CTF

Apple Inc.

 
  •  

Standards in Scope

Category
Standard
Tests/Clauses
Acceptance Date
Responsible National Certification Body(s)
MISCIEC 60825-1:2014
5.0 DETERMINATION OF THE ACCESSIBLE EMISSION LEVEL AND PRODUCT CLASSIFICATION 5.1 TESTS 5.2 MEASUREMENT OF LASER RADIATION 5.4 MEASUREMENT GEOMETRY 5.4.1 GENERAL 5.4.2 DEFAULT (SIMPLIFIED) EVALUATION 5.4.3 EVALUATION CONDITION FOR EXTENDED SOURCES
2018-03-29
MISCIEC 60825-1:2007
9 DETERMINATION OF THE ACCESSIBLE EMISSION LEVEL 9.1 TESTS 9.2 MEASUREMENT OF LASER RADIATION 9.3 MEASUREMENT GEOMETRY 9.3.1 GENERAL 9.3.2 DEFAULT (SIMPLIFIED) EVALUATION 9.3.3 EVALUATION CONDITION FOR EXTENDED SOURCES
2018-03-29
OFFIEC 60950-1:2005
1.6.2 INPUT: SINGLE-PHASE 1.7.11 DURABILITY 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE; VOLTAGE MEASUREMENT 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4 PROTECTIVE BONDING 4.1 STABILITY TESTS 4.2.1-4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT 4.2.7, 4.2.1 STRESS RELIEF TEST 4.5.1, 1.4.12, 1.4.13 HEATING TEST 4.6.5 BARRIER ADHESIVE 5.1 TOUCH CURRENT 5.2.2 ELECTRIC STRENGTH TEST 5.3.1 - 5.3.9 ABNORMAL OPERATION TESTS
2018-03-29
OFFIEC 60950-1:2005/AMD1:2009
1.6.2 INPUT: SINGLE-PHASE 1.7.11 DURABILITY 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE; VOLTAGE MEASUREMENT 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4 PROTECTIVE BONDING 4.1 STABILITY TESTS 4.2.1-4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT 4.2.7, 4.2.1 STRESS RELIEF TEST 4.5.1, 1.4.12, 1.4.13 HEATING TEST 4.6.5 BARRIER ADHESIVE 5.1 TOUCH CURRENT 5.2.2 ELECTRIC STRENGTH TEST 5.3.1 - 5.3.9 ABNORMAL OPERATION TESTS
2018-03-29
OFFIEC 60950-1:2005/AMD2:2013
1.6.2 INPUT: SINGLE-PHASE 1.7.11 DURABILITY 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE; VOLTAGE MEASUREMENT 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4 PROTECTIVE BONDING 4.1 STABILITY TESTS 4.2.1-4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT 4.2.7, 4.2.1 STRESS RELIEF TEST 4.5.1, 1.4.12, 1.4.13 HEATING TEST 4.6.5 BARRIER ADHESIVE 5.1 TOUCH CURRENT 5.2.2 ELECTRIC STRENGTH TEST 5.3.1 - 5.3.9 ABNORMAL OPERATION TESTS
2018-03-29
TRONIEC 60065:2014
10.3 HUMIDITY TREATMENT 11 DIELECTRIC STRENGTH AFTER FAULT CONDITIONS 12.1.2 BUMP TEST 12.1.4 DIELECTRIC STRENGTH AFTER IMPACT TEST 12.1.5 DIELECTRIC STRENGTH TEST AFTER DROP TEST 12.1.6 STRESS RELIEF TEST 13.3 CLEARANCES 13.4 CREEPAGE DISTANCES 14.8 SAFETY INTERLOCKS 15.2 PROTECTIVE EARTH TERMINAL RESISTANCE TEST 17.1 SCREW SECUREMENT TEST 17.3 ELECTRICAL CONNECTIONS AND MECHANICAL FIXINGS - FIXING DEVICES 17.7 ELECTRICAL CONNECTIONS AND MECHANICAL FIXINGS, TOUCH CURRENT AFTER ENCLOSURE RESISTANCE TO EXTERNAL FORCES TEST AND COVER FIXING TESTS 17.9 ELECTRICAL CONNECTIONS AND MECHANICAL FIXINGS - INTERNAL CONNECTIONS 19.2 STABILITY & MECHANICAL HAZARDS- 10° TO THE HORIZONTAL, 19.3 STABILITY & MECHANICAL HAZARDS- VERTICAL FORCE 19.4 HORIZONTAL FORCE TEST 19.5 STABILITY & MECHANICAL HAZARDS-TEST OF EDGES AND CORNERS 20 PWB VOLTAGE AND POWER MEASUREMENT TEST 4.2.5 (A) NORMAL OPERATING CONDITIONS -AUDIO AMPLIFIER 4.3.10 FAULT CONDITIONS: OUTPUT TERMINAL OVERLOAD 4.3.11 FAULT OCNDITIONS: VENTILATION OPENINGS BLOCKED 4.3.12 FAULT CONDITIONS, REVERSED POLARITY TEST ON BATTERIES 4.3.14 FAULT CONDITIONS, VOLTAGE MISMATCH 4.3.15 FAULT CONDITIONS, SPECIAL SUPPLY APPARATUS WITH OUTPUT VOLTAGE SETTING DEVICE 4.3.16 FAULT CONDITIONS:APPARATUS SUPPLIED BY SUPPLY APPARATUS FOR GENERAL USE 4.3.6 FAULT CONDITIONS, MAXIMUM POWER FOR AUDIO AMPLIFIER 5 MARKING DURABILITY AND LEGIBILITY 5.2 IDENTIFICATION AND SUPPLY RATINGS 5.3 TERMINALS 7.1 HEATING UNDER NORMAL OPERATING CONDITIONS 8.13 COVERS, EXTERNAL FORCE TEST 8.14 CONSTRUCTIONAL REQUIREMENTS WITH REGARD TO THE PROTECTION AGAINST ELECTRIC SHOCK - WIRING INSULATION 8.21 CONSTRUCTIONAL REQUIREMENTS WITH REGARD TO THE PROTECTION AGAINST ELECTRIC SHOCK - THIN SHEET MATERIAL 8.3 HUMIDITY TREATEMENT OF HYGROSCOPIC INSULATING MATERIALS 8.8 WINDING INSULATION TEST 9.1.1.1 ELECTRIC SHOCK HAZARD UNDER NORMAL OPERATING CONDITIONS 9.1.1.2 ELECTRIC SHOCK HAZARD UNDER NORMAL OPERATING CONDITIONS - HAZARDOUS LIVE 9.1.3 OPENINGS OF THE ENCLOSURE 9.1.6 WITHDRAWAL OF MAINS PLUG 9.1.7 ENCLOSURE RESISTANCE TO EXTERNAL FORCES TEST 9.2 REMOVAL OF PROTECTIVE COVERS TABLE 21 DISTANCES FROM POTENTIAL IGNITION SOURCES & CONSEQUENTIAL FLAMMABILITY CATEGORIES
2018-03-29