AT OPERATING TEMPERATURE15.2 MOISTURE RESISTANCE - SPILLAGE15.3 MOISTURE RESISTANCE - HUMIDITY16.2 LEAKAGE CURRENT AFTER HUMIDITY TREATMENT16.3 ELECTRIC STRENGTH AFTER HUMIDITY TREATMENT17 OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUIS19.10 ABNORMAL OPERATION - SERIES MOTOR19.11.1 ABNORMAL OPERATION - ELECTRONIC CIRCUITS - LOW POWER CIRCUIT19.11.2 ABNORMAL OPERATION - ELECTRONIC CIRCUITS - FAULT CONDITIONS19.11.3 ABNORMAL OPERATION - PROTECTIVE ELECTRONIC CIRCUIT19.11.4.1 ABNORMAL OPERATION – IMMUNITY TO ELECTROSTATIC DISCHARGES19.11.4.3 ABNORMAL OPERATION – IMMUNITY TO FAST TRANSIENTS19.11.4.4 ABNORMAL OPERATION – IMMUNITY TO VOLTAGE SURGES19.11.4.5 ABNORMAL OPERATION – IMMUNITY TO INJECTED CURRENTS19.11.4.6 ABNORMAL OPERATION – IMMUNITY TO VOLTAGE DIPS AND INTERRUPTIONS19.11.4.8 ABNORMAL OPERATION - UNDER VOLTAGE19.12 ABNORMAL OPERATION - MINIATURE FUSE-LINK19.14 ABNORMAL OPERATION - CONTACTOR OR RELAY SHORT CIRCUIT19.7 ABNORMAL OPERATION - STALLED CONDITIONS19.8 ABNORMAL OPERATION – DISCONNECTED PHASE19.9 ABNORMAL OPERATION - RUNNING OVERLOAD20.1 STABILITY AND MECHANICAL HAZARDS - STABILITY20.2 STABILITY AND MECHANICAL HAZARDS - MECHANICAL FORCE21.1 MECHANICAL STRENGTH - SPRING HAMMER TEST21.2 MECHANICAL STRENGTH - SCRATCH TEST22.1 CONSTRUCTION - FIRST IP NUMERAL TEST22.11 CONSTRUCTION - RELIABILITY OF NON-DETACHABLE PARTS FIXING22.12 CONSTRUCTION - HANDLES, KNOBS, GRIPS, LEVERS - AXIAL PULL22.5 CONSTRUCTION - CAPACITOR DISCHARGE TEST22.6 CONSTRUCTION - LEAKAGE OF LIQUID23.3 INTERNAL WIRING - MOVABLE PARTS WIRE FLEXING23.5 INTERNAL WIRING - ELECTRIC STRENGTH TEST24.1.4 COMPONENT - AUTOMATIC CONTROLS TEST24.5 COMPONENT - VOLTAGE ACROSS CAPACITOR25.15, 25.16 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - PUSH, PULL & TORQUE TESTS FOR FLEXIBLE CORD25.2 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS - ELECTRIC STRENGTH TEST FOR MULTIPLE SUPPLY25.21 SUPPLY CONNECTION AND EXTERNAL FLEXING CORDS - CONNECTION SPACE FOR PORTABLE APPLIANCES 26.10 TERMINALS FOR EXTERNAL CONDUCTORS – CONNECTION TERMINALS FOR FLAT TWIN TINSEL CORDS26.3 TERMINALS FOR EXTERNAL CONDUCTORS - TERMINAL SECUREMENT TEST26.5 TERMINALS FOR EXTERNAL CONDUCTORS – STRANDED CONDUCTOR27.5 PROVISION FOR EARTHING - VOLTAGE DROP28.1 SCREWS AND CONNECTIONS - SCREW TORQUE TEST29 CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION29.1, 29.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - STEADY FORCE ON INTERNAL BARE CONDUCTORS 29.2, ANNEX N CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - PROOF TRACKING TEST29.3.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION – ELECTRIC STRENGTH TEST ON INSULATION LAYERS30.1 RESISTANCE TO HEAT AND FIRE - BALL PRESSURE TEST30.2 RESISTANCE TO HEAT AND FIRE - GLOW-WIRE TEST30.2.3.2, ANNEX E RESISTANCE TO HEAT AND FIRE - NEEDLE FLAME TEST31 RESISTANCE TO RUSTING7.14 MARKING AND INSTRUCTIONS - MARKING DURABILITY8.1.1 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE B OF IEC610328.1.2 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE 13 OF IEC610328.1.3 PROTECTION AGAINST ACCESS TO LIVE PARTS - TEST PROBE 41 OF IEC610328.1.4 PROTECTION AGAINST ACCESS TO LIVE PARTS - ACCESSIBLE PART - SELVANNEX C AGING TEST ON MOTORSANNEX D THERMAL MOTOR PROTECTORSANNEX G SAFETY ISOLATING TRANSFORMERSANNEX I MOTORS HAVING BASIC INSULATION THAT IS INADEQUATE FOR THE RATED VOLTAGE OF THE APPLIANCEANNEX K OVERVOLTAGE CATEGORIES
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-2-6:2014

