Committee of Testing Laboratories

logo CTL

dividor
CTL HOMEPAGE ABOUT THE CTL DECISION SHEETS TESTING LABS
TESTING EQUIPMENT PROFICIENCY TESTING ETFs AND WORKING GROUPS OPERATIONAL PROCEDURES


Quick access to Product Categories
PRODUCT CATEGORY OFF



IEC 60950
Clause Subject Keywords Sheet
Probe impedance for plug discharge test - Probe impedance
- Plug discharge
- >= 100 MΩ
- 25 pF or less 		DSH 716
IEC 60950(ed.2)
Clause Subject Keywords Sheet
1.2.8.3 Hazardous Voltage - Hazardous Voltage 387
1.7 Marking - Marking 382
1.7.1 Marking and instructions - Marking
- Instructions 		389
1.7.7 Marking of Wiring Terminals - Marking
- Earth-symbol
- Wiring Terminals 		383
2.1.1.1 Connectors and Openings - Contact with hazardous voltages
- test finger 		439
2.9.3, Table 6, Condition 2 Affect of adhesive on Comparative Tracking Index (CTI) of Insulating Tape - Comparative tracking index
- CTI
- insulating tape
- adhesive 		381
2 and 4 Characteristics of user available ports - user available ports 388
2.9.3, Table 6, Condition 3 Affect of solder resist on Comparative Tracking Index (CTI) of Printed Wiring Boards - Comparative tracking index
- CTI
- printed wiring boards
- PWB
- solder resist 		380
4.3.17 Miss-mating of connectors - Modular connector
- Miss-mating 		290
4.3.21 Lithium Cell Protection - Lithium Cell
- Clearances
- Failure mode 		384
4.4.3 Flammability of materials and components - Fire enclosure
- Flammability 		385
5.4.3 and App. C1 Overload of Transformers - Transformers
- Overload 		386
5.4.6 Abnormal test - Abnormal test
- Fault 		390
IEC 60950(ed.3)
Clause Subject Keywords Sheet
General Standard for interactive terminals - Standard applicable 547
Scope Testing of pluggable Type A multi-way power blocks containing MOVs and / or GDTs - Scope 396
1.2.8.4 Hazardous Voltage - Hazardous Voltage 387
1.5.1 Identification of Critical Components – Minimum description criteria Components 524
1.5.1 Identification of Critical Components – Minimum description criteria Components 558
1.5.2 Application of IEC 60320-1 type appliance inlets - 548
1.7 Marking - Marking 382
1.7.7 Marking of Wiring Terminals - Marking
- Earth-symbol
- Wiring Terminals 		383
2.1.1.1 Connectors and Openings - Contact with hazardous voltages
- Test finger 		439
2.3.2 Separation of TNV-3 and SELV circuitry - Separation of TNV-3 circuit and SELV circuit 395
2.9.1 and 2.9.2 Humidity conditioning - insulation
- humidity 		373
2.9.3, Table 6, Condition 2 Affect of adhesive on Comparative Tracking Index (CTI) of Insulating Tape - comparative tracking index
- CTI
- insulating tape
- adhesive 		381
2.9.3, Table 6, Condition 3 Affect of solder resist on Comparative Tracking Index (CTI) of Printed Wiring Boards - comparative tracking index
- CTI
- printed wiring boards
- PWB
- solder resist 		380
2.10.5.2 Test of non-separable thin sheet material - Thin sheet material 392
2 and 4 Characteristics of user available ports - user available ports 388
4.3.13 Laser Components Laser 564
4.5.1 Application of IEC 60320-1 type appliance inlets - 548
5.1.2, last paragraph Touch current for equipment having multiple supplies supplying power simultaneously - touch current for equipment with multiple supplies 394A
5.3.3 and App. C1 Overload of Transformers - Transformers
- Overload 		386
--- Backfeed protection - Backfeed protection 376
--- Protection of users - Antenna
- voltage
- surge test 		446
--- Rule for creepage across grooves and similar surface discontinuities - Creepage
- Grooves
- Conducting path
- Shortest distance
- Through air 		590
Annex P, Normative references Laser Standard - Normative references LASER 538.CTL-ETF2
IEC 60950-1(ed.1)
Clause Subject Keywords Sheet
