Philips Goldway (Shenzhen) Industrial Inc. Standard and Reliability Center
Philips Goldway (Shenzhen) Industrial Inc. Standard and Reliability Center
Address(es) |
|
Website | Not available |
Status | MEMBER |
Acceptance date | 2020-09-30 |
Further information
Stage | Country | Name |
---|---|---|
2 | Finland |
LEGEND: Scope Limitations
- RA : Audio amplifiers with audio power > 0,5 Watts excluded
- RC : Apparatus with connection(s) to a cable distribution system excluded
- RSH : Shredders excluded
- RT : Apparatus with connection(s) to a telecommunication network excluded
- RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
- ROUT : Equipment intended for installation outdoors excluded
- RWPT : Wireless power transmitter excluded
Category | Name | Tests/Clauses | Acceptance Date | Responsible National Certification Body |
---|---|---|---|---|
EMC | IEC 60601-1-2:2014 | Accepted clauses: 7.2.1, 7.2.2, 7.3(Conducted Emission 0.15MHz-30MHz), 8.9 (Electrostatic Discharge, Electrical Fast Transients / Bursts, Surges, Conducted Disturbances Induced by RF Fields, Rated power frequency magnetic fields, Voltage Dips and Interruptions) | 2023-09-27 | |
EMC | IEC 60601-1-2:2014/AMD1:2020 | Accepted clauses: 7.2.1, 7.2.2, 7.3(Conducted Emission 0.15MHz-30MHz), 8.9 (Electrostatic Discharge, Electrical Fast Transients / Bursts, Surges, Conducted Disturbances Induced by RF Fields, Rated power frequency magnetic fields, Voltage Dips and Interruptions) | 2023-09-27 | |
MED | IEC 60601-1:2005 | Accepted clauses: 4, 5, 7,8 (Excluding 8.8.4.2, 8.9.1.7),9 (Excluding 9.5.2, 9.6.3, 9.7.5, 9.8),11 (Excluding 11.2, 11.3, 11.6.5, 11.6.7, 11.7),12, 13, 14,15 (Excluding 15.3.5, 15.4.2, 15.4.3.4, 15.4.7, 15.5.2) and 16. | 2020-09-30 | |
MED | IEC 60601-1:2005/AMD1:2012 | Accepted clauses: 4, 5, 7,8 (Excluding 8.8.4.2, 8.9.1.7),9 (Excluding 9.5.2, 9.6.3, 9.7.5, 9.8),11 (Excluding 11.2, 11.3, 11.6.5, 11.6.7, 11.7),12, 13, 14,15 (Excluding 15.3.5, 15.4.2, 15.4.3.4, 15.4.7, 15.5.2) and 16. | 2020-09-30 | |
MED | IEC 60601-1:2005/AMD2:2020 | Accepted clauses: 4, 5, 7, 8(Excluding 8.8.4.2,8.9.1.7), 9(Excluding 9.5.2, 9.6.3, 9.7.5), 11(Excluding 11.2,11.3, 11.6.5, 11.6.7, 11.7), 12, 13, 14, 15(Excluding 15.4.2, 15.4.3.4, 15.4.7, 15.5.2), 16 | 2022-07-04 | |
MED | IEC 60601-1-8:2006 | Accepted clauses: 4, 5 and 6. | 2020-09-30 | |
MED | IEC 60601-1-8:2006/AMD1:2012 | clauses 4, 5 and 6. | 2020-10-14 | |
MED | IEC 60601-1-8:2006/AMD2:2020 | Accepted clauses: 4, 5, 6 | 2022-07-04 | |
MED | IEC 60601-1-11:2015 | Accepted clauses: 4, 5, 6, 7, 8(Excluding 8.3), 9, 10 | 2024-09-23 | |
MED | IEC 60601-1-11:2015/AMD1:2020 | Accepted clauses: 4, 5, 6, 7, 8(Excluding 8.3), 9, 10 | 2024-09-23 | |
MED | IEC 60601-1-12:2014 | Accepted clauses: 4, 5, 6, 7, 8 (Excluding 8.1), 9 and 10. | 2020-09-30 | |
MED | IEC 60601-1-12:2014/AMD1:2020 | Accepted clauses: 4, 5, 6, 7, 8 (Excluding 8.1), 9, 10 | 2022-07-04 | |
