CTF

Cisco Photonics S.r.l.

 
  •  

Standards in Scope

Category
Standard
Tests/Clauses
Acceptance Date
Responsible National Certification Body(s)
ITAVIEC 62368-1:2014
5.2, 5.7 CLASSIFICATION OF ELECTRICAL ENERGY SOURCES 5.4.1.4, ANNEX B.2 MAXIMUM OPERATING TEMPERATURE FOR MATERIALS, COMPONENTS AND SYSTEMS 5.4.1.8 DETERMINATION OF WORKING VOLTAGE 5.4.9 ELECTRIC STRENGTH 5.5.2.2 SAFEGUARDS AGAINST CAPACITOR DISCHARGE AFTER DISCONNECTION OF A CAPACITOR 5.6.4, ANNEX R PROTECTIVE BONDING CONDUCTORS: LIMITED SHORT CIRCUIT TEST 5.6.6.2(A) RESISTANCE OF THE PROTECTIVE BONDING SYSTEM 5.7 PROSPECTIVE TOUCH VOLTAGE AND TOUCH CURRENT MEASUREMENT 5.7.5 PROTECTIVE CONDUCTOR CURRENT 6.2.2.2, 6.2.2.3 POWER MEASUREMENTS 6.2.3.1 ARCING PIS DETERMINATION 6.2.3.2 RESISTIVE PIS DETERMINATION 6.3 NORMAL OPERATING CONDITIONS TEMPERATURE TEST 6.6 TEST TO DETERMINE DELIVERED POWER: PS2 DETERMINATION 8.5.3, ANNEX T.8, ANNEX V SAFEGUARDS AGAINST MOVING PARTS 8.8 HANDLE STRENGTH 9.2.5 TOUCH TEMPERATURE TEST ANNEX B.2.5 INPUT TEST: POLYPHASE ANNEX B.2.5 INPUT TEST: SINGLE PHASE ANNEX B.2.6 NORMAL OPERATING CONDITIONS TEMPERATURE MEASUREMENT ANNEX B.3 SIMULATED ABNORMAL OPERATING CONDITIONS ANNEX B.4 SIMULATED SINGLE FAULT CONDITIONS ANNEX P.2.3.2 CONSEQUENCE OF ENTRY TEST ANNEX T.2 - T.5 STEADY FORCE TEST (10N, 30N, 100N, 250N) ANNEX T.6 ENCLOSURE IMPACT TEST M.3.2 PROTECTION CIRCUITS FOR BATTERIES Q.1 LIMITED POWER SOURCE
2018-06-14
OFFIEC 60950-1:2005
1.6.2 INPUT TEST: SINGLE-PHASE 2.1.1.1, 2.8.2 ACCESS TO ENERGIZED PARTS TEST 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.1.1.8 ENERGY HAZARD MEASUREMENTS - DC MAINS SUPPLIES 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT 2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE 2.2.2, 2.2.3, 2.2.4 SELV RELIABILITY TEST INCLUDING HAZARDOUS VOLTAGE MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST I 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST II 4.2.1 - 4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT TEST 4.3.1 SHARP EDGE 4.3.2 KNOB PULL/HANDLE LOADING TEST 4.3.5 CONNECTOR CURRENT INTERRUPTION TEST 4.5.1, 1.4.12, 1.4.13 HEATING TEST 4.6.5 BARRIER ADHESIVE TEST 5.1, ANNEX D TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH TEST 5.3.1 - 5.3.9 ABNORMAL OPERATION 5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE TEST 5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD TEST 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST
2015-05-04
OFFIEC 60950-1:2005/AMD1:2009
1.6.2 INPUT TEST: SINGLE-PHASE 2.1.1.1, 2.8.2 ACCESS TO ENERGIZED PARTS TEST 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.1.1.8 ENERGY HAZARD MEASUREMENTS - DC MAINS SUPPLIES 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT 2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE 2.2.2, 2.2.3, 2.2.4 SELV RELIABILITY TEST INCLUDING HAZARDOUS VOLTAGE MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST I 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST II 4.2.1 - 4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT TEST 4.3.1 SHARP EDGE 4.3.2 KNOB PULL/HANDLE LOADING TEST 4.3.5 CONNECTOR CURRENT INTERRUPTION TEST 4.5.1, 1.4.12, 1.4.13 HEATING TEST 4.6.5 BARRIER ADHESIVE TEST 5.1, ANNEX D TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH TEST 5.3.1 - 5.3.9 ABNORMAL OPERATION 5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE TEST 5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD TEST 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST
2015-05-04
OFFIEC 60950-1:2005/AMD2:2013
1.6.2 INPUT TEST: SINGLE-PHASE 2.1.1.1, 2.8.2 ACCESS TO ENERGIZED PARTS TEST 2.1.1.7 CAPACITANCE DISCHARGE TEST 2.1.1.8 ENERGY HAZARD MEASUREMENTS - DC MAINS SUPPLIES 2.10.2 DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT TEST 2.10.2 DETERMINATION OF WORKING VOLTAGE - HAZARDOUS VOLTAGE (CIRCUIT) MEASUREMENT 2.10.2 DETERMINATION OF WORKING VOLTAGE - SECONDARY OUTPUT VOLTAGE 2.2.2, 2.2.3, 2.2.4 SELV RELIABILITY TEST INCLUDING HAZARDOUS VOLTAGE MEASUREMENTS 2.5 LIMITED POWER SOURCE MEASUREMENTS 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST I 2.6.3.4, 2.6.1 PROTECTIVE BONDING TEST II 4.2.1 - 4.2.4 STEADY FORCE TESTS 4.2.5, 4.2.1 IMPACT TEST 4.3.1 SHARP EDGE 4.3.2 KNOB PULL/HANDLE LOADING TEST 4.3.5 CONNECTOR CURRENT INTERRUPTION TEST 4.5.1, 1.4.12, 1.4.13 HEATING TEST 4.6.5 BARRIER ADHESIVE TEST 5.1, ANNEX D TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM) 5.2.2 ELECTRIC STRENGTH TEST 5.3.1 - 5.3.9 ABNORMAL OPERATION 5.3.1, 5.3.4, 5.3.7 COMPONENT FAILURE TEST 5.3.7 POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD TEST 5.3.7 OVERLOAD OF OPERATOR ACCESSIBLE CONNECTOR TEST
2015-05-04