IMBERA S A DE C V

Address(es)
  • CARR MEXICO TEQUISQUIAPAN KM 3.2
    MX-76803 ZONA IND. VALLE DE ORO
    SAN JUAN DEL RIO, QRO
    Mexico

Website Not available
Status

MEMBER

Acceptance date 2019-11-28

Further information

Stage

Country

Name

2

Denmark

UL Solutions (Demko)

LEGEND: Scope Limitations
  • RA : Audio amplifiers with audio power > 0,5 Watts excluded
  • RC : Apparatus with connection(s) to a cable distribution system excluded
  • RSH : Shredders excluded
  • RT : Apparatus with connection(s) to a telecommunication network excluded
  • RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
  • ROUT : Equipment intended for installation outdoors excluded
  • RWPT : Wireless power transmitter excluded

Category

Name

Tests/Clauses

Acceptance Date

Responsible National Certification Body

HOUS

IEC 60335-1:2010

7.14 PERMANENCE OF MARKING8.1.1 TEST FINGER - ACCESSIBILITY OF LIVE PARTS 8.1.2 TEST PIN - ACCESSIBILITY OF LIVE PARTS TEST8.1.4 PROTECTION AGAINST ACCESS TO LIVE PARTS - ACCESSIBLE PART - SELV8.2 TEST FINGER - ACCESSIBILITY OF LIVE PARTS (CLASS II CONSTRUCTIONS)10.1, 10.2 POWER INPUT AND CURRENT, REFRIGERATORS AND FREEZERS11.1- 11.8 HEATING13.2 LEAKAGE CURRENT TEST13.3 ELECTRIC STRENGTH TEST15.2 MOISTURE RESISTANCE-OVERFLOW15.3 MOISTURE RESISTANCE - HUMIDITY16.2 LEAKAGE CURRENT (AFTER HUMIDITY) TEST16.3 ELECTRIC STRENGTH (AFTER HUMIDITY) TEST19.2 ABNORMAL OPERATION - UNDER VOLTAGE & RESTRICTED HEAT DISSIPATION19.3 ABNORMAL OPERATION - OVER VOLTAGE & RESTRICTED HEAT DISSIPATION19.4 ABNORMAL OPERATION (SHORT-CIRCUITED CONTROL) TEST19.5 ABNORMAL OPERATION (TUBULAR SHEATH/EMBEDDED HEATING ELEMENT) TEST19.7 ABNORMAL OPERATION-BLOCKED FAN OR MOTOR19.11.1 ABNORMAL OPERATION - LOW POWER CIRCUIT19.11.2 ABNORMAL OPERATION - ELECTRONIC CIRCUIT - FAULT CONDITIONS19.11.3 ABNORMAL OPERATION - ELECTRONIC CIRCUIT - FAULT CONDITIONS IN A PROTECTIVE ELECTRONIC CIRCUIT19.11.4.8 ABNORMAL OPERATION - UNDER VOLTAGE20.1 STABILITY20.2 TEST PROBE-ACCESSIBILITY OF MOVING PARTS TEST21.1 IMPACT TEST21.2 SCRATCH TEST22.5 CAPACITOR DISCHARGE TEST22.6 SYRINGE (LEAKAGE OF A LIQUID) TEST22.11 NON-DETACHABLE PARTS FIXING RELIABILITY TEST22.12 HANDLE(S), KNOB(S), GRIP(S), AND/OR LEVER(S) AXIAL PULL TEST22.18 INSPECTION FOR CORROSION (FOLLOWING ABNORMAL OPERATION) TEST23.3 MOVABLE PARTS WIRE FLEXING TEST23.5 INTERNAL WIRING INSULATION ELECTRIC STRENGTH TEST24.5 CAPACITOR VOLTAGE25.15 FLEXIBLE CORD PUSH, PULL AND TORQUE TEST27.5 EARTHING IMPEDANCE TEST28.1 SCREW TORQUE TEST29.1, 29.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - STEADY FORCE ON INTERNAL BARE CONDUCTORS 29.3.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION – ELECTRIC STRENGTH TEST ON INSULATION LAYERS 30.1 BALL-PRESSURE TEST30.2 GLOW-WIRE TEST
 2019-11-28

UL Solutions (Demko)

