C.P. Bourg SA
C.P. Bourg SA
Address(es) |
|
Website | Not available |
Status | WITHDRAWN |
Acceptance date | 2018-11-07 |
Further information
Stage | Country | Name |
---|---|---|
2 | United States of America |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
---|---|---|---|---|
ITAV | IEC 62368-1:2018 | 4.4.4.2 Annex T.6 – Impact Test4.4.4.2 Annex T.5 - Steady Force Test, 250 N5.5.2.2 - Safeguards Against Capacitor Discharge After Disconnection Of A Connector5.6.6.2(a) - Resistance Of The Protective Bonding System5.7 - Prospective Touch Voltage And Touch Current Measurement5.4.1.4, ANNEX B.26 - Normal Operating Conditions Temperature TestB.2.5 - Input Test: Single PhaseB.3 - Simulated Abnormal Operating ConditionsB.4 - Simulated Single Fault ConditionsAnnex G.5.4.6.3 - Alternative Locked-Rotor Overload Test for D.C. MotorsAnnex Q.1 - Limited Power Source | 2023-03-10 | |
ITAV | IEC 62368-1:2014 | 4.4.4.2 Annex T.5 - Steady Force Test, 250 N4.4.4.2 Annex T.6 – Impact Test5.4.9 - Electric Strength Test5.5.2.2 - Safeguards Against Capacitor Discharge After Disconnection Of A Connector5.6.6.2(a) - Resistance Of The Protective Bonding System5.7 - Prospective Touch Voltage And Touch Current Measurement5.4.1.4, ANNEX B.26 - Normal Operating Conditions Temperature TestB.2.5 - Input Test: Single PhaseB.3 - Simulated Abnormal Operating ConditionsB.4 - Simulated Single Fault ConditionsAnnex G.5.4.6.3 - Alternative Locked-Rotor Overload Test for D.C. MotorsAnnex Q.1 - Limited Power Source | 2020-09-17 | |
OFF | IEC 60950-1:2005 | 1.6.2 - Input Test: Single Phase – This test is representative to B.2.5 - Input Test: Single Phase Test of IEC 62368-1.2.1.1.7 - Capacitance Discharge Test – This test is representative to 5.5.2.2 - Safeguards Against Capacitor Discharge After Disconnection Of A Connector Test of IEC 62368-1.2.5 - Limited power source measurements – This test is representative to Annex Q.1 - Limited Power Source Test of IEC 62368-1.2.6.3.4, 2.6.1 - Protective bonding test II – This test is representative to 5.6.6.2(a) - Resistance Of The Protective Bonding System Test of IEC 62368-1.4.5.1, 1.4.12, 1.4.13 Heating Test – This test is representative to 6.3 - Normal Operating Conditions Temperature Test of IEC 62368-1.5.1, Annex D - Touch Current Test (Single-Phase; TN/TT System) – This test is representative to 5.7 - Prospective Touch Voltage And Touch Current Measurement Test of IEC 62368-1.5.2.2 - Electric Strength Test – This test is representative to 5.4.9 - Electric Strength Test of IEC 62368-1.5.3.1, 5.3.4, 5.3.7 – Component Failure Test – This test is representative to B.4 - Simulated Single Fault Conditions Test of IEC 62368-1.5.3.1 5.3.9 - Abnormal Operation Tests – This test is representative to B.3 - Simulated Abnormal Operating Conditions Test of IEC 62368-1.4.2.1 - 4.2.4 - Steady Force Test – This test is representative to 4.4.4.2, Annex T.5 – Steady Force Test, 250 N test of IEC 62368-1.4.2.5, 4.2.1 - Impact Test – This test is representative to 4.4.4.4, ANNEX T.6 – Impact Test of IEC 62368-1.Annex B.7 - Locked Rotor Overload Test For Dc Motors In Secondary Circuits – This test is representative to Annex G.5.4.6.3 - Alternative Locked-Rotor Overload Test for D.C. Motors Test of IEC 62368-1. | 2020-09-17 | |