General Components and sub-assemblies incorporating lasers - Components
- sub-assemblies
- lasers 		563
1.2.4.2, 1.2.6.4, 1.2.8.6, 2.4 Classification and test of digital cameras with built in flashes - digital cameras
- flash circuits
- hazardous voltages 		DSH 633A
1.5.1 Identification of Critical Components – Minimum description criteria - Components 558
1.5.1 Identification of Critical Components – Minimum description criteria - Components 524
1.5.1, 4.3.8 Standard for single secondary accumulator and batteries cells used in portable applications (i.e. laptops) - secondary cells
- batteries
- accumulator 		DSH 616A
1.5.2, 4.5.1, 5.3 Temperature limits of optoelectronic devices used for separation - limits during normal operation
- limits during fault operation 		DSH 560
1.5.2, 4.5.1, 5.3 Temperature limits of optoelectronic devices used for separation - limits during normal operation
- limits during fault operation 		PDSH 560 A
1.5.2, 4.5 Application of IEC 60320-1 type appliance inlet - Appliance inlet
- Thermal limit
- Building-in power supply
 DSH 0737
1.7.2 Place the nameplate in battery compartment? - battery compartment
-name plate 		DSH 634A
1.7.2, 2.7.6 Compliance criteria for safety graphical symbols according to IEC 60417-1, ISO 3864 and ISO 7000. - markings and instructions
- IEC 60417-1, ISO 3864, ISO 7000
- Safety colours and safety signs 		559
1.5.7.2 (IEC 60950- 1:2001) 1.5.6 (IEC 60950-1:2006) Insulation properties of housing of subclass Y capacitors - subclass Y capacitor
- housing
- insulation 		DSH 0738
2.4 measurement frequency of Limited Current Circuits (LCCs) capacitance - LCC
- circuit capacitance
- measurement frequency 		PDSH 755
2.10.5 Internal clearances of optocouplers when used in high altitudes - Altitude correction
- Internal clearance
- High altitude 		PDSH 759
2.10.5.4, Third paragraph Application of Annex U and 2.10.8 to spirally wound insulation required to be treated as a cemented joint - spirally wound insulation
- cemented joints
- Annex U.2 		542.CTL-ETF2
3.4.6 Disconnect device - DC mains supply 447
4.3.13.5 Products employing plug-in laser transceivers - Plug-in
- lasers
- transceivers
- communications 		557
4.3.13.5 Laser Components - Laser 564
5.3.2, Annex B Testing of abnormal conditions of dc motors in secondary circuits - DC fan
- overload
- Annex B 		DSH 631A
subclause 6.2.1 Parts likely to be held or touched during normal use on a portable (laptop) computer - 540.CTL-ETF2
7 Protection of users - Antenna
- voltage
- surge test 		445
Annex P, Normative references Laser Standard - Normative references LASER 538.CTL-ETF2
IEC 60950-1(ed.2)
Clause Subject Keywords Sheet
1.2.4.2, 1.2.6.4, 1.2.8.6, 2.4 Classification and test of digital cameras with built in flashes - digital cameras
- flash circuits
- hazardous voltages 		DSH 633A
1.7.2 Place the nameplate in battery compartment? - battery compartment
- name plate 		DSH 634A
1.5.2, 4.5 Application of IEC 60320-1 type appliance inlet - Appliance inlet
- Thermal limit
- Building-in power supply 		DSH 0737
2.4 measurement frequency of Limited Current Circuits  (LCCs) capacitance - LCC
- circuit capacitance
- measurement frequency 		PDSH 755
2.10.5 Internal clearances of optocouplers when used in high altitudes - Altitude correction
- Internal clearance
- High altitude 		PDSH 759
4.3.5 Push force for connectors - travel adaptors
- connector misconnection 		DSH 0700
1.5.7.2 (IEC 60950- 1:2001) 1.5.6 (IEC 60950-1:2006) Insulation properties of housing of subclass Y capacitors - subclass Y capacitor
- housing
- insulation 		DSH 0738
5.3.2, Annex B Testing of abnormal conditions of dc motors in secondary circuits - DC fan
- overload
- Annex B 		DSH 631A
2010-06-28