HOUS

IEC 60335-1:2010/AMD1:2013

7.14 PERMANENCE OF MARKING8.1.1 TEST FINGER - ACCESSIBILITY OF LIVE PARTS 8.1.2 TEST PIN - ACCESSIBILITY OF LIVE PARTS TEST8.1.4 PROTECTION AGAINST ACCESS TO LIVE PARTS - ACCESSIBLE PART - SELV8.2 TEST FINGER - ACCESSIBILITY OF LIVE PARTS (CLASS II CONSTRUCTIONS)10.1, 10.2 POWER INPUT AND CURRENT, REFRIGERATORS AND FREEZERS11.1- 11.8 HEATING13.2 LEAKAGE CURRENT TEST13.3 ELECTRIC STRENGTH TEST15.2 MOISTURE RESISTANCE-OVERFLOW15.3 MOISTURE RESISTANCE - HUMIDITY16.2 LEAKAGE CURRENT (AFTER HUMIDITY) TEST16.3 ELECTRIC STRENGTH (AFTER HUMIDITY) TEST19.2 ABNORMAL OPERATION - UNDER VOLTAGE & RESTRICTED HEAT DISSIPATION19.3 ABNORMAL OPERATION - OVER VOLTAGE & RESTRICTED HEAT DISSIPATION19.4 ABNORMAL OPERATION (SHORT-CIRCUITED CONTROL) TEST19.5 ABNORMAL OPERATION (TUBULAR SHEATH/EMBEDDED HEATING ELEMENT) TEST19.7 ABNORMAL OPERATION-BLOCKED FAN OR MOTOR19.11.1 ABNORMAL OPERATION - LOW POWER CIRCUIT19.11.2 ABNORMAL OPERATION - ELECTRONIC CIRCUIT - FAULT CONDITIONS19.11.3 ABNORMAL OPERATION - ELECTRONIC CIRCUIT - FAULT CONDITIONS IN A PROTECTIVE ELECTRONIC CIRCUIT19.11.4.8 ABNORMAL OPERATION - UNDER VOLTAGE20.1 STABILITY20.2 TEST PROBE-ACCESSIBILITY OF MOVING PARTS TEST21.1 IMPACT TEST21.2 SCRATCH TEST22.5 CAPACITOR DISCHARGE TEST22.6 SYRINGE (LEAKAGE OF A LIQUID) TEST22.11 NON-DETACHABLE PARTS FIXING RELIABILITY TEST22.12 HANDLE(S), KNOB(S), GRIP(S), AND/OR LEVER(S) AXIAL PULL TEST22.18 INSPECTION FOR CORROSION (FOLLOWING ABNORMAL OPERATION) TEST23.3 MOVABLE PARTS WIRE FLEXING TEST23.5 INTERNAL WIRING INSULATION ELECTRIC STRENGTH TEST24.5 CAPACITOR VOLTAGE25.15 FLEXIBLE CORD PUSH, PULL AND TORQUE TEST27.5 EARTHING IMPEDANCE TEST28.1 SCREW TORQUE TEST29.1, 29.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - STEADY FORCE ON INTERNAL BARE CONDUCTORS 29.3.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION – ELECTRIC STRENGTH TEST ON INSULATION LAYERS 30.1 BALL-PRESSURE TEST30.2 GLOW-WIRE TEST
 2019-11-28

UL Solutions (Demko)