OFF | IEC 60950-1:2005/AMD1:2009 | 1.6.2 - Input Test: Single Phase – This test is representative to B.2.5 - Input Test: Single Phase Test of IEC 62368-1.2.1.1.7 - Capacitance Discharge Test – This test is representative to 5.5.2.2 - Safeguards Against Capacitor Discharge After Disconnection Of A Connector Test of IEC 62368-1.2.5 - Limited power source measurements – This test is representative to Annex Q.1 - Limited Power Source Test of IEC 62368-1.2.6.3.4, 2.6.1 - Protective bonding test II – This test is representative to 5.6.6.2(a) - Resistance Of The Protective Bonding System Test of IEC 62368-1.4.5.1, 1.4.12, 1.4.13 Heating Test – This test is representative to 6.3 - Normal Operating Conditions Temperature Test of IEC 62368-1.5.1, Annex D - Touch Current Test (Single-Phase; TN/TT System) – This test is representative to 5.7 - Prospective Touch Voltage And Touch Current Measurement Test of IEC 62368-1.5.2.2 - Electric Strength Test – This test is representative to 5.4.9 - Electric Strength Test of IEC 62368-1.5.3.1, 5.3.4, 5.3.7 – Component Failure Test – This test is representative to B.4 - Simulated Single Fault Conditions Test of IEC 62368-1.5.3.1 5.3.9 - Abnormal Operation Tests – This test is representative to B.3 - Simulated Abnormal Operating Conditions Test of IEC 62368-1.4.2.1 - 4.2.4 - Steady Force Test – This test is representative to 4.4.4.2, Annex T.5 – Steady Force Test, 250 N test of IEC 62368-1.4.2.5, 4.2.1 - Impact Test – This test is representative to 4.4.4.4, ANNEX T.6 – Impact Test of IEC 62368-1.Annex B.7 - Locked Rotor Overload Test For Dc Motors In Secondary Circuits – This test is representative to Annex G.5.4.6.3 - Alternative Locked-Rotor Overload Test for D.C. Motors Test of IEC 62368-1. | 2020-09-17 | |
OFF | IEC 60950-1:2005/AMD2:2013 | 1.6.2 - Input Test: Single Phase – This test is representative to B.2.5 - Input Test: Single Phase Test of IEC 62368-1.2.1.1.7 - Capacitance Discharge Test – This test is representative to 5.5.2.2 - Safeguards Against Capacitor Discharge After Disconnection Of A Connector Test of IEC 62368-1.2.5 - Limited power source measurements – This test is representative to Annex Q.1 - Limited Power Source Test of IEC 62368-1.2.6.3.4, 2.6.1 - Protective bonding test II – This test is representative to 5.6.6.2(a) - Resistance Of The Protective Bonding System Test of IEC 62368-1.4.5.1, 1.4.12, 1.4.13 Heating Test – This test is representative to 6.3 - Normal Operating Conditions Temperature Test of IEC 62368-1.5.1, Annex D - Touch Current Test (Single-Phase; TN/TT System) – This test is representative to 5.7 - Prospective Touch Voltage And Touch Current Measurement Test of IEC 62368-1.5.2.2 - Electric Strength Test – This test is representative to 5.4.9 - Electric Strength Test of IEC 62368-1.5.3.1, 5.3.4, 5.3.7 – Component Failure Test – This test is representative to B.4 - Simulated Single Fault Conditions Test of IEC 62368-1.5.3.1 5.3.9 - Abnormal Operation Tests – This test is representative to B.3 - Simulated Abnormal Operating Conditions Test of IEC 62368-1.4.2.1 - 4.2.4 - Steady Force Test – This test is representative to 4.4.4.2, Annex T.5 – Steady Force Test, 250 N test of IEC 62368-1.4.2.5, 4.2.1 - Impact Test – This test is representative to 4.4.4.4, ANNEX T.6 – Impact Test of IEC 62368-1.Annex B.7 - Locked Rotor Overload Test For Dc Motors In Secondary Circuits – This test is representative to Annex G.5.4.6.3 - Alternative Locked-Rotor Overload Test for D.C. Motors Test of IEC 62368-1. | 2020-09-17 |