CAREL ELECTRONIC (SUZHOU) CO LTD

Address(es)
  • 56 SHILIN ROAD
    SUZHOU 215151
    JIANGSU
    China

Website Not available
Status

WITHDRAWN

Acceptance date 2022-08-16

Further information

Stage

Country

Name

1

Denmark

UL Solutions (Demko)

LEGEND: Scope Limitations
  • RA : Audio amplifiers with audio power > 0,5 Watts excluded
  • RC : Apparatus with connection(s) to a cable distribution system excluded
  • RSH : Shredders excluded
  • RT : Apparatus with connection(s) to a telecommunication network excluded
  • RV : CRT (cathode ray tubes)/ picture tubes, plasma/LCD or other video apparatus excluded
  • ROUT : Equipment intended for installation outdoors excluded
  • RWPT : Wireless power transmitter excluded

Category

Name

Tests/Clauses

Acceptance Date

Responsible National Certification Body

CONT

IEC 60730-1:2013

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)

CONT

IEC 60730-1:2013/AMD1:2015

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)

CONT

IEC 60730-1:2013/AMD2:2020

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)

CONT

IEC 60730-1:2010

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)

CONT

IEC 60730-2-9:2015

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)

CONT

IEC 60730-2-9:2015/AMD1:2018

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)

CONT

IEC 60730-2-9:2015/AMD2:2020

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)

CONT

IEC 60730-2-9:2008

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)

CONT

IEC 60730-2-9:2008/AMD1:2011

CLAUSE 2.1.5, 2.1.6 – SELV (CLASS 2) OUTPUT VOLTAGE MEASUREMENTCLAUSE 8.3.2 - CHARGED CAPACITORS (CAPACITANCE >0.1uF)CLAUSE 9.3 – ADEQUACY OF EARTH CONNECTIONSCLAUSE 10.2.4.3 – PUSH/PULL TEST FOR TABSCLAUSE 12.2 – PROTECTION AGAINST HUMID CONDITIONCLAUSE 13.1 - INSULATION RESISTANCECLAUSE 13.2 – ELECTRIC STRENGTH TESTCLAUSE 13.3 – LEAKAGE CURRENT TEST CLAUSE 14 – HEATING TESTCLAUSE 16.2 – ENVIRONMENTAL STRESS OF TEMPERATURECLAUSE 17 - ENDURANCE TESTCLAUSE 22 – RESISTANCE TO CORROSIONCLAUSE 24 - SWITCH MODE POWER SUPPLY TESTS (SMPS)- OVERLOAD TESTCLAUSE 27.2.3 – BLOCKED MECHANICAL OUTPUT TESTCLAUSE 27.3 – OVER-VOLTAGE AND UNDER-VOLTAGE TESTCLAUSE 27.5 - OVERLOAD TESTCLAUSE H.8 - PROTECTION AGAINST ELECTRIC SHOCKCLAUSE H.11.4, H.27.4 - ELECTRONIC DISCONNECT TESTCLAUSE H.17 – THERMAL CYCLING TESTCLAUSE H.26.15 - EVALUATION OF COMPLIANCECLAUSE H.27.1.1 - ABNORMAL OPERATIONCLAUSE H.27.1.1.1, H.27.1.5 – ELECTRONIC CIRCUIT FAULTS CONDITIONS
 2022-08-16

UL Solutions (Demko)