IECEE Working Groups

IECEE Working Groups
CMC-WG Composition:
CMC-WG Restricted Area

Board of Appeals

Terms of Reference:

a) to recommend a solution to any dispute referred to it with regard to the application of these basic rules, and

b) to recommend actions to be taken against NCBs and CBTLs on complaints received regarding potential infringements to the Rules that could compromise the credibility of the IECEE Schemes.

c) to report to the CMC, for appropriate action, any observations relating to the technical content of the standards accepted for use in the IECEE and their applications, that has become evident when investigating a dispute

dividor

Chairman:

Don Mader
UL Inc

dividor

Members:

photo Moliski

Joe Gryn
Underwriters Laboratories of Canada (until 2008-12-31)

Paul Moliski
ITS USA

Trond Sollie
NEMKO A/S

Bo Yumin
CNCA

Yoji Ono
JQA

dividor

Deputies:

Gerhard Dreger
VDE

Paul Tan
TÜV SÜD PSB Corporation Pte Ltd

Jukka Vuorinen
SGS Fimko Ltd

Ted Gaertner
KEMA Quality B.V.

Back to the top

dividor

IECEE Chairman's Advisory Group (CAG )

Terms of Reference:

To advise the IECEE Officers on issues that are decided by the Chairman and tabled at each meeting.

dividor

Members:

Gosta Fredriksson
IECEE Chairman

Pierre de Ruvo
IECEE Executive Secretary

Jun Xie
IECEE Vice-Chairman

Fritz Beglinger
Treasurer IECEE

Don Mader
UL Inc

Trond Sollie
NEMKO A/S

Kurt Heinz
TÜV Rh JAPAN

Kiyoto Mitsui
JISC

Gerhard Dreger
VDE

Joe Gryn
Underwriters Laboratories of Canada

Wolfgang Kreinberg
TÜV SÜD PS

Richard Pescatore
USNC/IECEE

dividor

Ex-Officio:

Aharon Amit
General Secretary IEC

Back to the top

dividor

IECEE Peer Assessment Committee (PAC)

Terms of Reference:

• To monitor the Peer Assessment Program

• To determine common understanding of ISO/IEC Guide 65 and ISO/IEC 17025

• To clarify matters pertaining to Certification issues

• To evaluate the Assessment Reports of candidate NCBs and CBTLs and make recommendations to the CMC

• To support and contribute as lecturers at the IECEE Lead and Technical Assessor training courses

dividor

Chairman:

Pierre de Ruvo
IECEE Executive Secretary

dividor

Members:

Gosta Fredriksson
IECEE Chairman

Jun Xie
IECEE Vice-Chairman

Alberto Pederneschi
IMQ S.p.A

Don Mader
UL Inc

Joe Gryn
Underwriters Laboratories of Canada

Wolfgang Kreinberg
TÜV SÜD PS

Mario Wittner
IRAM

Trond Sollie
NEMKO A/S

Gerhard Dreger
VDE

Masahiro Sato
JET

Bian Jing
CQC

dividor

Observer as member of PAAG:

Craig Diack-Evans
Intertek Testing & Certification Ltd.

Back to the top

dividor

PAC SG 1 (previously CMC-WG 11) "Peer Assessment Documents "

Restricted area PAC SG 1 (for PAC SG Members only)

Terms of Reference:

a) Development of Guides and Operational Documents pertaining to the Peer Assessment programme as required.
b) Maintenance of OD-CB2004, OD-CB2005, OD-CB2006, OD-CB2007, ODCB2010, OD-CB2011, OD-CB2016, OD-CB2017, OD-CB2021

dividor

Convenor:

Pierre de Ruvo
IECEE Executive Secretary

dividor

Members:

Trond Sollie
NEMKO A/S

Don Mader
UL Inc

Joe Gryn
Underwriters Laboratories of Canada

Alberto Pederneschi
IMQ S.p.A

Wolfgang Kreinberg
TÜV SÜD PS

Back to the top

dividor

Policy & Strategy Forum

Restricted area Policy & Strategy Forum (for Forum Members only)

Terms of Reference:

To identify market needs and propose IECEE market solutions to meet those needs and to maintain hight quality third party conformity assessment principles.

To propose mechanisms for ensuring that the IECEE Conformity Assessment solutions are recognized as the basis for certification and acceptance in regulated markets world wide in a timely way.

