Committee of Testing Laboratories

logo CTL

dividor
CTL HOMEPAGE ABOUT THE CTL DECISION SHEETS TESTING LABS
TESTING EQUIPMENT PROFICIENCY TESTING ETFs AND WORKING GROUPS OPERATIONAL PROCEDURES


Quick access to Product Categories
PRODUCT CATEGORY LITE

IEC 60061 IEC 60238(ed.5) IEC 60238(ed.6) IEC 60238(ed.7)
IEC 60238(ed.8) IEC 60400(ed.4) IEC 60400(ed.6);am1 IEC 60570(ed.3);am1;am2
IEC 60570(ed.4) IEC 60598-1(ed.3) IEC 60598-1(ed.4) IEC 60598-1(ed.5)
IEC 60598-1(ed.6) IEC 60598-1(ed.7) IEC 60598-2-1(ed.1);am1 IEC 60598-2-2(ed.2);am1
IEC 60598-2-3(ed.3) IEC 60598-2-4(ed.2) IEC 60598-2-5(ed.2) IEC 60598-2-6(ed.2)
IEC 60598-2-7(ed.1);am1;am2 IEC 60598-2-8(ed.1) IEC 60598-2-8(ed.2) IEC 60598-2-10(ed.1);am1;am2
IEC 60598-2-10(ed.2) IEC 60598-2-12(ed.1) IEC 60598-2-13(ed.1) IEC 60598-2-20(ed.2);am1;am2
IEC 60598-2-22(ed.3);am1 IEC 60838(ed.1) IEC 60838(ed.4) IEC 60921 all editions
IEC 60923 all editions IEC 60927(ed.2);am1 IEC 60929(ed.1) IEC 60929(ed.2)
IEC 60968(ed.1);am1;am2 IEC 60969(ed.1);am1;am2 IEC/TR 60972(ed.1);am1 IEC 61047(ed.1);am1
IEC 60147(ed.2) IEC 61048 (ed.1);am1;am2 IEC 61049(ed.1) IEC 61184(ed.1)
IEC 61184(ed.2) IEC 61347 Series IEC 61347 Series except Parts 2-2, 2-8 and 2-9 IEC 61347-1(ed.1);am1
IEC 61347-2-2(ed.1) IEC 61347-2-7(ed.1) IEC 61347-2-8(ed.1) IEC 61347-2-9(ed.1);am1
IEC 61347-2-11(ed.1) IEC 61347-2-13(ed.1) IEC 62471 IEC 62471


#60061 IEC 60061-1 All editions
Clause Subject Keywords Sheet

General

E27 to G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0746A
General E27 to  G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0813
IEC 60061-3 All editions
Clause Subject Keywords Sheet

General

E27 to G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0746A
General

E27 to  G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0813

7006-22A - 7006-31

 Fixation of the gauge

- Gauge data sheet
- Rotation

- Axial movement 		DSH 802
IEC 60238 All editions
Clause Subject Keywords Sheet
General E27 to G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0746A
General E27 to  G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0813
IEC 60238(ed.5)
Clause Subject Keywords Sheet
--- Edition of the gauge sheet, when testing lampholder - gauge
- lampholder 		258.CTL-ETF5
IEC 60238(ed.6)
Clause Subject Keywords Sheet
4.9.2 Lampholder to be built into ovens - oven 268.CTL-ETF5
IEC 60238(ed.7)
Clause Subject Keywords Sheet
8.5 M11x1 threaded entry - National Mark
- STR
- Threaded entry 		209
Figures 17 & 19 Protection against ingress of water - Drops of liquid
- Holes of equipment
- Ingress of water 		398.CTL-ETF5
IEC 60238(ed.8)
Clause Subject Keywords Sheet
General Gauges - Gauge
- Test Report
- IEC 60061 		554/06
General Lampholder to be built into oven - IEC 60238
- Ovens
- IEC 60335-2-6 		555/06
1 General - Adapter
- E14 / E27
- Scope 		599/07
8-9 Dimensions and protection against electric shock - Gauges
- 7006-30 / 7006-31
- Figure 11 		600/07
12.1 Test method for checking with "feeler gauge" - Feeler gauge
- Circular direction
- Lamp caps 		556/06
IEC 60400(ed.4)
Clause Subject Keywords Sheet
General Gauges - Gauge
- Test Report
- IEC 60061 		207
--- Edition of the gauge sheet, when testing lampholder - gauge
- lampholder 		258.CTL-ETF5
IEC 60400(ed.6);am1;am2
Clause Subject Keywords Sheet
General Gauges - Gauge
- Test Report
- IEC 60061 		554/06
2.3 Push-on lampholders - Push-on lampholder
- New lamps
- Live parts 		124/06
8.2.1
8.2
Standard Sheet 7005-56-2 		G10q - connector's construction - G10q lampholder
- Connector's construction
- Protection against electric shock 		091/06.m
Figure 1
Figure 2
Figure 3
17.5 Fire resistance of material retaining live parts in position - Integrated lampholders
- Fire resistance
- PCBs 		DSH 707
IEC 60432-2 All editions
Clause Subject Keywords Sheet
General

