Barco N.V.
Barco N.V.
| Address(es) |
|
| Website | Not available |
| Status | MEMBER |
| Acceptance date | 2005-10-11 |
Further information
Stage | Country | Name |
|---|---|---|
3 | Denmark |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
|---|---|---|---|---|
EMC | CISPR 11:2015 | All clauses except:6.3.1.3 (radiated disturbances 150 kHz – 30 MHz) | 2024-03-04 | |
EMC | CISPR 11:2015/AMD1:2016 | All clauses except:6.3.1.3 (radiated disturbances 150 kHz – 30 MHz) | 2024-03-04 | |
EMC | CISPR 11:2015/AMD2:2019 | All clauses except:6.3.1.3 (radiated disturbances 150 kHz – 30 MHz) | 2024-03-04 | |
EMC | CISPR 32:2015 | All tests except tests of TV/FM broadcast receivers, devices with an RF modulator output port and outdoor unit of home satellite receiving systems | 2024-03-04 | |
EMC | CISPR 32:2015/AMD1:2019 | All tests except tests of TV/FM broadcast receivers, devices with an RF modulator output port and outdoor unit of home satellite receiving systems | 2024-03-04 | |
EMC | CISPR 35:2016 | All clauses except:4.2.3 (immunity to power frequency magnetic field)4.2.5 (immunity to surges on analogue/digital data ports only)4.2.7 (immunity to broadband impulsive conducted disturbances) | 2024-03-04 | |
EMC | IEC 60601-1-2:2014 | All clauses except:7.1.1 (radiated disturbances 150 kHz – 30 MHz)7.1.1 (conducted emission by voltage probe)7.1.7 (all emission tests under CISPR 14-1)8 (immunity to surges on SIP / SOPS intended to be connected to outdoor symmetrical communication lines only)8 (immunity test to power frequency magnetic fields only)8 (immunity to proximity magnetic fields)8 (electrical transient conduction along supply lines according to ISO 7637-2:2011 only) | 2024-03-04 | |
EMC | IEC 60601-1-2:2014/AMD1:2020 | All clauses except:7.1.1 (radiated disturbances 150 kHz – 30 MHz)7.1.1 (conducted emission by voltage probe)7.1.7 (all emission tests under CISPR 14-1)8 (immunity to surges on SIP / SOPS intended to be connected to outdoor symmetrical communication lines only)8 (immunity test to power frequency magnetic fields only)8 (immunity to proximity magnetic fields)8 (electrical transient conduction along supply lines according to ISO 7637-2:2011 only) | 2024-03-04 | |
EMC | IEC 61000-3-2:2018 | All clauses | 2024-03-04 | |
EMC | IEC 61000-3-2:2018/AMD1:2020 | All clauses | 2024-03-04 | |
EMC | IEC 61000-3-2:2005 | All clauses | 2024-03-04 | |
EMC | IEC 61000-3-2:2005/AMD1:2008 | All clauses | 2024-03-04 | |
EMC | IEC 61000-3-2:2005/AMD2:2009 | All clauses | 2024-03-04 | |
EMC | IEC 61000-3-3:2013 | All clauses | 2024-03-04 | |
EMC | IEC 61000-3-3:2013/AMD1:2017 | All clauses | 2024-03-04 | |
EMC | IEC 61000-3-3:2013/AMD2:2021 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-2:2008 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-3:2006 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-3:2006/AMD1:2007 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-3:2006/AMD2:2010 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-4:2012 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-5:2014 | All clauses except 7.4, 7.5, 7.6, Annex A | 2024-03-04 | |
