ELECTROLUX ITALIA S.P.A
ELECTROLUX ITALIA S.P.A
| Address(es) |
|
| Website | Not available |
| Status | MEMBER |
| Acceptance date | 2016-05-16 |
Further information
Stage | Country | Name |
|---|---|---|
2 | Denmark | |
2 | Denmark |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
CONT | IEC 60730-1:2022 | 5 Information6.1.10 Protection against electric shock7.3 Adequacy of earth connection11.4 Solid Insulation12 Components13 Fault assessment on electronic circuits14.2 Protection against humid conditions14.3 Leakage current15 Electric strength and Insulation Resistance16 Heating18.2 Environmental stress of temperature19 Endurance24.2 Operation within the voltage range25 Electromagnetic compatibility (EMC) requirements – ImmunityH.13 Fault assessment on electronic circuitsH.25 Electromagnetic compatibility (EMC) requirements – Immunity | 2025-04-16 | |
CONT | IEC 60730-1:2013 | Accepted Clauses:7 Information8 Protection against electric shock9.3 Adequacy of earth connection12.2 Protection against humid conditions12.3 Leakage current13 Electric strength and Insulation Resistance14 Heating16.2 Environmental stress of temperature17 Endurance20.3 Solid Insulation24 Components27.3 Over voltage and Under voltage test Annex H.8 Protection against electric shockAnnex H.17 EnduranceAnnex H.26 Electromagnetic compatibility (EMC) requirements – Immunity (Accepted clauses: H.26.15 – Evaluation of compliance)Annex H.27 Abnormal operation | 2022-03-21 | |
CONT | IEC 60730-1:2013/AMD1:2015 | Accepted Clauses:7 Information8 Protection against electric shock9.3 Adequacy of earth connection12.2 Protection against humid conditions12.3 Leakage current13 Electric strength and Insulation Resistance14 Heating16.2 Environmental stress of temperature17 Endurance20.3 Solid Insulation24 Components27.3 Over voltage and Under voltage test Annex H.8 Protection against electric shockAnnex H.17 EnduranceAnnex H.26 Electromagnetic compatibility (EMC) requirements – Immunity (Accepted clauses: H.26.15 – Evaluation of compliance)Annex H.27 Abnormal operation | 2022-03-21 | |
CONT | IEC 60730-1:2013/AMD2:2020 | Accepted Clauses:7 Information8 Protection against electric shock9.3 Adequacy of earth connection12.2 Protection against humid conditions12.3 Leakage current13 Electric strength and Insulation Resistance14 Heating16.2 Environmental stress of temperature17 Endurance20.3 Solid Insulation24 Components27.3 Over voltage and Under voltage test Annex H.8 Protection against electric shockAnnex H.17 EnduranceAnnex H.26 Electromagnetic compatibility (EMC) requirements – Immunity (Accepted clauses: H.26.15 – Evaluation of compliance)Annex H.27 Abnormal operation | 2022-03-21 | |
CONT | IEC 60730-2-9:2015 | 7 Information8 Protection against electric shock9.3 Adequacy of earth connection12.2 Protection against humid conditions12.3 Leakage current13 Electric strength and Insulation Resistance14 Heating16.2 Environmental stress of temperature17 Endurance20.3 Solid Insulation24 Components25.2 Over voltage and Under voltage test Annex H.8 Protection against electric shockAnnex H.17 EnduranceAnnex H.26 Electromagnetic compatibility (EMC) requirements – Immunity Annex H.27 Abnormal operation | 2016-05-18 | |
CONT | IEC 60730-2-9:2015/AMD1:2018 | 7 Information8 Protection against electric shock9.3 Adequacy of earth connection12.2 Protection against humid conditions12.3 Leakage current13 Electric strength and Insulation Resistance14 Heating16.2 Environmental stress of temperature17 Endurance20.3 Solid Insulation24 Components25.2 Over voltage and Under voltage test Annex H.8 Protection against electric shockAnnex H.17 EnduranceAnnex H.26 Electromagnetic compatibility (EMC) requirements – Immunity Annex H.27 Abnormal operation | 2025-04-16 | |