HOUS

IEC 60335-1:2010/AMD2:2016

7.14 PERMANENCE OF MARKING8.1.1 TEST FINGER - ACCESSIBILITY OF LIVE PARTS 8.1.2 TEST PIN - ACCESSIBILITY OF LIVE PARTS TEST8.1.4 PROTECTION AGAINST ACCESS TO LIVE PARTS - ACCESSIBLE PART - SELV8.2 TEST FINGER - ACCESSIBILITY OF LIVE PARTS (CLASS II CONSTRUCTIONS)10.1, 10.2 POWER INPUT AND CURRENT, REFRIGERATORS AND FREEZERS11.1- 11.8 HEATING13.2 LEAKAGE CURRENT TEST13.3 ELECTRIC STRENGTH TEST15.2 MOISTURE RESISTANCE-OVERFLOW15.3 MOISTURE RESISTANCE - HUMIDITY16.2 LEAKAGE CURRENT (AFTER HUMIDITY) TEST16.3 ELECTRIC STRENGTH (AFTER HUMIDITY) TEST19.2 ABNORMAL OPERATION - UNDER VOLTAGE & RESTRICTED HEAT DISSIPATION19.3 ABNORMAL OPERATION - OVER VOLTAGE & RESTRICTED HEAT DISSIPATION19.4 ABNORMAL OPERATION (SHORT-CIRCUITED CONTROL) TEST19.5 ABNORMAL OPERATION (TUBULAR SHEATH/EMBEDDED HEATING ELEMENT) TEST19.7 ABNORMAL OPERATION-BLOCKED FAN OR MOTOR19.11.1 ABNORMAL OPERATION - LOW POWER CIRCUIT19.11.2 ABNORMAL OPERATION - ELECTRONIC CIRCUIT - FAULT CONDITIONS19.11.3 ABNORMAL OPERATION - ELECTRONIC CIRCUIT - FAULT CONDITIONS IN A PROTECTIVE ELECTRONIC CIRCUIT19.11.4.8 ABNORMAL OPERATION - UNDER VOLTAGE20.1 STABILITY20.2 TEST PROBE-ACCESSIBILITY OF MOVING PARTS TEST21.1 IMPACT TEST21.2 SCRATCH TEST22.5 CAPACITOR DISCHARGE TEST22.6 SYRINGE (LEAKAGE OF A LIQUID) TEST22.11 NON-DETACHABLE PARTS FIXING RELIABILITY TEST22.12 HANDLE(S), KNOB(S), GRIP(S), AND/OR LEVER(S) AXIAL PULL TEST22.18 INSPECTION FOR CORROSION (FOLLOWING ABNORMAL OPERATION) TEST23.3 MOVABLE PARTS WIRE FLEXING TEST23.5 INTERNAL WIRING INSULATION ELECTRIC STRENGTH TEST24.5 CAPACITOR VOLTAGE25.15 FLEXIBLE CORD PUSH, PULL AND TORQUE TEST27.5 EARTHING IMPEDANCE TEST28.1 SCREW TORQUE TEST29.1, 29.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION - STEADY FORCE ON INTERNAL BARE CONDUCTORS 29.3.2 CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION – ELECTRIC STRENGTH TEST ON INSULATION LAYERS 30.1 BALL-PRESSURE TEST30.2 GLOW-WIRE TEST
 2019-11-28

UL Solutions (Demko)

HOUS

IEC 60335-2-89:2019

5.3 NORMAL OPERATION8.1.1 TEST FINGER - ACCESSIBILITY OF LIVE PARTS 10.2 POWER INPUT AND CURRENT, REFRIGERATORS AND FREEZERS10.101 INPUT-DEFROST11.1 - 11.8 HEATING11.101 HEATING-DEFROST11.102 HEATING – ANCILLARY HEATING ELEMENTS15.102 MOISTURE RESISTANCE-INTERNAL SPILLAGE15.103 MOISTURE RESISTANCE-EXTERNAL SPILLAGE19.101 ABNORMAL OPERATION-ANCILLARY HEATING ELEMENTS19.102 ABNORMAL OPERATION-VARIOUS FAULT CONDITIONS19.103 ABNORMAL OPERATION-LAMP HEATING20.1 STABILITY21.1 IMPACT TEST21.101 LAMP PROTECTION21.102 SHELF LOADING TEST21.103 IMPACT TEST (FLAMMABLE REFRIGERANT CONTAINING PARTS)22.7 CONSTRUCTION - PRESSURE STRENGTH TEST22.102 MOISTURE RESISTANCE-HEATER22.103 ACCESSIBLE GLASS PANELS22.105 DOOR OPENING FORCE22.111.1 LEAKAGE TEST – PROTECTED COOLING SYSTEM22.111.2 SCRATCH TEST22.112 LEAKAGE TEST – UNPROTECTED COOLING SYSTEM22.113 LEAKAGE TEST – OUTSIDE FOOD STORAGE AREA22.114 TEMPERATURE TEST23.3 MOVABLE PARTS WIRE FLEXING TEST24.5 CAPACITOR VOLTAGE30.1 BALL-PRESSURE TEST30.2 GLOW-WIRE TESTAnnex AA ABNORMAL OPERATION - LOCKED ROTOR OF FAN MOTORS
 2022-10-03

UL Solutions (Demko)