E27 to G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0746A
General

E27 to  G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0813
IEC 60570(ed.3);am1;am2
Clause Subject Keywords Sheet
General Connector with a flexible cord and a normal plus - Connector
- Flexible cord
- Contacts 		203
1 Luminaires with socket outlet connected to track system - Socket-Outlet
- luminaires
- Track system 		204
2.3.3.9 / 5.13 IP 40 indication - Common conclusion
- IP 40 indication
- L.I.P 		205
IEC 60570: 2003 (ed.4)
Clause Subject Keywords Sheet
General 1.7 Fixed luminaire with track - IEC 60570
- 6,5 mm
- Track system 		004/06
Figures

General – 1.7

 Fixed luminaire with track

- IEC 60570
- 6,5 mm

- Track system

DSH 0809

Figures
General Opening for the adapters - Construction
- Openings
- Adapter 		557/06
12 Extra safety circuit equivalent to SELV or double/reinforced insulation. - SELV condition
- Electronic means
- IEC 60364-4-41
- IEC 61140 		558/06
IEC 60598-1 All editions
Clause Subject Keywords Sheet

General

E27 to G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0746A

General

 Luminaires system for 230 V

- Luminaires system
- Extra low voltage

- IEC 60598-2-23 		DSH 0807
General IEC 62262 / EN 50102

- IEC 62262 / EN 50102
- IK code

- Degrees of protection 		DSH 0808
General Metallic paint

- § 6.1
- IEC 60238

- Metallic paint 		DSH 0810

General

 Luminaires for the use with independent control gear

- Independent lamp  control gear
- §§ 1.2.29 – 3.2 – 3.3.1 – 12.4.1 h)

- Information, advice 		DSH 0811
General

E27 to  G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0813

General
1.2.60
2.2

T8 to T5, T8 to T8 and similar lamp adaptors
(including ditto with

                  LED)                                    

- Retro-fit conversion
  units                 
- Semi luminaires

- Lamp adaptors 		DSH 0814

0.2

 Socket-outlet mounted rechargeable luminaire - Rechargeable lamps luminaire

- Socket outlet    

- T ransformer/ Plug

- Battery chargers 		DSH 0816

0.4

Floodlight with mounting accessories

- Floodlight
- Mounting accessories

- Part of installation

DSH 0817

Figures
0.4.2 Instruction manual of a floodlight

- Mounting instructions
- Unfavourable

- Instructions manual 		DSH 0818

0.4.2

Luminaires needing assembly by the user

   

- Common sense
- Easiness of connection

- Pendant luminaires 		DSH 0819

0.4.2 / 12

Luminaires needing reconnection by the installer

-Reconnection
-Extra terminal
-Different voltages
  or wattages

 DSH 0820

0.5

Use of 230V components in 240V luminaires

     

- Lamp control gear

- 230V, 240V

- Rated voltage

 DSH 0821

0.5

Series-compensated luminaire (working voltage)