CONT | IEC 60730-2-9:2015/AMD2:2020 | 7 Information8 Protection against electric shock9.3 Adequacy of earth connection12.2 Protection against humid conditions12.3 Leakage current13 Electric strength and Insulation Resistance14 Heating16.2 Environmental stress of temperature17 Endurance20.3 Solid Insulation24 Components25.2 Over voltage and Under voltage test Annex H.8 Protection against electric shockAnnex H.17 EnduranceAnnex H.26 Electromagnetic compatibility (EMC) requirements – Immunity Annex H.27 Abnormal operation | 2025-04-16 | |
EMC | CISPR 11:2024 | All Clauses except Annex F.3 | 2024-12-12 | |
EMC | CISPR 11:2015 | All clauses | 2020-10-08 | |
EMC | CISPR 11:2015/AMD1:2016 | All clauses | 2020-10-08 | |
EMC | CISPR 11:2015/AMD2:2019 | All clauses | 2020-10-08 | |
EMC | CISPR 14-1:2020 | All Clauses | 2021-09-06 | |
EMC | CISPR 14-1:2016 | All Clauses | 2022-09-13 | |
EMC | CISPR 14-1:2005 | All Clauses | 2019-06-12 | |
EMC | CISPR 14-1:2005/AMD1:2008 | All Clauses | 2019-06-12 | |
EMC | CISPR 14-1:2005/AMD2:2011 | All Clauses | 2019-06-12 | |
EMC | CISPR 14-2:2020 | All Clauses | 2021-09-06 | |
EMC | CISPR 14-2:2015 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-3-2:2018 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-3-2:2018/AMD1:2020 | All Clauses | 2021-09-06 | |
EMC | IEC 61000-3-2:2018/AMD2:2024 | All Clauses | 2024-12-12 | |
EMC | IEC 61000-3-2:2014 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-3-3:2013 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-3-3:2013/AMD1:2017 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-3-3:2013/AMD2:2021 | All Clauses | 2021-09-06 | |
EMC | IEC 61000-3-11:2017 | All clauses | 2022-09-13 | |
EMC | IEC 61000-3-11:2000 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-3-12:2011 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-3-12:2011/AMD1:2021 | All clauses | 2022-09-13 | |
EMC | IEC 61000-4-2:2008 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-3:2020 | All Clauses | 2021-09-06 | |
EMC | IEC 61000-4-3:2006 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-3:2006/AMD1:2007 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-3:2006/AMD2:2010 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-4:2012 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-5:2014 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-5:2014/AMD1:2017 | All Clauses, except 7.4, 7.5, 7.6. | 2019-06-12 | |
EMC | IEC 61000-4-6:2023 | All Clauses | 2024-12-12 | |
EMC | IEC 61000-4-6:2013 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-11:2020 | All Clauses | 2021-09-06 | |
EMC | IEC 61000-4-11:2004 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-11:2004/AMD1:2017 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-13:2002 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-13:2002/AMD1:2009 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-13:2002/AMD2:2015 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-34:2005 | All Clauses | 2019-06-12 | |
EMC | IEC 61000-4-34:2005/AMD1:2009 | All Clauses | 2019-06-12 | |
EMC | IEC 62233:2005 | EMF | 2018-02-01 | |
HOUS | IEC 60335-1:2010 | 7 Marking and instructions8 Protection against access to live parts10 Power input and current11 Heating13 Leakage current and electric strength at operatingtemperature14 Transient overvoltages15.3 Humid conditions16 Leakage current and electric strength17 Overload Protection of Transformers and AssociatedCircuits19 Abnormal Operation22 Construction23 Internal wiring24 Components26 Terminals for external conductors27 Provision for earthing28 Screws and connections29 Clearance and creepage measurement31 Resistance to rusting32 Radiation, toxicity and similar hazards | 2019-06-12 | |
HOUS | IEC 60335-1:2010/AMD1:2013 | 7 Marking and instructions8 Protection against access to live parts10 Power input and current11 Heating13 Leakage current and electric strength at operatingtemperature14 Transient overvoltages15.3 Humid conditions16 Leakage current and electric strength17 Overload Protection of Transformers and AssociatedCircuits19 Abnormal Operation22 Construction23 Internal wiring24 Components26 Terminals for external conductors27 Provision for earthing28 Screws and connections29 Clearance and creepage measurement31 Resistance to rusting32 Radiation, toxicity and similar hazards | 2019-06-12 | |