To develop a framework or road map for the development of conformity assessment solutions within the IECEE scheme including such elements as:

a) Type Test Certification
b) Access to the marks of other Certification Bodies
c) Full Certification Scheme.
d) IECEE Conformity Assessment solutions that facilitate market access and relevance, including SDoC.

dividor

Convenor:

Gosta Fredriksson
IECEE Chairman

dividor

Secretary:

Pierre de Ruvo
IECEE Executive Secretary

dividor

	Senior Conformity Assessment Delegate Members		Senior Industry Delegate Members
	Joe Gryn Underwriters Laboratories of Canada		Bill Bryans BryBrook Consulting
	Du Chunjing CNCA Alternate: Bian Jing CQC		YU Zida China Haier Group Corporation
	Gitte Schjotz UL Demko		Tim Duffy Rockwell Automation
	Gerhard Dreger VDE		Uwe Kampet BSH Alternate: Jörg Hartge ZVEI
	Jukka Vuorinen SGS Fimko Ltd		Jari Yli-Juuti ABB Finland
	Michel Brenon LCIE		Jean-Pierre Isnard FIEEC
			Rafi Friedman Brimag Digital-Age
	Giancarlo Zappa IMQ S.p.A		Giovanni Cassinelli Bticino S.p.A. Alternate: Matteo Gavazzeni GEWISS S.p.A
	Yumi Negami JISC		Toshiyuki Kajiya Panasonic
	Franklin Willemstein Kema		Wim Honig Philips
	Fredrik Wennersten Intertek Semko		Stefan Kjellnäs ABB
	Mike Lawson Intertek Testing & Certification Ltd.		Bob Taylor Coutant Lambda Ltd.
	Don Mader UL Inc Alternate: Dave Surber TUV Rheinland		Richard Pescatore USNC/IECEE Alternate: John Mahanna IBM
Back to the top

CMC-WG 1 "Current Decisions"

This Working Group has been disbanded.

dividor

Back to the top

dividor

CMC-WG 2 "Business Development"

Restricted area WG 2 (for WG Members only)

Terms of Reference:

To explore further the market needs focusing around the electrotechnical sector (i.e. EMC, etc.) as well as other fields of interest for the industry.

To analyze and survey any possible business development services that could be of interest for the IECEE.

dividor

Convenor:

Wolfgang Kreinberg
TÜV SÜD PS

dividor

Members:

Yumi Negami
JISC

Kenji Fukasawa
JQA

photo fukasawa

Kurt Heinz
TÜV Rh JAPAN

Fulvio Giorgi
IMQ S.p.A - IT MB

photo Mr. Margis

Steven Margis
UL Inc

Uwe Kampet
GERMAN-NC/IECEE

photo Kampet

Trond Sollie
NEMKO A/S

Jukka Vuorinen
SGS Fimko Ltd

Weng-Hoe Chong
TÜV SÜD PSB Corporation Pte Ltd

Yaacov Wachtel
SII

photo Wachtel

Ron Collis
Rockwell Automation

Nick Maalouf
QPS

Back to the top

dividor

CMC-WG 3 "Manufactory Testing Laboratories"

Restricted area WG 3(for WG Members only)

Terms of Reference:

To analyse and develop procedures related to the Manufactory Testing Laboratories programme.

dividor

Convenor:

Michel Brenon
LCIE

dividor

Members:

Joe Gryn
Underwriters Laboratories of Canada

Fulvio Giorgi
IMQ S.p.A

Randolf Keller
TÜV Rh JAPAN

Tuneyuki Sato
JET

photo Mr. Sato

wolfgang

Wolfgang Kreinberg
TÜV SÜD PS

Robin Tizzard
BSI

Richard Pescatore
USNC/IECEE

(replacing Jim Conroy)
ITS

Don Mader
UL Inc

Ilan Carmit
SII

photo Carmit

Back to the top

dividor

CMC-WG 4 "Components Acceptance"

Restricted area WG 4 (for WG Members only)

Terms of Reference:

To identify component standards

dividor

Convenor:

Jola Wroblewska
UL Inc

dividor

Members:

Joe Gryn
Underwriters Laboratories of Canada

Bill Fiske
Intertek Testing Services N.A.

Ilan Carmit
SII

Ray Jefferis
Intertek Testing & Certification Ltd.

Ray Jefferis

Mohd Nazif
SIRIM

Back to the top

dividor

CMC-WG 5 "Components Strategic"

Terms of Reference:

1. Examine the current operational practices in the CB Scheme with respect to acceptance of components.
a) Review the results of the survey carried out by the CMC-WG Component.
b) Review the newly developed Guide converted into a Current Decision, Annex 1 of OD-CB2022, that has replaced Decision 1D115 on Acceptance of Components, to identify all situations in which components evaluated in an end-product by the issuing NCB may be not accepted by the recognizing NCB.