- Series  capacitors

- 450 V

- Working  voltage

 DSH 0822
0.5 Connecting device with  fuseholder

- Fuse  holder
- Connecting  device
- Fuse

 DSH 0823
0.5 Luminaire marked for lamp GU5,3

- EPCAP Group
- GU 5,3

- GX 5,3 connector 		DSH 0824

Sections 2 and 3

 Classification and marking of Class II with Class III detachable parts

- Class III
- Marking

- Classification 		DSH 0826
3

Definition of basic type reference

- Rated wattage

- Type reference             

- Separately marked

 DSH 0827
3 Marking of lamp types according to IEC 61231 (ILCOS) 

- ILCOS codes

- IEC 61231 

- Test Reports

 DSH 0828
3 Marking on class III luminaires “system”

- Connecting device
- Each connection

- Marking

DSH 0829

Figures

3.2

Marking on small luminaires

- Marking
- Small luminaires

- Supply cord 		DSH 0830
3.2.2 Rated voltage marking

- Filaments lamps
- Rated voltage

- Marking 		DSH 0831
3.2.6 Marking with IP numbers

- IP marking
- Mounting orientations

- Type designation 		DSH 0832
3.2.6 “IP X8” marking

- Marking
- Table J.2

- IP X8 		DSH 0833
3.2.8 Lamp-type information marking

- Manufacturer
- Marking plate

- Instructions 		DSH 0835
3.2.13 Symbol for minimum distance from lighted objects

- Temperature
- Lighted object

- Distance symbol 		DSH 0836
3.2.16 Protective shields

- Marking
- Glass
- Plastic

- Protective shield 		DSH 0837
3.3 Marking / additional information

- Proper installation
- Safety

- Markings 		DSH 0838

4.11 – 4.12

Luminaires to be assembled by

user

- User
- Earth connection
- Ready-made plugs and

  connectors 		PDSH 0852
4.11.3 Locking device for screws

- Locking device

- Mechanical connections

- Fixing screws

 PDSH 0853
4.11.3 Screw connections

- Small “spikes”

- Locking of screw connections

- Ballast

PDSH 0854

Figures
4.11.3 Electrical connections

- Construction

- Connections

- Locking device

PDSH 0855

Figures
4.11.3 – 7 Crimped connections

- Relevant tests
- Crimped connections

- Mechanical / electrical contacts

PDSH 0856

Figures

4.11.3 – 7.2.4

Rivets for electrical and mechanical connections

- Rivets
- Earthing connections

- Accidental loosening

PDSH 0857
4.11.4 Material with equivalent characteristics

- Material
- Equivalent characteristics

- Conductive material 		PDSH 0858
4.11.5 Wooden parts on luminaires

- Wooden parts
- Contact with current currying parts

- Supplementary insulation 		PDSH 0859
4.12.4 Portable luminaire; different parts can be loosen by hand

- Middle pipe
- Adequate means

- Clause 4.12.4 		PDSH 0860
4.14 Suspension devices

- Additional weight
- Point B and/or C

- Design

PDSH 0861

Figure
4.14 Suspension devices for recessed luminaire

- Fixed luminaires
- Fixing devices

- Test A 		PDSH 0862
4.14.1 Clip-mounted luminaire: pulling test

- Clip-mounted luminaire
- No movement

- Unfavourable direction

DSH 0864

Figure

4.14.1

Clip-mounted luminaire

- Clip-mounted luminaire
- Unfavourable condition

- Normal use 		PDSH 0863
4.14.3 Screw adjustable by the user

- Instruction manual
- More than 360°

- User 		DSH 0865
4.15 Flammable materials

- Ignition temperature
- Life time

- Glow wire test 		DSH 0866
4.15 Heated part

- Light sources
- Ballasts

- Transformer 		DSH 0867
4.15 – 12.7.1 Application of clauses 4.15 and 12.7.1

- Ballast
- Plastic enclosure

- Metal “body” 		DSH 0868
4.15 – 12.7.1 Application of the linear regression formula

