Coway Co., Ltd. – Safety Certification Center
Coway Co., Ltd. – Safety Certification Center
Address(es) |
|
Website | Not available |
Status | MEMBER |
Acceptance date | 2019-05-08 |
Further information
Stage | Country | Name |
---|---|---|
2 | Korea, Republic of |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
---|---|---|---|---|
EMC | CISPR 14-1:2005 | All clauses but:4.1.2.2 Radiated disturbances measurement in the frequency range 30 MHz to 1 000 MHz5.2.2.2 handheld appliance which are normally operated without an earth connection9 Methods of measurement of radiated emission (30 MHz to 1 000 MHz) | 2020-07-16 | |
EMC | CISPR 14-1:2005/AMD1:2008 | All clauses but:4.1.2.2 Radiated disturbances measurement in the frequency range 30 MHz to 1 000 MHz5.2.2.2 handheld appliance which are normally operated without an earth connection9 Methods of measurement of radiated emission (30 MHz to 1 000 MHz) | 2020-07-16 | |
EMC | CISPR 14-1:2005/AMD2:2011 | All clauses but:4.1.2.2 Radiated disturbances measurement in the frequency range 30 MHz to 1 000 MHz5.2.2.2 handheld appliance which are normally operated without an earth connection9 Methods of measurement of radiated emission (30 MHz to 1 000 MHz) | 2020-07-16 | |
EMC | CISPR 14-1:2000 | All clauses but:4.1.2.2 Radiated disturbances measurement in the frequency range 30 MHz to 1 000 MHz5.2.2.2 handheld appliance which are normally operated without an earth connection9 Methods of measurement of radiated emission (30 MHz to 1 000 MHz) | 2020-06-16 | |
EMC | CISPR 14-1:2000/AMD1:2001 | All clauses except for;4.1.2.2 Radiated disturbances measurement in the frequency range 30 MHz to 1 000 MHz5.2.2.2 handheld appliance which are normally operated without an earth connection9 Methods of measurement of radiated emission (30 MHz to 1 000 MHz) | 2020-06-16 | |
EMC | CISPR 14-1:2000/AMD2:2002 | All clauses except for;4.1.2.2 Radiated disturbances measurement in the frequency range 30 MHz to 1 000 MHz5.2.2.2 handheld appliance which are normally operated without an earth connection9 Methods of measurement of radiated emission (30 MHz to 1 000 MHz) | 2020-06-16 | |
EMC | CISPR 14-2:2015 | All clauses except for ;5.5 Radio frequency electromagnetic fields, 80 MHz to 1 000 MHz | 2020-07-16 | |
EMC | CISPR 14-2:1997 | All clauses except for ; 5.5 Radio frequency electromagnetic fields, 80 MHz to 1 000 MHz | 2020-07-16 | |
EMC | CISPR 14-2:1997/AMD1:2001 | All clauses except for ;5.5 Radio frequency electromagnetic fields, 80 MHz to 1 000 MHz | 2020-07-16 | |
EMC | IEC 61000-3-2:2014 | All clauses | 2020-07-16 | |
EMC | IEC 61000-3-2:2005 | All clauses | 2020-07-16 | |
EMC | IEC 61000-3-2:2005/AMD1:2008 | All clauses | 2020-07-16 | |
EMC | IEC 61000-3-2:2005/AMD2:2009 | All clauses | 2020-07-16 | |
EMC | IEC 61000-3-2:2000 | All clauses | 2020-07-16 | |
EMC | IEC 61000-3-2:2000/AMD1:2001 | All clauses | 2020-07-16 | |
EMC | IEC 61000-3-3:2013 | All clauses | 2020-07-16 | |
EMC | IEC 61000-3-3:1994 | All clauses | 2020-07-16 | |
EMC | IEC 61000-3-3:1994/AMD1:2001 | All clauses | 2020-07-16 | |
HOUS | IEC 60335-1:2010 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-1:2010/AMD1:2013 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 3~7 test19.11.4.1~19.11.4.7 EMS test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-1:2010/AMD2:2016 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 3~7 test19.11.4.1~19.11.4.7 EMS test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-1:2001 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-1:2001/AMD1:2004 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 3~7 test19.11.4.1~19.11.4.7 EMS test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-1:2001/AMD2:2006 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 3~7 test19.11.4.1~19.11.4.7 EMS test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-1:1991 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-1:1991/AMD1:1994 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 3~7 test19.11.4.1~19.11.4.7 EMS test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-1:1991/AMD2:1999 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 3~7 test19.11.4.1~19.11.4.7 EMS test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-14:2006 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-14:2006/AMD1:2008 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-14:1994 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-14:1994/AMD1:1998 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-14:1994/AMD2:1999 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:2002 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:2002/AMD1:2005 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:2002/AMD2:2008 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:1995 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:1995/AMD1:1999 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:1995/AMD2:2000 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:1986 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:1986/AMD1:1988 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:1986/AMD2:1990 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-15:1986/AMD3:1992 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:2012 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Rated pressure of immersion heater units24.1.1~24.1.6 Component test25.14 Supply cord flexing test 27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:2002 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:2002/AMD1:2004 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Rated pressure of immersion heater units24.1.1~24.1.6 Component test25.14 Supply cord flexing test 27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:2002/AMD2:2008 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Rated pressure of immersion heater units24.1.1~24.1.6 Component test25.14 Supply cord flexing test 27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:1997 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:1997/AMD1:1999 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Rated pressure of immersion heater units24.1.1~24.1.6 Component test25.14 Supply cord flexing test 27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:1989 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:1989/AMD1:1990 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Rated pressure of immersion heater units24.1.1~24.1.6 