CTF

Eaton

 
  •  

Standards in Scope

Category
Standard
Tests/Clauses
Acceptance Date
Responsible National Certification Body(s)
OFFIEC 60950-1:2005
1.2.2.1 MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT AMPERE MEASUREMENT 1.5.6 CAPACITOR BRIDGING INSULATION 1.5.7 RESISTORS BRIDGING INSULATION 1.6.2 INPUT TEST: SINGLE-PHASE 1.6.2 INPUT TEST: POLYPHASE 2.1.1.5, 2.1.2, 1.2.8.10 ENERGY HAZARD MEASUREMENTS 2.1.1.7 CAPACITANCE DISCHARGE 2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE 2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT 2.2.2, 2.2.3, 2.2.4 SELV RELIABILITY 2.4.1, 2.4.2 LIMITED CURRENT CIRCUIT MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING I 2.6.3.4, 2.6.1 PROTECTIVE BONDING II 3.2.6, 4.2.1, 4.2.7 STRAIN RELIEF TEST 4.1 STABILITY 4.2.1 - 4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT 4.3.8 BATTERY 4.5.1, 1.4.12, 1.4.13 HEATING TEST 5.1, ANNEX D TOUCH CURRENT TEST (POLYPHASE; TN/TT SYSTEM) 5.1, ANNEX D TOUCH CURRENT (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH 5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE 5.3.1-5.3.9 ABNORMAL OPERATION TESTS 5.3.3, 5.3.7B, ANNEX C.1 TRANSFORMER ABNORMAL OPERATION TEST 5.3.4, 5.2 ELECTRIC STRENGTH TEST FOR SPACING DEFICIENT PWBS 5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR
2010-01-08
OFFIEC 60950-1:2005/AMD1:2009
1.2.2.1 MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT AMPERE MEASUREMENT 1.5.6 CAPACITOR BRIDGING INSULATION 1.5.7 RESISTORS BRIDGING INSULATION 1.6.2 INPUT TEST: SINGLE-PHASE 1.6.2 INPUT TEST: POLYPHASE 1.6.2 INPUT 2.1.1.5, 2.1.2, 1.2.8.10 ENERGY HAZARD MEASUREMENTS 2.1.1.7 CAPACITANCE DISCHARGE 2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT 2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT 2.2 SELV RELIABILITY 2.4 LIMITED CURRENT CIRCUIT MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING I 2.6.3.4, 2.6.1 PROTECTIVE BONDING II 3.2.6, 4.2.1, 4.2.7 STRAIN RELIEF 4.1 STABILITY 4.2.1-4.2.4 STEADY FORCE 4.2.5, 4.2.1 IMPACT 4.3.8 BATTERY 4.5 HEATING 5.1, ANNEX D TOUCH CURRENT (POLYPHASE; TN/TT SYSTEM) 5.1, ANNEX D TOUCH CURRENT (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH 5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE 5.3.1-5.3.9 ABNORMAL OPERATION 5.3.3, 5.3.7B, ANNEX C.1 TRANSFORMER ABNORMAL OPERATION 5.3.4, 5.2 ELECTRIC STRENGTH - SPACING DEFICIENT PWBS 5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR
2010-01-08
OFFIEC 60950-1:2005/AMD2:2013
1.2.2.1 MAXIMUM OUTPUT VOLTAGE, CURRENT, AND VOLT AMPERE MEASUREMENT TEST 1.5.6 CAPACITOR BRIDGING INSULATION 1.5.7.2, 1.5.7.3 RESISTOR TEST - BRIDGING DOUBLE/REINFORCED INSULATION BETWEEN AC MAINS AND OTHER CIRCUITS, ANTENNA OR COAXIAL CABLE 1.6.2 INPUT TEST: SINGLE-PHASE 1.6.2 INPUT TEST: POLYPHASE 2.1.1.5, 2.1.2, 1.2.8.10 ENERGY HAZARD MEASUREMENTS 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT 2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT 2.2 SELV CIRCUITS 2.4 LIMITED CURRENT CIRCUIT MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST I 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST II 3.2.6, 4.2.1, 4.2.7 STRAIN RELIEF TEST 4.1 STABILITY TESTS 4.2.1 - 4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT TEST 4.3.8 BATTERY TESTS 4.5.1, 1.4.12, 1.4.13 HEATING TEST 5.1, ANNEX D TOUCH CURRENT TEST (POLYPHASE; TN/TT SYSTEM) 5.1, ANNEX D TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH TEST 5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE TEST 5.3.1, 5.3.9 ABNORMAL OPERATION TESTS 5.3.3, 5.3.7B, ANNEX C.1 TRANSFORMER ABNORMAL OPERATION TEST 5.3.4, 5.2 ELECTRIC STRENGTH TEST (FOR SPACING DEFICIENT PWBS) 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST 5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD TEST
2014-01-03
OFFIEC 62040-1:2008
4.6, 1.6.1/RD, 1.6.2/RD, 1.6.4/RD POWER INTERFACES 4.7.20, 5.1.1 ENERGY HAZARDS MEASUREMENTS 5.1.4, ANNEX I BACKFEED PROTECTION 5.2.1, 2.2/RD SAFETY EXTRA LOW VOLTAGE CIRCUITS – SELV 5.2.3 LIMITED CURRENT CIRCUITS 5.2.5, 2.5/RD LIMITED POWER SOURCE 5.3, 2.6.4/RD EARTHING TEST II 5.3, 2.6.4/RD EARTHING TEST I 5.6.2.7 CAPACITOR BANKS 5.7 CLEARANCES, CREEPAGE DISTANCES AND DISTANCES THROUGH INSULATION 6.2.1 GENERAL PROVISIONS FOR CONNECTION TO POWER 6.2.1, 3.2.6/RD, 4.2.1/RD, 4.2.7/RD STRAIN RELIEF TEST 7.2, 4.1/RD STABILITY TESTS 7.3, 4.2.2/RD, 4.2.3/RD, 4.2.4/RD STEADY FORCE TEST 7.3, 4.2.5/RD IMPACT TEST 7.7, 4.5/RD TEMPERATURE RISE 8.1, 5.1.1/RD GENERAL PROVISIONS FOR EARTH LEAKAGE 8.2, 5.2/RD ELECTRIC STRENGTH 8.3 ABNORMAL OPERATING AND FAULT CONDITION 8.3.2 POWER SUPPLY/OVERLOAD 8.3.2 COMPONENT SHORT AND OPEN CIRCUIT 8.3.2 TRANSFORMER ABNORMAL OPERATION 8.3.2, 8.3.3 SIMULATIONS OF FAULTS ANNEX I.2 PLUGGABLE TYPE A UPS ANNEX I.3 PERMANENTLY CONNECTED UPS ANNEX I.4 LOAD-INDUCED CHANGE OF REFERENCE PROTENTION (BACKFEED SINGLE FAULT CONDITIONS)
2012-01-06
OFFIEC 62040-1:2008/AMD1:2013
4.6, 1.6.1/RD, 1.6.2/RD, 1.6.4/RD POWER INTERFACES 4.7.20, 5.1.1 ENERGY HAZARDS MEASUREMENTS 5.1.4, ANNEX I BACKFEED PROTECTION 5.2.1, 2.2/RD SAFETY EXTRA LOW VOLTAGE CIRCUITS – SELV 5.2.3 LIMITED CURRENT CIRCUITS 5.2.5, 2.5/RD LIMITED POWER SOURCE 5.3, 2.6.4/RD EARTHING TEST II 5.3, 2.6.4/RD EARTHING TEST I 5.6.2.7 CAPACITOR BANKS 5.7 CLEARANCES, CREEPAGE DISTANCES AND DISTANCES THROUGH INSULATION 6.2.1 GENERAL PROVISIONS FOR CONNECTION TO POWER 6.2.1, 3.2.6/RD, 4.2.1/RD, 4.2.7/RD STRAIN RELIEF TEST 7.2, 4.1/RD STABILITY TESTS 7.3, 4.2.2/RD, 4.2.3/RD, 4.2.4/RD STEADY FORCE TEST 7.3, 4.2.5/RD IMPACT TEST 7.7, 4.5/RD TEMPERATURE RISE 8.1, 5.1.1/RD GENERAL PROVISIONS FOR EARTH LEAKAGE 8.2, 5.2/RD ELECTRIC STRENGTH 8.3 ABNORMAL OPERATING AND FAULT CONDITION 8.3.2 POWER SUPPLY/OVERLOAD 8.3.2 COMPONENT SHORT AND OPEN CIRCUIT 8.3.2 TRANSFORMER ABNORMAL OPERATION 8.3.2, 8.3.3 SIMULATIONS OF FAULTS ANNEX I.2 PLUGGABLE TYPE A UPS ANNEX I.3 PERMANENTLY CONNECTED UPS ANNEX I.4 LOAD-INDUCED CHANGE OF REFERENCE PROTENTION (BACKFEED SINGLE FAULT CONDITIONS)
2019-08-14