2. Carry out a strategic analysis of the current and future needs of the CB Scheme and the FCS with respect to acceptance of components.

3. Develop a proposal or proposals to substantially improve the acceptance of components, with particular emphasis on the needs and expectations related to FCS.

dividor

Convenor:

photo Moliski

Paul Moliski
ITS USA

dividor

Members:

Klaus Kress
VDE - DE MB

Nick Maalouf
QPS

Joe Gryn
Underwriters Laboratories of Canada

Fulvio Giorgi
IMQ S.p.A - IT MB

Pär Zetterberg
Intertek SEMKO AB

Jola Wroblewska
UL Inc - USNC MB

Bill Fiske
ITS N.A. - USNC MB

Jean Lanzo
LCIE - FR MB

Ted Gaertner
KEMA Quality B.V

Bill Burr
CSA International

burr

Back to the top

dividor

CMC-WG 6 "IECEE International Mark"

This Working Group has been disbanded

Back to the top

dividor

CMC-WG 7 "Interrelations between NCBs and CBTLs"

This Working Group has been disbanded

Back to the top

dividor

CMC-WG 8 "F.A.P."

This Working Group has been disbanded

Back to the top

dividor

CMC-WG 9 "TRF"

Restricted area WG 9 (for WG Members only)

Terms of Reference:

To deal with matters pertaining to Test Report Forms.

dividor

Convenor:

Jola Wroblewska
UL Inc

dividor

Members:

Mauro Casari
IMQ S.p.A

Klaus Kress
VDE

Werner Haab
UL Germany

Richard Pescatore
USNC/IECEE

Ralf Knapp
TUV Rh Japan

Bill Lowe
CSA International

Back to the top

dividor

CMC-WG 10 "Maintenance of the IECEE Rules and Operational Documents"

Restricted area WG 10 (for WG Members only)

Terms of Reference:

To Review and update the IECEE Basic Rules, IECEE 01, the Rules of Procedure, IECEE 02, and those Operational Documents that are not under the terms of reference of existing IECEE Working Groups.

To Review Current Decisions that are not within the scope of existing IECEE Working Groups and to incorporate them in the IECEE Rules, IECEE 01, the IECEE Rules of Procedure, IECEE 02 or Operational Documents as appropriate.

To Refer Current Decisions that are within the scope of existing IECEE Working Groups to the appropriate WGs for incorporation into the appropriate Operational Document(s)

dividor

Convenor:

Pierre de Ruvo
IECEE Executive Secretary

dividor

Members:

Gosta Fredriksson
IECEE Chairman

Jun Xie
IECEE Vice-Chairman

Fritz Beglinger
Treasurer IECEE

Don Mader
UL Inc

Trond Sollie
NEMKO A/S

Kurt Heinz
TÜV Rh JAPAN

Kiyoto Mitsui
JISC

Gerhard Dreger
VDE

Joe Gryn
Underwriters Laboratories of Canada

Wolfgang Kreinberg
TÜV SÜD PS

Alberto Pederneschi
IMQ S.p.A

Back to the top

dividor

CMC-WG 12 "Acceptance and Use of IEC Standards"

Restricted area WG 12 (for WG Members only)

Terms of Reference:

To determine the mechanisms of seeking scope extension to new published IEC standards, Editions, Amendments and responsibilities from NCBs when they seek scope extension of new published standards.

dividor

Convenor:

Gerhard Dreger
VDE

dividor

Members:

Johnny Jensen
UL International Demko A/S

Bill Fiske
Intertek Testing Services N.A.

Joe Gryn
ULC

Osmo Väyrynen
SGS Fimko Ltd

photo sato

Masahiro Sato
JET

Tshepo Motsoane
SABS

Back to the top

dividor

CMC-WG 13 "FCS Operations"

Restricted area WG 13 (for WG Members only)

Terms of Reference:

To explore the real market needs and the necessary steps to be undertaken to make the FCS attractive and possible to operate.

dividor

Convenor:

Trond Sollie
NEMKO A/S

dividor

Members:

Joe Gryn
Underwriters Laboratories of Canada

Don Mader
UL Inc

Alberto Pederneschi
IMQ S.p.A

Ted Gaertner
KEMA Quality B.V.