Component test25.14 Supply cord flexing test 27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:1989/AMD2:1990 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Rated pressure of immersion heater units24.1.1~24.1.6 Component test25.14 Supply cord flexing test 27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-21:1989/AMD3:1992 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Rated pressure of immersion heater units24.1.1~24.1.6 Component test25.14 Supply cord flexing test 27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-24:2010 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-24:2010/AMD1:2012 | All clauses except for;8.1.4 Discharge energy measurement10.101 Defrosting system power input14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test15.102~15.103 Overflow test19.105 Battery test with reversed polarity20.102~20.104 Sliding drawer test21.2 Solid insulation strength test21.101~21.102 Dropping and vibration test22.7 Pressure test for compression-type appliances22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Torque test for Lampholders22.102 Electric strength test for insulated wire heaters22.107.1~22.107.2 Refrigerant leakage test22.111~22.114 free space test22.115 Mechanical strength test for fixed appliance24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-24:2002 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-24:2002/AMD1:2005 | All clauses except for;8.1.4 Discharge energy measurement10.101 Defrosting system power input14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test15.102~15.103 Overflow test19.105 Battery test with reversed polarity20.102~20.104 Sliding drawer test21.2 Solid insulation strength test21.101~21.102 Dropping and vibration test22.7 Pressure test for compression-type appliances22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Torque test for Lampholders22.102 Electric strength test for insulated wire heaters22.107.1~22.107.2 Refrigerant leakage test22.111~22.114 free space test22.115 Mechanical strength test for fixed appliance24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-24:2002/AMD2:2007 | All clauses except for;8.1.4 Discharge energy measurement10.101 Defrosting system power input14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test15.102~15.103 Overflow test19.105 Battery test with reversed polarity20.102~20.104 Sliding drawer test21.2 Solid insulation strength test21.101~21.102 Dropping and vibration test22.7 Pressure test for compression-type appliances22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Torque test for Lampholders22.102 Electric strength test for insulated wire heaters22.107.1~22.107.2 Refrigerant leakage test22.111~22.114 free space test22.115 Mechanical strength test for fixed appliance24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-24:2000 | All clauses except for;8.1.4 Discharge energy measurement10.101 Defrosting system power input14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test15.102~15.103 Overflow test19.105 Battery test with reversed polarity20.102~20.104 Sliding drawer test21.2 Solid insulation strength test21.101~21.102 Dropping and vibration test22.7 Pressure test for compression-type appliances22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Torque test for Lampholders22.102 Electric strength test for insulated wire heaters22.107.1~22.107.2 Refrigerant leakage test22.111~22.114 free space test22.115 Mechanical strength test for fixed appliance24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-24:1992 | All clauses except for;8.1.4 Discharge energy measurement10.101 Defrosting system power input14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test15.102~15.103 Overflow test19.105 Battery test with reversed polarity20.102~20.104 Sliding drawer test21.2 Solid insulation strength test21.101~21.102 Dropping and vibration test22.7 Pressure test for compression-type appliances22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation22.101 Torque test for Lampholders22.102 Electric strength test for insulated wire heaters22.107.1~22.107.2 Refrigerant leakage test22.111~22.114 free space test22.115 Mechanical strength test for fixed appliance24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2019-05-08 | |
HOUS | IEC 60335-2-35:2012 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-40:2013 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-40:2002 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-40:2002/AMD1:2005 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-40:2002/AMD2:2005 | All clauses except for;8.1.4 discharge energy measurement14 Transient overvoltage test15.1.1 IPX 5~7 test19.11.4.2 radiated fields test21.2 Solid insulation strength test22.16 Automatic cord reels test22.18 Corrosion-resistant test22.32 Rubber ageing resistant test22.46 Software evaluation24.1.1~24.1.6 Component test25.14 Supply cord flexing test27.4 Electroplated coating thickness test29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-65:2002 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-65:2002/AMD1:2008 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-65:2002/AMD2:2015 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-65:1993 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-65:1993/AMD1:2000 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-84:2002 | All clauses except for; 8.1.4 discharge energy measurement 14 Transient overvoltage test 15.1.1 IPX 3~7 test 19.11.4.1~19.11.4.7 EMS test 21.2 Solid insulation strength test 22.16 Automatic cord reels test 22.18 Corrosion-resistant test 22.32 Rubber ageing resistant test 22.46 Software evaluation 24.1.1~24.1.6 Component test 25.14 Supply cord flexing test 27.4 Electroplated coating thickness test 29.3.3 Insulation dry heat test | 2020-07-16 | |
HOUS | IEC 60335-2-84:2002/AMD1:2008 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test31 Resistance to rusting | 2020-07-16 | |
HOUS | IEC 60335-2-84:2002/AMD2:2013 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test31 Resistance to rusting | 2020-07-16 | |
HOUS | IEC 60335-2-84:1998 | All clauses except for;8.1.4 Discharge Energy14 Transient overvoltage19.3 evaporator 21.101~21.102 Dropped vibration22.112 ISO 514922.115 ~ 118 flammable refrigerants24.1.1 ~ 24.1.6 Component25.14 Supply cord27.4 Electroplate coating thickness29.3.3 Insulation dry heat test31 Resistance to rusting | 2020-07-16 |