MED | IEC 60601-2-4:2010 | Accepted clauses:201.4, 201.5, 201.6, 201.7, 201.8, 201.11 (Excluding201.11.6.5, 201.11.6.7), 201.12, 201.13, 201.15, 201.101, 201.102, 201.103, 201.104, 201.105, 201.106, 201.107, 201.108 (Excluding 201.108.1.5) and 201.109. | 2020-09-30 | |
MED | IEC 60601-2-4:2010/AMD1:2018 | Accepted clauses:201.4, 201.5, 201.6, 201.7, 201.8, 201.11 (Excluding201.11.6.5, 201.11.6.7), 201.12, 201.13, 201.15, 201.101, 201.102, 201.103, 201.104, 201.105, 201.106, 201.107, 201.108 (Excluding 201.108.1.5) and 201.109. | 2020-09-30 | |
MED | IEC 60601-2-25:2011 | Accepted clauses: 201.4, 201.5, 201.6, 201.7, 201.8 and 201.12. | 2020-09-30 | |
MED | IEC 60601-2-27:2011 | Accepted clauses: 201.4, 201.5, 201.6, 201.7, 201.8, 201.11 (Excluding 201.11.6.5), 201.12, 201.15 and 208. | 2020-09-30 | |
MED | IEC 60601-2-30:1999 | Accepted clauses: 3, 4, 5, 6, 14, 17, 19, 20, 21, 22, 42, 44 (Excluding 44.3), 45, 49, 51, 56 and 57. | 2020-09-30 | |
MED | IEC 60601-2-34:2011 | Accepted clauses: 201.4, 201.5, 201.6, 201.7, 201.8, 201.11 (Excluding 201.11.6.5), 201.12, 201.15 and 208. | 2020-09-30 | |
MED | IEC 60601-2-37:2007 | Accepted clauses: 201.4, 201.7, 201.8, 201.10, 201.11 (Excluding 201.11.6.5, 201.11.1.3.1), 201.12, 201.13 and 208. | 2020-09-30 | |
MED | IEC 60601-2-37:2007/AMD1:2015 | Accepted clauses: 201.4, 201.7, 201.8, 201.10, 201.11 (Excluding 201.11.6.5), 201.12, 201.13 and 208. | 2020-09-30 | |
MED | IEC 60601-2-49:2011 | Accepted clauses: 201.4, 201.5, 201.6, 201.7, 201.8, 201.11 (Excluding 201.11.6.5), 201.12, 201.15, 201.16 and 208. | 2020-09-30 | |
MED | IEC 80601-2-30:2018 | Accepted clauses: 201.4, 201.5, 201.7, 201.8, 201.9, 201.10, 201.11, 201.12, 201.13, 201.15, 201.16, 201.17, 201.101 to 201.106, 211 | 2022-07-04 | |
MED | IEC 80601-2-49:2018 | Accepted clauses: 201.4, 201.5, 201.6, 201.7, 201.8, 201.11(Excluding 201.11.6.5), 201.12, 201.15, 201.16, 208 | 2022-07-04 | |
MED | ISO 80601-2-55:2018 | Accepted clauses: 201.4, 201.7, 201.11 (Excluding 201.11.6.5), 201.12, 201.15, 201.101, 201.102, 201.103, 201.104, 201.105, 201.106, 206, 208, 211 and 212. | 2020-09-30 | |
MED | ISO 80601-2-55:2018/AMD1:2023 | Accepted clauses: 201.4, 201.7, 201.11(Excluding 201.11.6.5), 201.12, 201.15, 201.101, 201.102, 201.103, 201.104, 201.105, 201.106, 206, 208, 211, 212 | 2024-09-23 | |
MED | ISO 80601-2-56:2017 | Accepted clauses: 201.4, 201.7, 201.11, 201.12, 201.101, 201.102, 201.103, 206, 208, 211 and 212. | 2020-09-30 | |
MED | ISO 80601-2-56:2017/AMD1:2018 | Accepted clauses: 201.4, 201.7, 201.11, 201.12, 201.101, 201.102, 201.103, 206, 208, 211, 212 | 2022-07-04 | |
MED | ISO 80601-2-61:2017 | Accepted clauses: 201.4, 201.7, 201.8, 201.11 (Excluding 201.11.6.5.101), 201.12 (Excluding 201.12.1.101, 201.12.1.102, 201.12.1.103), 201.13, 201.15, 201.101, 201.102, 201.103, 206, 208, 211 and 212. | 2020-09-30 |