Back to the top

dividor

CMC-WG 14 "Public Information"

Terms of Reference:

To Consider the Japanese proposal in light of the real market needs and propose a database that in addition to providing selected information related to the content of issued CB Test Certificates could also consider the issue pertaining to the National Differences.

dividor

Convenor:

Kurt K. Heinz
TÜV Rh Japan

dividor

Members:

BryBrook Consulting

Michel Brenon
LCIE

Alberto Pederneschi
IMQ S.p.A

Richard Pescatore
USNC/IECEE

Back to the top

dividor

CMC-WG 15 "Database"

Restricted area WG 15 (for WG Members only)

Terms of Reference:

To study the feasibility of a master searchable database that would have a global use within the IECEE operations and administration.

dividor

Convenor:

Paul Tan
TÜV SÜD PSB Corporation Pte Ltd

dividor

Members:

Wei Chen
CQC

Yun Zhang
CQC

Weng-Hoe Chong
TÜV SÜD PSB Corporation Pte Ltd

Len Fleming
Intertek Testing & Certification Ltd.

Jola Wroblewska
UL Inc

BryBrook Consulting

Back to the top

dividor

CMC-WG 16 "Satellite Laboratories"

Restricted area WG 16 (for WG Members only)

Terms of Reference:

To develop a Draft OD that integrates the various comments and concerns as well as the impact measurements.

dividor

Convenor:

Don Mader
UL Inc

dividor

Members:

maquestiau

Ronan Maquestiau
SGS Belgium N.V - Division SGS CEBEC

Joe Gryn
Underwriters Laboratories of Canada

Michel Brenon
LCIE

Wolfgang Kreinberg
TÜV SÜD PS

Johnny Jensen
UL International Demko A/S

Bill Fiske
ITS N.A. - USNC MB

Back to the top

dividor

CMC-WG 17 "PV Manufacturers Assessment, Surveillance
and Audit requirements"

This Working Group has been disbanded

Back to the top

dividor

CMC-WG 18 "Financial Outlook"

This Working Group has been disbanded

dividor

Back to the top

dividor

CMC-WG 20 "Hazardous Substances"
Restricted area WG 20 (for WG Members only)
Terms of Reference: The WG is tasked to identify the elements and procedures that can be used for product's testing and evaluation of Hazardous Substances.

Convenor:
		Jukka Vuorinen SGS Fimko Ltd

Members:
	Ron Collis Rockwell Automation	Ronan Maquestiau SGS Belgium N.V - Division SGS CEBEC
	Qiju Ma (CQC) Alternate: Hu Nan CQC	Michel Brenon LCIE
	Uwe Kampet GERMAN-NC/IECEE	Karl Sander TÜV Rheinland Produkt und Umwelt GmbH
	Toshiyuki Kajiya JISC	Ted Gaertner KEMA Quality B.V.
	Tim Duffy Rockwell Automation
Back to the top

CMC-WG 21 "CBTC Recognition Process"
Restricted area WG 21 (for WG Members only)
Terms of Reference: evaluate the elements that are currently leading to a slowing down of the Recognition process determine and propose the corrective actions that could overcome the reason of the slow down recommend the necessary actions to improve the “Recognition” process of CB Test Certificates by Members NCB without unnecessary requests to the Applicant

Convenor:
		Gunsimar Paintal UL Canada

Members:
	Michel Brenon LCIE
Back to the top

Ad hoc CMC-WG 22 "Validity of IECEE Certificates"
Restricted area WG 22 (for WG Members only)
Terms of Reference: Analysis of the implications for the parties regarding the introduction of validity of CB Test Certificates and the most appropriate mechanism to establish a term of validity for CB Test Certificates.

Convenor:
		Kurt K. Heinz TÜV Rh Japan

Members:
	Alberto Schiuma IRAM	Jason Cooke SAI Global
	Bill Bryans BryBrook Consulting	Fulvio Giorgi IMQ S.p.A - IT MB
	Toshiyuki Kajiya Panasonic	Isaac Thabo Mabena SABS
	Alternate: David Surber TUV Rheinland NA
Back to the top

CMC-WG 23 "Counterfeit"
Restricted area WG 22 (for WG Members only)
Terms of Reference: To be determined.

Convenor:
		Jean-Pierre Isnard FIEEC

Members:
	Richard Pescatore USNC/IECEE	Don Mader UL Inc
	Toshiyuki Kajiya Panasonic	YU Zida China Haier Group Corporation
	Mike Lawson Intertek Testing & Certification Ltd.	Vladimir Filiac EZU
	Luca Taglioretti IMQ	Katharina Seidel TUV RH DE
Back to the top

CMC-WG 24 "Infringement"
Restricted area WG 24 (for WG Members only)
Terms of Reference: 1. Identify the various forms of infringements based on the experiences of the IECEE Secretariat and the Members of WG 24 as well. 2. Explore the infringement issues and propose appropriate administrative measures for the IECEE, including the related responsibilities. 3. Draft a set of rules to consistently manage infringements within the IECEE.

