IEC 61543:2022

Title
Abstract

IEC 61543:2022 provides specific emission and immunity requirements, tests and performance criteria for residual current-operated protective devices (RCDs), for household and similar use, for rated voltages not exceeding 440 V.
This second edition cancels and replaces the first edition published in 1995, Amendment 1:2004 and Amendment 2:2005. This edition constitutes a technical revision.
This edition includes the following significant changes with respect to the previous edition:
some editorial modifications were introduced to comply to the ISO/IEC Directives Part 2:2021, e.g. introduction of Clause 3 – Terms and Definitions and renumbering of the whole document. In particular, the numbering of performance criteria has been changed (5.1.1, 5.1.2 become A, B, etc.);
some technical improvements:
Modification of scope and addition of Clause 6 and Clause 7 to enable the use of this document as a guideline for the preparation of EMC requirements and tests for other product standards under the scope of SC 23E;
Requirements for voltage dips and interruptions added;
Repetition rate for burst-test, defined at 5 kHz;
Surge test: Specifying impulse voltage application point and adding of voltages 2 kV, 1 kV and 0,5 kV to test T 5b;
Radiated radio-frequency electromagnetic field: Adding of frequency range 1,4 GHz to 6 GHz and specifying frequencies for the test at 1,25 IΔn;
Conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz: Specifying frequencies for the test at 1,25 IΔn;
Electrostatic discharges: Change of performance criteria from 5.1.3 to B.

Issue Date

2022-10-28

Category

EMC

Included in IECEE System

2024-09-18

Purchase webstore
Test Report Form

No information declared

Testing Equipment List

No information declared

DISCLAIMER: National differences

The National differences and Group differences, National Deviations and Special National conditions (SNC), are based solely on information provided to the Secretariat by the IECEE Member Bodies and/or NCBs and other sources. The IEC/IECEE is not responsible for, nor will it take any position related to, the accuracy or validity of the information provided. To verify the current status of this type of information, we recommend contacting the Member Body (MB) or National Certification Body (NCB) of the relevant country.

Group Differences are applicable for CENELEC member countries: Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

No information declared

Laboratory Name

City

Country

Responsible National Certification Body

Offenbach / Main

Germany

Id

Name

City

Country

13344

Offenbach / Main

Germany

No information declared