- Both materials
- Thermo-resisting bush

- Thermoplastic body 		DSH 0869
4.15 a) – 12.7.1 Luminaires in thermoplastic material (fixing points)

- Ballast
- Constructive measures

- § 4.15 a) / § 12.7.1

DSH 0870

Figure 1

Figure 2

4.16 Temperature sensing control device

- Reproducibility
- Additional fixing

- Ballast or transformer 		DSH 0871
4.16.2 – 12.6.2 Temperature sensing controls

- Temperature sensing device
- PTC or fuse

- Transformer and ballast 		DSH 0872
4.24 Annex P

- Data
- Manufacturer

- Procedure A 		DSH 0874
4.24 Use of different M.H. lamps

- ILCOS code
- Rated current

- New lamp 		DSH 0875
4.24 Protective shield

- LUMEX
- Lamp manufacturers

- Technical information 		DSH 0876
5.2

Non standardised plug for class

III luminaire

- Sub clause 4.11.6
- Marking

- Rated current 		DSH 0877
5.2.2 Insulation required on a cable (SELV operating)

- Basic insulated parts
- SELV Plug-in

- Transformer 		DSH 0878
5.2.2 External wiring for low voltage luminaire

- Sub clause 5.2.2
- Standard

- External wiring 		DSH 0879
5.2.2 - 5.3.5 Internal wiring for ordinary luminaires

- Internal cable
- Cord anchorage

- Cable length 		DSH 0880
5.2.2 - 7.2.11 Transparent flexible cords

- Transparent cable
- Earth wire

- Green / Yellow 		DSH 0881
5.2.10 Cord anchorage

- External wiring
- Cord anchorage

- Precautions 		DSH 0882
5.2.10 - 5.3.5 Cord anchorage on lampholder

- Class I – II – III
- Live parts

- Lampholder 		DSH 0883
5.2.10 - 5.3.5 Cord anchorage on adjustable luminaire

- Cord anchorage
- Adjustable

- Cable length 		DSH 0884
5.2.10 -  5.3.5 Recessed luminaire delivered with separate control gear

- Complete cord anchorage
- Sub clause 5.3.5

- Separate control gear 		DSH 0885
5.2.10.2 -  5.2.10.3 Cord anchorage with type Y or Z attachment on Printed Circuit Board

- Cord anchorage
- Soldered connection

- Type Y or Z attachment 		DSH 0886
IEC 60598-1(ed.3);am1
Clause Subject Keywords Sheet
General LED's used as a light source in luminaire - LEDs
- Harmful radiation
- Light intensity 		003/06
General IEC 62262 / EN 50102 - IEC 62262 EN 50102
- IK Code
- Degrees of protection 		002/06
General Section 12 Luminaires provided with LEDs - Control gears
- Section 12
- IEC/EN 60825-1 		005/05
0.2 - Socket-outlet mounted rechargeable luminaire
- Rechargeable lamps luminaire 		- Socket outlet
- Transformer/Plug
- Battery chargers 		007/06
0.5 Completion of Test Report Formats (TRF's) and use of Annex 1 Table of components - Components
- Certificaation
- TRFs 		017/06
3 Marking of lamp types according to IEC TS 61231 - ILCOS codes
- IEC TS
- Test Reports 		019/06
3.2.8 Lamp-type information marking - Manufacturer
- Marking plate
- Instructions 		026/06
Annex C Luminaires for M. H lamps - Rectifying effect
- Declaration
- Certification Body
- Updated Table 		126/06
Table.rect.effect.zip
IEC 60598-1(ed.4)
Clause Subject Keywords Sheet
General Luminaires system for 230V. - Luminaires system
- Extra low voltage
- IEC 60598-2-23 		002
General LEDs used as a light source in luminaires - LEDs
- Harmful radiation
- Light intensity 		003/06
General IEC 62262/ EN 50102 - IEC 62262
EN 50102
-IK code
- Degrees of protection 		002/06
General Section 12 Luminaires provided with LEDs - Control gears
- Section 12
- IEC/EN 60825-1 		DSH 005/06
0.2 - Socket-outlet mounted
  rechargeable luminaire
- Rechargeable lamps
  luminaire 		- Socket outlet
- Transformer/Plug
- Battery chargers 		DSH 007/06
0.5 Completion of Test Report Formats (TRF's) and use of Annex 1Table of components - Components
- Certification
- TRF 		017/06
3 Marking of lamp types according to IEC TS 61231 - ILCOS codes
- IEC TS
- Test Reports 		019/06
3.2.8 Lamp-type information marking - Manufacturer
- Marking plate
- Instructions 		026/06
4.7.3 Lampholder terminals - Screwless terminal
- Rewirable luminaire
- Solid/flexible conductors 		DSH 036/06
11.2.1 Pendant luminaire with a "ceiling cone" - Mounting surface
- Supply wires
- Ceiling cone 		120
Annex C Luminaires for M.H lamps - Rectifying effect
- Declaration
- Certification Body
- Updated Table 		126/06
Table.rect.effect.zip
IEC/EN 60598-1, IEC/EN 62471, IEC TR 62471-2 , Last Editions
Clause Subject Keywords Sheet
General LEDs used as a light source in luminaires - LEDs
- Harmful radiation
- Low luminance
- Hazard risk classification 		DSH 0744