EMC | IEC 61000-4-5:2014/AMD1:2017 | All clauses except 7.4, 7.5, 7.6, Annex A | 2024-03-04 | |
EMC | IEC 61000-4-5:2005 | All clauses except 7.4, 7.5, 7.6, Annex A | 2024-03-04 | |
EMC | IEC 61000-4-6:2013 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-6:2008 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-11:2004 | All clauses | 2024-03-04 | |
EMC | IEC 61000-4-11:2004/AMD1:2017 | All clauses | 2024-03-04 | |
ITAV | IEC 62368-1:2018 | 6.2.2.2, 6.2.2.3 Power measurementsB.2.5 Input testF.3.10 TEST FOR THE PERMANENCE OF MARKINGS5.3.2.2 Contact requirements5.5.2.2 Safeguards against capacitor discharge after disconnection of a connector5.4.1.8 DETERMINATION OF WORKING VOLTAGE5.4.1.8 DETERMINATION OF WORKING VOLTAGE5.4.1.8 DETERMINATION OF WORKING VOLTAGE5.2, 5.7 CLASSIFICATION OF ELECTRICAL ENERGY SOURCES Annex Q, 6.6 Circuits intended for interconnection with building wiring, LIMITED POWER SOURCE, TEST TO DETERMINE DELIVERED POWER: PS2 DETERMINATION5.6.6.2 Resistance of the protective bonding system5.4.1.3, 5.4.8 Test for hygroscopic materials. Humidity conditioning8.6.2 STATIC STABILITYT.2, T.3, T.4, T.5 Steady force tests, 10N, 30N, 100N, 250N4.4.4.4, T.6 Impact test4.4.4.3, T.7 Drop test4.4.7, T.8 Stress relief test5.4.1.4, 6.2, 9.2.5 ANNEX B.2 Maximum operating temperature for materials, components and systems5.4.1.10.3 BALL PRESSURE TEST5.2, 5.7 CLASSIFICATION OF ELECTRICAL ENERGY SOURCES, PROSPECTIVE TOUCH VOLTAGE AND TOUCH CURRENT MEASUREMENT5.4.9 Electric strength testB.3 SIMULATED ABNORMAL OPERATING CONDITIONSB.4 SIMULATED SINGLE FAULT CONDITIONS 6.2.2.2 Power measurementsG.5.4.5, G.5.4.6 RUNNING OVERLOAD TEST FOR D.C. MOTORS, LOCKED-ROTOR OVERLOAD TEST FOR D.C. MOTORS8.7 WALL, CEILING, OR OTHER STRUCTURE MOUNTING TESTS6.2.3.2 Resistive PIS Determination8.6.4 Glass Slide testT.9 Glass Impact testT.10 Glass Fragmentation testV Accessibility to Moving Parts | 2021-12-21 | |
ITAV | IEC 62368-1:2014 | 6.2.2.2, 6.2.2.3 Power measurementsB.2.5 Input testF.3.10 TEST FOR THE PERMANENCE OF MARKINGS5.3.2.2 Contact requirements5.5.2.2 Safeguards against capacitor discharge after disconnection of a connector5.4.1.8 DETERMINATION OF WORKING VOLTAGE5.4.1.8 DETERMINATION OF WORKING VOLTAGE5.4.1.8 DETERMINATION OF WORKING VOLTAGE5.2, 5.7 CLASSIFICATION OF ELECTRICAL ENERGY SOURCES Annex Q, 6.6 Circuits intended for interconnection with building wiring, LIMITED POWER SOURCE, TEST TO DETERMINE DELIVERED POWER: PS2 DETERMINATION5.6.6.2 Resistance of the protective bonding system5.4.1.3, 5.4.8 Test for hygroscopic materials. Humidity conditioning8.6.2 STATIC STABILITYT.2, T.3, T.4, T.5 Steady force tests, 10N, 30N, 100N, 250N4.4.4.4, T.6 Impact test4.4.4.3, T.7 Drop test4.4.7, T.8 Stress