VAPEL

Address(es)
  • No.36, 2nd Baolong road, Baolong Community, Baolong Street, Longgang District, Shenzhen,GuangDong
    China

Website Not available
Status

MEMBER

Acceptance date 2017-07-17

Further information

Stage

Country

Name

1

Denmark

UL Solutions (Demko)

LEGEND: Scope Limitations
  • RA : Audio amplifiers with audio power > 0,5 Watts excluded
  • RC : Apparatus with connection(s) to a cable distribution system excluded
  • RSH : Shredders excluded
  • RT : Apparatus with connection(s) to a telecommunication network excluded
  • RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
  • ROUT : Equipment intended for installation outdoors excluded
  • RWPT : Wireless power transmitter excluded

Category

Name

Tests/Clauses

Acceptance Date

Responsible National Certification Body

ITAV

IEC 62368-1:2018

4.4.3.2, ANNEX T.4 – STEADY FORCE TEST, 100 N4.4.3.2, ANNEX T.5 – STEADY FORCE TEST, 250 N4.4.3.2, ANNEX T.3 – STEADY FORCE TEST, 30 N4.4.3.3, ANNEX T.7 – DROP TEST4.4.3.4, ANNEX T.6 – IMPACT TEST4.4.3.8, ANNEX T.8 – STRESS RELIEF TEST5.2.2.1-5.2.2.6 – CLASSIFICATION OF ELECTRICAL ENERGY SOURCES5.4.1.3 – TEST FOR HYGROSCOPIC MATERIALS5.4.1.8 – DETERMINATION OF WORKING VOLTAGE5.4.4.6.2 – SEPARABLE THIN SHEET MATERIAL5.4.8 HUMIDITY CONDITIONING 5.4.9.1 – ELECTRIC STRENGTH TEST – TYPE TESTING OF SOLID INSULATION5.5.2.2 – CAPACITOR DISCHARGE AFTER DISCONNECTION OF A CONNECTOR 5.6.6.2 – RESISTANCE OF THE PROTECTIVE BONDING SYSTEM5.7.4 – TOUCH VOLTAGE AND TOUCH CURRENT MEASUREMENT – UNEARTHED ACCESSIBLE PART5.7.5 – TOUCH CURRENT MEASUREMENT – EARTHED ACCESSIBLE CONDUCTIVE PARTS5.7.6 – PROTECTIVE CONDUCTOR CURRENT6.2.2.2, 6.2.2.3 – POWER MEASUREMENTS8.8 HANDLE STRENGTHB.2.5 – INPUT TEST: SINGLE PHASEB.1.5, B.2.6, 5.4.1.4, 6.3, 9.3 – NORMAL OPERATING CONDITIONS TEMPERATURE MEASUREMENTB.3 – SIMULATED ABNORMAL OPERATING CONDITIONSB.4 – SIMULATED SINGLE FAULT CONDITIONSANNEX F.3.10 – TEST FOR THE PERMANENCE OF MARKINGSANNEX G.5.3.3 – TRANSFORMER OVERLOADQ.1 – LIMITED POWER SOURCEANNEX T.2, 5.4.2.6, 5.4.3.2, G.15.2.6 – STEADY FORCE TEST, 10 N
 2021-11-17

UL Solutions (Demko)

ITAV

IEC 62368-1:2014

4.4.4.2,ANNEX T.3 STEADY FORCE TEST, 30N 4.4.4.2,ANNEX T.4 STEADY FORCE TEST, 100N 4.4.4.2,ANNEX T.5 STEADY FORCE TEST, 250N 4.4.4.3,ANNEX T.7 DROP TEST 4.4.4.4,ANNEX T.6 IMPACT 4.4.4.5,ANNEX T.3 STEADY FORCE TEST FOR INTERNALENCLOSURE AND BARRIER 4.4.4.7,ANNEX T.8 STRESS RELIEF TEST 5.2, 5.7 CLASSIFICATION OF ELECTRICAL ENERGYSOURCES 5.4.1.10.3 BALL PRESSURE TEST 5.4.1.8 DETERMINATION OF WORKING VOLTAGE 5.4.4.6.2 SEPARABLE THIN SHEET MATERIAL 5.4.8 HUMIDITY CONDITIONING 5.4.9 ELECTRIC STRENGTH 5.5.2.2 SAFEGUARDS AGAINST CAPACITORDISCHARGE AFTER DISCONNECTION OF ACONNECTOR 5.6.6.2 A) RESISTANCE OF THE PROTECTIVE BONDINGSYSTEM: 25 A OR LESS 5.7 PROSPECTIVE TOUCH VOLTAGE AND TOUCHCURRENT MEASUREMENT 5.7.5 PROTECTIVE CONDUCTOR CURRENT 6.2.2.2,6.2.2.3 POWER MEASUREMENTS 6.3 NORMAL OPERATING CONDITIONS TEMPERATURE TEST8.8 HANDLE STRENGTHANNEX B.2.5 INPUT TEST: SINGLE PHASE B.2.6, 5.4.1.4, 6.3, 9.2 – NORMAL OPERATING CONDITIONS TEMPERATURE MEASUREMENTANNEX B.3 SIMULATED ABNORMAL OPERATINGCONDITIONS ANNEX B.4 SIMULATED SINGLE FAULT CONDITIONS ANNEXF.3.10 TEST FOR THE PERMANENCE OF MARKINGS ANNEXG.5.3.3 TRANSFORMER OVERLOAD TESTS ANNEX G.7.3.2 STRAIN RELIEF TESTANNEX T.2 STEADY FORCE TEST, 10N ANNEX Q.1 LIMITED POWER SOURCE
 2019-06-05