General

LEDs used as a light

source in luminaires

- LEDs
- Harmful radiation

- Risk Group 1 and 2 		DSH 0812
IEC/EN 60598-1, IEC/EN 60598-2-6, IEC/EN 62031, IEC/EN 62471, IEC TR 62471-2,Last Editions
Clause Subject Keywords Sheet
Section 12 Luminaires provided with LEDs - LEDs / LED modules
- Thermal tests
- Luminaires Class I / II / III 		DSH 0745
Clause Subject Keywords Sheet
IEC 60598-1:2003(ed.6);am1
Clause Subject Keywords Sheet
9.2.0 IP 40 - IP 40
- Luminaire enclosure
- No entry
- IEC 60529
 DSH 701
General
1.2.60
2.2 		T8 to T5, T8 to T8 and similar lamp adaptors (including ditto with LED) - Retro-fit conversion units
- Semi luminaires
- Lamp adaptors 		DSH 702
8.2.3 Luminaire with PGZ12 lamp cap - PGZ12
- Metal part of the lamp cap
- Class II luminaire 		DSH 703
11 Touch lamp - Touch lamp
- Controllers
- Capacitors 		DSH 704
IEC 60598-1:2008(ed.7)
Clause Subject Keywords Sheet
1.2.81, 4.14.3 Temperature of “means of adjustment” - Adjustable luminaire
- Means of adjustment
- Temperature limits 		DSH 0747

1.2.81 - 4.14.3

Temperature of

“means of adjustment”

- Adjustable luminaire
- Means of adjustment

- Temperature limits 		DSH 0825
3.3.10 Marking – additional information

- Only for indoor use
- Additional marking

- Ordinary luminaires 		DSH 0839
IEC 60598-1:2008(ed.7) & IEC 60972:1989+A1:1991
Clause Subject Keywords Sheet
1.2.60 4.2 Adapters for G9 and GU10 (E27 lampholders) - IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1 §§ 0.3.3/0.5.1
-Semi-luminaire
- G9 – GU10 – E27 		DSH 0746
IEC 60598-2-1(ed.1);am1
Clause Subject Keywords Sheet
General Applicable standard  - Standard
- IEC 60598-2-5
- IEC 60598-2-1 		510/06
IEC 60598-2-2(ed.2);am1
Clause Subject Keywords Sheet
2.11 Built in components accessibility - 50 mm test sphere
- IEC 60598-1
- Built in components
- Accessible part
- 34D/784/CD-Proposal "S" 		088/06
2.11 IP protection of recessed parts - Paragraph 8
- IP classifications
- Item 12.3 		501/06
2.11 Consideration relevant built-in components - Built-in components
- Outside of the luminaire
- Fixed wiring 		502/06
Figures
2.11 Luminaire with R7s/RX7s lamp cap - Lampholder
- Connecting device
- Recessed luminaire 		503/06
Annex D Test recesses in a luminaire with separate parts - Manufacturer instructions
- Separating distances
- Spacers 		504/06
IEC 60598-2-3(ed.3)
Clause Subject Keywords Sheet
3.6.3 Wind force test - Complete luminaire
- Two fixing devices
- Risk of falling 		505/06
3.6.3.1 Wind force test - Weight
- Wind force test
- Top of the mast 		506/06
IEC 60598-2-4 All Editions
Clause Subject Keywords Sheet