Convenor:
		Don Mader UL Inc

Members:
	Trond Sollie NEMKO A/S	Wolfgang Kreinberg TÜV SÜD PS
	Bo Yumin CNCA	Richard Pescatore USNC/IECEE
	Joe Gryn Underwriters Laboratories of Canada	Patricia Mazibuko NRCS
	Michel Brenon LCIE
Back to the top

IECEE MEE Task Force
Restricted area IECEE MEE Task Force (for Task Force Members only)
Terms of Reference: • To establish a consensus with methods acceptable to determine compliance with all the relevant clauses (related to ISO 14971) of IEC 60601-1 Ed. 3. • To develop a Guideline document & Work Instruction on how to implement the relevant clauses (related to ISO 14971) of IEC 60601-1 Ed. 3. • To develop a Checklist aiming at assisting ME Industry, Official Authorities and Stakeholders around the world, Testing Laboratories and Certification Bodies to properly deal with Risk Management. • To develop an addendum to the Test Report Form IEC 60601-1 to cover the overall requirements pertaining to ISO 14971. • To set up the content of possible trainings to cover Risk Management issues. • To be the Advisory Group on common understanding of ISO 14971 related to IEC 60601-1.

Convenor:
	Alfred Dolan University of Toronto

Members:
Irina Antonov SII		Steve McRoberts UL Europe

Michel Brossoit CSA International		William Midgette FDA, USA

Gary Burgess Medical Devices Assessment Section Office of Devices, Blood and Tissues Therapeutic Goods Administration		Joseph Murnane UL NA

Hans Engels IEC TC62B, WG 15		Massimo Polignano ESAOTE S.p.A.

Ted Gaertner CTL ETF 3 Convenor		Geri Richter Geri-Con

Ms. Monica Gupta SL Power Electronics (SLPE)		Martin Schneeberg TUV SUD

John Jamieson Gary Burgess Medical Devices Assessment Section Office of Devices, Blood and Tissues Therapeutic Goods Administration		Michael Sippl TUV SUD / IEC SC62A

Steli Loznen Convenor IEC/TC62/SC62A/WG17		Paul Tan TUV SUD PSB

Richard J. Markle Philips Medical Systems		Markus Wagner TUV SUD

Stan Mastrangelo		Jola Wroblewska WG 9 Convenor
Back to the top

Software Evaluation Panel
Restricted area IECEE MEE Task Force (for Panel Members only)
Terms of Reference: • To establish a consensus with methods acceptable to determine compliance with Annex R of IEC 60335-1 and Annex H of IEC 60730-1 • To develop a Guideline document & Work Instruction for testing purposes on how to implement the Annex R of IEC 60335-1 and Annex H of IEC 60730-1 • To develop a Checklist aiming at assisting Household Appliances Industry, Official Authorities and Stakeholders in the global market, Testing Laboratories and Certification Bodies to inform the latter with the testing procedures that are going to be applied related to the requirements as specified in Annex R of IEC 60335-1 and Annex H of IEC 60730-1. • To develop an addendum to the TRF IEC 60335 series to cover the overall requirements pertaining to Annex R of IEC 60335-1 and Annex H of IEC 60730-1. This task will be undertaken by the IECEE WG 9 Test Report Forms however the direct input of the Technical Panel “Software Evaluation” is recommended. • To set up the content of possible trainings for NCBs/CBTLs-Manufacturers-IECEE Technical Assessors to cover Software Evaluation issues. • To be the IECEE Advisory Group on common understanding of Annex R of IEC 60335-1 and Annex H of IEC 60730-1

Convenor:
	Rafael Guirado LCOE & Member of TC 61

Members:
Masahiro Sato JET & Convenor of IECEE CTL ETF 1 & Member of TC 61		Bernd Gehrke TC 61 & Chairman MT 23

Dieter Fietz TUV SUD PS		Anura Fernando UL Inc.

Markus Graedler ZF Electronics GmbH		Juan Carlos Molina LCOE

Bernhard Schaefers TUV SUD PS		Maurizio Falorni IMQ

Eckhard Schwendemann ES-TMC		Mauro De Angiolini IMQ

Ralf Schwab VDE

Back to the top