21.102 MECHANICAL STRENGTH - HOB SURFACES30 RESISTANCE TO HEAT AND FIRE10 POWER INPUT AND CURRENT11 HEATING13 LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE15 MOISTURE RESISTANCE16 LEAKAGE CURRENT AND ELECTRIC STRENGTH17 OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS19 ABNORMAL OPERATION20 STABILITY AND MECHANICAL HAZARDS21 MECHANICAL STRENGTH22 CONSTRUCTION23 INTERNAL WIRING24 COMPONENTS25 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS26 TERMINALS FOR EXTERNAL CONDUCTORS27 PROVISION FOR EARTHING28 SCREWS AND CONNECTIONS29 CLEARANCE, CREEPAGE DISTANCES AND SOLID INSULATION31 RESISTANCE TO RUSTING32 RADIATION, TOXICITY AND SIMILAR HAZARDS5 GENERAL CONDITIONS FOR THE TESTS6 CLASSIFICATION7 MARKING AND INSTRUCTIONS8 PROTECTION AGAINST ACCESS TO LIVE PARTS
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-2-6:2014/AMD1:2018

21.102 MECHANICAL STRENGTH - HOB SURFACES30 RESISTANCE TO HEAT AND FIRE10 POWER INPUT AND CURRENT11 HEATING13 LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE15 MOISTURE RESISTANCE16 LEAKAGE CURRENT AND ELECTRIC STRENGTH17 OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS19 ABNORMAL OPERATION20 STABILITY AND MECHANICAL HAZARDS21 MECHANICAL STRENGTH22 CONSTRUCTION23 INTERNAL WIRING24 COMPONENTS25 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS26 TERMINALS FOR EXTERNAL CONDUCTORS27 PROVISION FOR EARTHING28 SCREWS AND CONNECTIONS29 CLEARANCE, CREEPAGE DISTANCES AND SOLID INSULATION31 RESISTANCE TO RUSTING32 RADIATION, TOXICITY AND SIMILAR HAZARDS5 GENERAL CONDITIONS FOR THE TESTS6 CLASSIFICATION7 MARKING AND INSTRUCTIONS8 PROTECTION AGAINST ACCESS TO LIVE PARTS
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-2-31:2012

20.101 RISK OF ENTRAPMENT22.103 CLEARANCE FOR SCREWS IN CLASS II CONSTRUCTIONS11.2 HEATING – SIX HOBS ELEMENTS11.2 HEATING – FOUR HOBS ELEMENTS19.101 ABNORMAL OPERATIONS – WITHOUT VESSELS, WITH TWO REAR HOBS ENERGIZED22.8 CONSTRUCTION – GRASP OF INTERNAL WIRING
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-2-31:2012/AMD1:2016

20.101 RISK OF ENTRAPMENT22.103 CLEARANCE FOR SCREWS IN CLASS II CONSTRUCTIONS11.2 HEATING – SIX HOBS ELEMENTS11.2 HEATING – FOUR HOBS ELEMENTS19.101 ABNORMAL OPERATIONS – WITHOUT VESSELS, WITH TWO REAR HOBS ENERGIZED22.8 CONSTRUCTION – GRASP OF INTERNAL WIRING
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-2-31:2012/AMD2:2018

20.101 RISK OF ENTRAPMENT22.103 CLEARANCE FOR SCREWS IN CLASS II CONSTRUCTIONS11.2 HEATING – SIX HOBS ELEMENTS11.2 HEATING – FOUR HOBS ELEMENTS19.101 ABNORMAL OPERATIONS – WITHOUT VESSELS, WITH TWO REAR HOBS ENERGIZED22.8 CONSTRUCTION – GRASP OF INTERNAL WIRING
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-2-31:2002

11.2 HEATING – SIX HOBS ELEMENTS11.2 HEATING – FOUR HOBS ELEMENTS19.101 ABNORMAL OPERATIONS – WITHOUT VESSELS, WITH TWO REAR HOBS ENERGIZED22.8 CONSTRUCTION – GRASP OF INTERNAL WIRING
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-2-31:2002/AMD1:2006

11.2 HEATING – SIX HOBS ELEMENTS11.2 HEATING – FOUR HOBS ELEMENTS19.101 ABNORMAL OPERATIONS – WITHOUT VESSELS, WITH TWO REAR HOBS ENERGIZED22.8 CONSTRUCTION – GRASP OF INTERNAL WIRING
 2019-11-30

UL Solutions (Demko)

HOUS

IEC 60335-2-31:2002/AMD2:2008

11.2 HEATING – SIX HOBS ELEMENTS11.2 HEATING – FOUR HOBS ELEMENTS19.101 ABNORMAL OPERATIONS – WITHOUT VESSELS, WITH TWO REAR HOBS ENERGIZED22.8 CONSTRUCTION – GRASP OF INTERNAL WIRING
 2019-11-30

UL Solutions (Demko)