relief test5.4.1.4, 6.2, 9.2.5 ANNEX B.2 Maximum operating temperature for materials, components and systems5.4.1.10.3 BALL PRESSURE TEST5.2, 5.7 CLASSIFICATION OF ELECTRICAL ENERGY SOURCES, PROSPECTIVE TOUCH VOLTAGE AND TOUCH CURRENT MEASUREMENT5.4.9 Electric strength testB.3 SIMULATED ABNORMAL OPERATING CONDITIONSB.4 SIMULATED SINGLE FAULT CONDITIONS 6.2.2.2 Power measurementsG.5.4.5, G.5.4.6 RUNNING OVERLOAD TEST FOR D.C. MOTORS, LOCKED-ROTOR OVERLOAD TEST FOR D.C. MOTORS | 2020-12-14 | |
MEAS | IEC 61010-1:2010 | 4.44.4.14.4.2.34.4.2.104.4.2.125.1.35.36.26.36.7, ANNEX K6.87.46.8.28.2.18.2.28.3.19.410.1-10.410.5.110.5.210.5.311.2 | 2024-10-22 | |
MEAS | IEC 61010-1:2010/AMD1:2016 | 4.44.4.14.4.2.34.4.2.104.4.2.125.1.35.36.26.36.7, ANNEX K6.87.46.8.28.2.18.2.28.3.19.410.1-10.410.5.110.5.210.5.311.2 | 2024-10-22 | |
OFF | IEC 60950-1:2005 | 1.2.2.1 MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT AMPERE MEASUREMENT1.6.2 INPUT TEST: SINGLE-PHASE1.7.11 DURABILITY OF MARKING2.1.1.1, 2.8.2 ACCESS TO ENERGIZED PARTS2.1.1.5, 2.1.2, 1.2.8.10 ENERGY HAZARD MEASUREMENTS2.1.1.7 CAPACITANCE DISCHARGE2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT2.4.1, 2.4.2 LIMITED CURRENT CIRCUIT MEASUREMENTS2.5 LIMITED POWER SOURCE MEASUREMENTS2.6.3.4, 2.6.1 PROTECTIVE BONDING I2.9.1, 2.9.2, 5.2.2 HUMIDITY TEST4.1 STABILITY4.2.1 - 4.2.4 STEADY FORCE TESTS4.2.10 LOADING4.2.10 WALL OR CEILING MOUNTED EQUIPMENT4.2.5, 4.2.1 IMPACT 4.2.6, 4.2.1 DROP 4.2.7, 4.2.1 STRESS RELIEF TEST4.3.2 KNOB PULL/HANDLE LOADING 4.3.8 LITHIUM BATTERY REVERSE CURRENT MEASUREMENT4.5.5, 4.5 Ball Pressure4.5.1, 1.4.12, 1.4.13 HEATING TEST5.1, ANNEX D IT TOUCH CURRENT TEST (SINGLE-PHASE)5.1, ANNEX D TOUCH CURRENT (SINGLE-PHASE; TN/TT SYSTEM)5.2.2 ELECTRIC STRENGTH5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE5.3.1-5.3.9 ABNORMAL OPERATION TESTS5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOADANNEX B.7 LOCKED ROTOR OVERLOAD TEST FOR DC MOTORS IN SECONDARY CIRCUITS | 2018-12-22 | |
OFF | IEC 60950-1:2005/AMD1:2009 | 1.2.2.1 MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT AMPERE MEASUREMENT1.6.2 INPUT TEST: SINGLE-PHASE1.6.2 INPUT1.7.11 DURABILITY OF MARKING2.1.1.1, 2.8.2 ACCESS TO ENERGIZED PARTS2.1.1.5, 2.1.2, 1.2.8.10 ENERGY HAZARD MEASUREMENTS2.1.1.7 CAPACITANCE DISCHARGE 2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT2.2 SELV RELIABILITY2.4 LIMITED CURRENT CIRCUIT MEASUREMENTS2.5 LIMITED POWER SOURCE MEASUREMENTS2.6.3.4, 2.6.1 PROTECTIVE BONDING I2.9.1, 2.9.2, 5.2.2 HUMIDITY 4.1 STABILITY4.2.10 LOADING4.2.1-4.2.4 STEADY FORCE 4.2.5, 4.2.1 IMPACT 4.2.6, 4.2.1 DROP 4.2.7, 4.2.1 STRESS RELIEF4.3.2 KNOB PULL/HANDLE LOADING 4.3.8 LITHIUM BATTERY REVERSE CURRENT MEASUREMENT4.5 HEATING4.5.1, 1.4.12, 1.4.13 HEATING5.1, ANNEX D IT TOUCH CURRENT (SINGLE-PHASE)5.1, ANNEX D TOUCH CURRENT (SINGLE-PHASE; TN/TT SYSTEM)5.2.2 ELECTRIC STRENGTH5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE5.3.1-5.3.9 ABNORMAL OPERATION5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTORANNEX B.7 LOCKED ROTOR OVERLOAD TEST FOR DC MOTORS IN SECONDARY CIRCUITS | 2018-12-22 | |