HOUS | IEC 60335-1:2010/AMD2:2016 | 7 Marking and instructions8 Protection against access to live parts10 Power input and current11 Heating13 Leakage current and electric strength at operatingtemperature14 Transient overvoltages15.3 Humid conditions16 Leakage current and electric strength17 Overload Protection of Transformers and AssociatedCircuits19 Abnormal Operation22 Construction23 Internal wiring24 Components26 Terminals for external conductors27 Provision for earthing28 Screws and connections29 Clearance and creepage measurement31 Resistance to rusting32 Radiation, toxicity and similar hazards | 2019-06-12 | |
HOUS | IEC 60335-2-6:2024 | 7 Marking and instructions8 Protection against access to live parts10 Power input and current11 Heating13 Leakage current and electric strength at operatingtemperature14 Transient overvoltages15.3 Humid conditions16 Leakage current and electric strength17 Overload Protection of Transformers and AssociatedCircuits19 Abnormal Operation22 Construction23 Internal wiring24 Components26 Terminals for external conductors27 Provision for earthing28 Screws and connections29 Clearance and creepage measurement31 Resistance to rusting32 Radiation, toxicity and similar hazards | 2025-04-16 | |
HOUS | IEC 60335-2-6:2014 | 7 Marking and instructions8 Protection against access to live parts10 Power input and current11 Heating13 Leakage current and electric strength at operatingtemperature14 Transient overvoltages15.3 Humid conditions16 Leakage current and electric strength17 Overload Protection of Transformers and AssociatedCircuits19 Abnormal Operation22 Construction23 Internal wiring24 Components26 Terminals for external conductors27 Provision for earthing28 Screws and connections29 Clearance and creepage measurement31 Resistance to rusting32 Radiation, toxicity and similar hazards | 2019-06-12 | |
HOUS | IEC 60335-2-6:2014/AMD1:2018 | 7 Marking and instructions8 Protection against access to live parts10 Power input and current11 Heating13 Leakage current and electric strength at operatingtemperature14 Transient overvoltages15.3 Humid conditions16 Leakage current and electric strength17 Overload Protection of Transformers and AssociatedCircuits19 Abnormal Operation22 Construction23 Internal wiring24 Components26 Terminals for external conductors27 Provision for earthing28 Screws and connections29 Clearance and creepage measurement31 Resistance to rusting32 Radiation, toxicity and similar hazards | 2020-02-05 | |
HOUS | IEC 60335-2-36:2017 | 7 Marking and instructions8 Protection against access to live parts10 Power input and current11 Heating13 Leakage current and electric strength at operatingtemperature14 Transient overvoltages15.3 Humid conditions16 Leakage current and electric strength17 Overload Protection of Transformers and AssociatedCircuits19 Abnormal Operation22 Construction23 Internal wiring24 Components26 Terminals for external conductors27 Provision for earthing28 Screws and connections29 Clearance and creepage measurement31 Resistance to rusting32 Radiation, toxicity and similar hazards | 2020-02-05 | |
HOUS | IEC 60335-2-102:2017 | 7 Marking and instructions8 Protection against access to live parts10 Power input and current11 Heating13 Leakage current and electric strength at operatingtemperature14 Transient overvoltages15.3 Humid conditions16 Leakage current and electric strength17 Overload Protection of Transformers and AssociatedCircuits19 Abnormal Operation22 Construction23 Internal wiring24 Components26 Terminals for external conductors27 Provision for earthing28 Screws and connections29 Clearance and creepage measurement31 Resistance to rusting32 Radiation, toxicity and similar hazards | 2019-06-12 |