4.12.4

Portable luminaire; different parts can be loosen by hand

- Middle pipe
- Adequate means

- Clause 4.12.4 		PDSH 0860
IEC 60598-2-4(ed.2)
Clause Subject Keywords Sheet
Definitions Portable lumjnaires, garden luminaires and lighting chains - Relevant standards
- Ordinary luminaire
- IP classification 		508/06
General Christmas decoration light - IEC 60598-2-4
- IEC 60598-2-20
- Relevant Clauses 		507/06
Figure
General Scope of application - Scope of application
- Children
- IEC/EN 60598-2-10
- IEC/EN 60598-2-4 		519/06
4.6.3 Stability test - Stability test
- Portable luminaire
- Salver / Table 		596/07
4.12 Floor Luminaire with R7s halogen lamp - Lighted Objects
- Abnormal Conditions
- Mounting Surface 		509/06
4.12.4 Portable luminaire;
different parts can be loosen by hand 		- Middle pipe
- Adequate means
- Clause 4.12.4 		051/06
IEC 60598-2-5(ed.2)
Clause Subject Keywords Sheet
General Applicable standard - Standard
- IEC 60598-2-5
- IEC 60598-2-1 		510/06
5.6.5.1 Wind force Test - Weight
- Wind Force test
- Top of the Mast 		506/06
IEC 60598-2-6(ed.2);am1
Clause Subject Keywords Sheet
General Applicablility of IEC 60598-2-6 - IEC 60598-2-6
- Transformer
- Converter 		512/06
General Transformers to be used - Basic insulation
- SELV transformers
- Supplementary insulation 		513/06
General Section 12 Luminaires provided with LEDs - Control gears
- Section 12
- IEC/EN 60825-1 		005/07
12.5.1a)4) Requirements for convertors - Transformers
- Convertors
- Requirements 		118/06
IEC 60598-2-7(ed.1);am1;am2
Clause Subject Keywords Sheet
Definitions Portable luminaires, garden luminaires and lighting chains - Relevant standards
- Ordinary luminaire
- IP classification 		508/06
7.13 IP classification for portable pedestal luminaires - IP classification
- Cable entry
- Garden luminaire 		514/06
Figure
IEC 60598-2-8(ed.1)
Clause Subject Keywords Sheet
8.10 IP 55 handlamp - IP classification
- Plug
- IP 44 		160
IEC 60598-2-8(ed.2)
Clause Subject Keywords Sheet
8.6.6.1 Mechanical strength for handlamps - Suspension hook
- Grid or guard (translucent cover)
- 250 N pull 		515/06
8.10
5.2.14 (Am1) 		IP 55 handlamp - IP classification
- Plug
- IP 44 		516/06
IEC 60598-2-8:1996(ed.2)+A1+A2
Clause Subject Keywords Sheet
Scope Portable luminaire or Lighting chain - Portable luminaire
- Lighting chain
- IP 44 transformer
-LEDs
- Applicable standards 		DSH 0748
IEC 60598-2-10(ed.1);am1;am2
Clause Subject Keywords Sheet
10.3 Portable/Child appealing luminaire - Portable
- Child-appealing
- Appliance 		161