UL Solutions (Demko)

OFF

IEC 60950-1:2005

1.2.2.1 GUIDE INFORMATION PAGE - MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT-AMPERE MEASUREMENT TEST 1.6.2 INPUT TEST: SINGLE-PHASE 1.7.11 DURABILITY OF MARKING TEST 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.2.2, 2.2.3, 2.2.4 SELV RELIABILITY TEST INCLUDING HAZARDOUS VOLTAGE MEASUREMENTS 2.4.1, 2.4.2 LIMITED CURRENT CIRCUIT MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST I 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST II 2.9.1, 2.9.2, 5.2.2 HUMIDITY TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT TEST 2.10.5.9, 2.10.5.10, 2.10.5.6 THIN SHEET MATERIAL TESTS 2.10.5.6, 2.10.5.13 TRANSFORMER AND WIRE INSULATION ELECTRIC STRENGTH TEST 3.2.6, 4.2.1, 4.2.7 STRAIN RELIEF TEST 4.1 STABILITY TESTS4.2.1 - 4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT TEST 4.2.5, 4.2.1, Part 22 10.2 Impact4.2.6, 4.2.1 DROP TEST 4.2.7, 4.2.1 STRESS RELIEF TEST 4.3.2 KNOB PULL/HANDLE LOADING TEST4.5.1, 1.4.12, 1.4.13 HEATING TEST4.5.5 BALL PRESSURE TEST5.1 ANNEX D - TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH TEST 5.3.1, 5.3.4, 5.3. COMPONENT FAILURE TEST 5.3.3, 5.3.7b, ANNEX C.1 TRANSFORMER ABNORMAL OPERATION TEST 5.3.7POWER SUPPLY OUTPUT SHORT- CIRCUIT/OVERLOAD TEST 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST
2019-06-05

UL Solutions (Demko)

OFF

IEC 60950-1:2005/AMD1:2009

1.2.2.1 GUIDE INFORMATION PAGE - MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT-AMPERE MEASUREMENT TEST 1.6.2 INPUT TEST: SINGLE-PHASE 1.7.11 DURABILITY OF MARKING TEST 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.2.2, 2.2.3, 2.2.4 SELV RELIABILITY TEST INCLUDING HAZARDOUS VOLTAGE MEASUREMENTS 2.4.1, 2.4.2 LIMITED CURRENT CIRCUIT MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST I 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST II 2.9.1, 2.9.2, 5.2.2 HUMIDITY TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT TEST 2.10.5.9, 2.10.5.10, 2.10.5.6 THIN SHEET MATERIAL TESTS 2.10.5.6, 2.10.5.13 TRANSFORMER AND WIRE INSULATION ELECTRIC STRENGTH TEST 3.2.6, 4.2.1, 4.2.7 STRAIN RELIEF TEST 4.1 STABILITY TESTS4.2.1 - 4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT TEST 4.2.5, 4.2.1, Part 22 10.2 Impact4.2.6, 4.2.1 DROP TEST 4.2.7, 4.2.1 STRESS RELIEF TEST 4.3.2 KNOB PULL/HANDLE LOADING TEST4.5.1, 1.4.12, 1.4.13 HEATING TEST4.5.5 BALL PRESSURE TEST5.1 ANNEX D - TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH TEST 5.3.1, 5.3.4, 5.3. COMPONENT FAILURE TEST 5.3.3, 5.3.7b, ANNEX C.1 TRANSFORMER ABNORMAL OPERATION TEST 5.3.7POWER SUPPLY OUTPUT SHORT- CIRCUIT/OVERLOAD TEST 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST
2019-06-05

UL Solutions (Demko)

OFF

IEC 60950-1:2005/AMD2:2013

1.2.2.1 GUIDE INFORMATION PAGE - MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT-AMPERE MEASUREMENT TEST 1.6.2 INPUT TEST: SINGLE-PHASE 1.7.11 DURABILITY OF MARKING TEST 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.2.2, 2.2.3, 2.2.4 SELV RELIABILITY TEST INCLUDING HAZARDOUS VOLTAGE MEASUREMENTS 2.4.1, 2.4.2 LIMITED CURRENT CIRCUIT MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST I 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST II 2.9.1, 2.9.2, 5.2.2 HUMIDITY TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT TEST 2.10.5.9, 2.10.5.10, 2.10.5.6 THIN SHEET MATERIAL TESTS 2.10.5.6, 2.10.5.13 TRANSFORMER AND WIRE INSULATION ELECTRIC STRENGTH TEST 3.2.6, 4.2.1, 4.2.7 STRAIN RELIEF TEST 4.1 STABILITY TESTS4.2.1 - 4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT TEST 4.2.5, 4.2.1, Part 22 10.2 Impact4.2.6, 4.2.1 DROP TEST 4.2.7, 4.2.1 STRESS RELIEF TEST 4.3.2 KNOB PULL/HANDLE LOADING TEST4.5.1, 1.4.12, 1.4.13 HEATING TEST4.5.5 BALL PRESSURE TEST5.1 ANNEX D - TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH TEST 5.3.1, 5.3.4, 5.3. COMPONENT FAILURE TEST 5.3.3, 5.3.7b, ANNEX C.1 TRANSFORMER ABNORMAL OPERATION TEST 5.3.7POWER SUPPLY OUTPUT SHORT- CIRCUIT/OVERLOAD TEST 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST
2019-06-05

UL Solutions (Demko)