OFF | IEC 60950-1:2005/AMD2:2013 | 1.2.2.1 MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT AMPERE MEASUREMENT TEST1.6.2 INPUT TEST: SINGLE-PHASE1.7.11 DURABILITY OF MARKING TEST2.1.1.1, 2.8.2 ACCESS TO ENERGIZED PARTS TEST2.1.1.5, 2.1.2, 1.2.8.10 ENERGY HAZARD MEASUREMENTS2.1.1.7 CAPACITANCE DISCHARGE TEST2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRC2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT2.2 SELV CIRCUITS2.4.1, 2.4.2 LIMITED CURRENT CIRCUIT MEASUREMENTS2.5 LIMITED POWER SOURCE MEASUREMENTS2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST I2.9.1, 2.9.2, 5.2.2 HUMIDITY TEST4.1 STABILITY TESTS4.2.1 - 4.2.4 STEADY FORCE TESTS4.2.10 LOADING TESTS – WALL AND CEILING MOUNTED EQUIPMENT4.2.5, 4.2.1 IMPACT TEST4.2.6, 4.2.1 DROP TEST4.2.7, 4.2.1 STRESS RELIEF TEST4.3.2 KNOB PULL/HANDLE LOADING TEST4.3.8 LITHIUM BATTERY REVERSE CURRENT MEASUREMENT TEST4.5.1, 1.4.12, 1.4.13 HEATING TEST5.1, ANNEX D IT TOUCH CURRENT TEST (SINGLE-PHASE)5.1, ANNEX D TOUCH CURRENT TEST (POLYPHASE; TN/TT SYSTEM)5.2.2 ELECTRIC STRENGTH TEST5.3.1 - 5.3.9 ABNORMAL OPERATION5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE TEST5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD TEST5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTORANNEX B.7 LOCKED ROTOR OVERLOAD TEST FOR DC MOTORS IN SECONDARY CIRCUITS | 2018-12-22 | |
OFF | IEC 60950-1:2001 | 1.2.2.1 MAXIMUM OUTPUT VOLTAGE- CURRENT- AND VOLT-AMPERE MEASUREMENT1.6.2/B INPUT TEST: SINGLE-PHASE1.7.13 DURABILITY OF MARKING TEST 2.1.1.1/2.8.2 ACCESS TO ENERGIZED PARTS2.1.1.5 /2.1.2 /1.2.8.9 ENERGY HAZARD MEASUREMENTS2.1.1.7 CAPACITANCE DISCHARGE TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE; HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT2.10.2 DETERMINATION OF WORKING VOLTAGE; SECONDARY OUTPUT VOLTAGE2.10.2 DETERMINATION OF WORKING VOLTAGE; VOLTAGE MEASUREMENTS2.2.2/2.2.3/2.2.4 SELV RELIABILITY2.4.1/2.4.2 LIMITED CURRENT CIRCUIT MEASUREMENTS2.5 LIMITED POWER SOURCE MEASUREMENTS2.6.3.4/ 2.6.1 EARTHING TEST I2.9.1/2.9.2/5.2.2 HUMIDITY4.1 STABILITY4.2.10 LOADING4.2.1-4.2.4 STEADY FORCE/ENCLOSURE PUSH4.2.2/4.2.3/2.10.3 INTERNAL SPACINGS PUSH4.2.5 IMPACT4.2.6/4.2.1 DROP4.2.7/4.2.1 STRESS RELIEF 4.3.2 KNOB PULL/HANDLE LOADING4.3.8 LITHIUM BATTERY REVERSE CURRENT MEASUREMENT4.5.1/1.4.12/1.4.13 HEATING4.5.5, 4.5 Ball Pressure5.1/ANNEX D TOUCH CURRENT TEST: SINGLE-PHASE/POLYPHASE; TN/TT SYSTEM5.1/ANNEX D IT TOUCH CURRENT TEST (SINGLE-PHASE)5.2.2 ELECTRIC STRENGTH.5.3.1, 5.3.4, 5.3.6 COMPONENT FAILURE TEST5.3.1/5.3.4/5.3.6 COMPONENT FAILURE5.3.6 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD5.3.6 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTORANNEX B.7 LOCKED-ROTOR OVERLOAD FOR DC MOTORS IN SECONDARY CIRCUITS | 2018-12-22 |