161.figures
IEC 60598-2-10(ed.2)
Clause Subject Keywords Sheet
General Examples of luminaire - Doll
- Snowman
- Lamps with angel and bear 		517/06
Figure
General Portable luminaires for children - example - Portable luminaire
- Fixed luminaire
- Children 		518/06
Figure
10.1.1 Scope of application - Scope of application
- Children
- IEC/EN 60598-2-10
- IEC/EN 60598-2-4 		519/06
10.1.1 Luminaires with two-dimensional graphic reproductions of persons or animals (real or imaginary) on removable shades - 2D reproductions
- Removable shades
- Definitions 		597/07
IEC 60598-2-12(ed.1)
Clause Subject Keywords Sheet
12.3.1 Definition of nightlights - Nightlights
- Protective cover
- IEC 60598-2-12 		DSH 705
12.6.5 Plug in nightlight - changing the lamp - Tools
- Fixing screw
- Access while in the socket 		DSH 708
12.6.8 Child-appealing motives on mains socket outlet mounted night light - Child-appealing
- Two dimensional
- Mounted night light 		595/07.m
IEC 60598-2-13(ed.1)
Clause Subject Keywords Sheet
13.5-13.13 Marking on ground recessed luminaires - Ground recessed
- Marking
- IP rating 		DSH 706
IEC 60598-2-20(ed.2);am1;am2
Clause Subject Keywords Sheet
General Lighting chain for children - Children
- Temporary use
- IEC 60598-2-10 		520/06
Definitions Portable luminaires, garden luminaires and lighting chaims - Relevant standards
- Ordinary luminaire
- IP classification 		508/06
Scope Portable luminaire or Lighting chain - Portable luminaire
- Lighting chain
- IP 44 transformer
-LEDs
- Applicable standards 		DSH 0748
0.3.1 Portable floodlights Lighting chains IP44 - Plug
- Full-profile
- Outdoor use 		008/06
5.2.16 Connectors / screwless terminals - Clause 4.11.6
- Appliance inlets
- Connectors 		521/06
20.4 and 20.4.2 Lighting chain, (indoor or outdoor use) - Certification Bodies
- IP 44
- Plug transformer 		522/06
20.6 Connections on lighting chains - Connection
- Sleeving
- Two separate layers 		523/06
20.6.1 E14 lampholder used in lighting chains - E14 lampholder
- Lighting chain
- IEC 60238 		524/06
20.6.4 Construction - Connections
- Rope light
- Current carrying parts 		525/06
20.6.6 Small push in lamp, Small plastic lampholder, Mechanical test - Push in lamp
- Plastic lampholder
- Mechanical test 		526/06
20.6.7 Lighting chain with more than one loop - Plug
- Three wires
- Three loops 		527/06
20.6.13/20.11.3 Test conditions for lampholders - Operating condition
- Push in lamp
- 20.11.3 / 20.6.13 		528/06
20.6.14 Mechanical tests of sealed lighting chains - Sealed lighting chain
- Mechanical tests
- Temperature 		529/06
20.10.1 Cross sectional area of the conductors - IS 03
- Indoor / Outdoor
application
- Cross-sectional areas
- Plug / Sealed chain 		530/06
20.10.1 Lighting chains - Cross sectional area
- Internal wiring
- Class III
- Indoor or outdoor 		DSH 602
20.10.2 Conductors and contacts of lampholders - Cord anchorage
- Mechanism
- Both tests 		531/06
20.10.2 Lighting chains - Pulling test
- Conductors
- Class II / III 		532/06
20.10.3 Portable floodlights
Lighting chains IP44 		- Plug
- Full-profile
- Outdoor use 		008/06
20.12.3
Tables 12.1 - 12.2 		Bridging test - Normal operation
- Bridging test
- Tables 12.1 – 12.2 		534/06
20.12.3 Filament lamp bridging - Complete Set
- one by one
- Bridging Devices 		533/06
20.14 Filament lamp bridging - Outdoor Use
- Indoor Use
- Metal Foil 		535/06
20.15 Temperature for test of flexible pipes of sealed lightubg chains - Temperature
- Insulated tube
- Normal heating test 		536/06
IEC 60598-2-20(ed.3)
Clause Subject Keywords Sheet
20.6.2 c) Ordinary lighting chains

- IP 20
- Lighting chain
- For indoor use only

- IEC 60417, N° 5957

DSH 0774
IEC 60598-2-22(ed.3);am1
Clause Subject Keywords Sheet
General Alternative batteries - Battery
- Every Type
- Electrical characteristics 		537/06
General
Annex A 		Batteries - Batteries
- Elevated temperatures
- IEC 60285 		538/06
22.3 Emergency luminaire in two separate parts - Installer
- PVC or Rubber
- Whole assembly 		539/06
22.4 Classification of self contained emergency luminaires according to the mode of operation - Maintained emergency luminaires
- Non maintained emergency luminaires
- Mode of operation 		598/07
22.5.2
Annex B 		Marking - Rest mode
- Capital “B”
- Emergency luminaire 		540/06
22.5.13 Flux measurement Tolerance - Follow up tests
- 10 % Difference
- Type Tests 		541/06
22.6 Self-contained emergency luminaire with several filament lamps - Indicator
- Each lamp
- Filament lamps 		542/06
22.6.2 High frequency data sheets for lamps - Datasheets
- Lamps
- IEC Publication 		543/06
22.6.3 Fuses in the emergency lighting luminaires - Proper use
- Fuse Wire
- Print Conductor 		544/06
22.6.8
Annex A 		Batteries Characteristics - Manufacturer
- Ni-Mh batteries
- Life time / Temperature 		545/06
22.12.6 Additional thermal test with short circuit in battery charger - Abnormal test
- Battery charger
- Test voltage 		546/06
22.12.7 Lamps for photometric tests - Photometric Tests
- Endurance Tests
- Lamp (s) 		547/06
22.15 Enclosure of an emergency luminaire - Electric Parts
- Enclosure
- Glow-wire Test at 850° 		548/06
22.16.1 Rated lumen output for emergency safety sign using LED lamp array as light source - Lumen output
- LED lamp
- Reference lamps 		549/06
22.16.5a Measurement of the colour of self illuminated emergency lighting luminaires with exit legends/pictograms - Illuminated signs
- Measurement
- Internal light source 		550/06
22.17.2
22.17.3 		Ballast Lumen Factor (BLF) and flux output measurement after 500 ON-OFF changeover operations - Ballast Lumen Factor (BLF)
- Flux measurement
- Changeover operations 		551/06
Annex A
A.4.2 		Battery compartment temperature - LUMEX ELP
- 50°
- Continuous overcharge period 		552/06
A.4.2a)
A.5.2a) 		Temperature measurement on the battery - Thermocouple
- Battery body
- Hottest part 		553/06
IEC 60838(ed.1)
Clause Subject Keywords Sheet
--- Edition of the gauge sheet, when testing lampholder - gauge
- lampholder 		258.CTL-ETF5
IEC 60838-1 All editions
Clause Subject Keywords Sheet

General

E27 to G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0746A
General

E27 to  G9 and GU10 lampholder adapters

- IEC 60061-1 / 60061-3
- IEC 60838-1 / 60432-2
- IEC 60598-1

- G9, GU10, E27 		DSH 0813
IEC 60838-1(ed.4)
Clause Subject Keywords Sheet
General - Gauge
- Test Report
- IEC 60061 		- Gauge
- Test Report
- IEC 60061 		554/06
General "Special" lampholder - Special lampholder
- Enec mark
- Pillar terminal block 		559/06
IEC 60921 all editions
Clause Subject Keywords Sheet
General Samples selection (family products) - Samples selection
- Family products
- Ballasts 		587/06
IEC 60923 all editions
Clause Subject Keywords Sheet
General Samples selection (family products) - Samples selection
- Family products
- Ballasts 		587/06
General Ballast with additional terminals (to reduce the current) - Rated conditions
- Windings
- Safety requirements 		588/06
IEC 60927(ed.2);am1
Clause Subject Keywords Sheet
12.1-12.2 Endurance test for built-in ignitors in the rectifying test circuit - Test quantity
- Additional ignitors
- 30 days 		560/06
IEC 60929(ed.1)
Clause Subject Keywords Sheet
7.2 Preheat starting mode - Data sheets
- Preheat starting mode
- IEC 60081 / 60901 		231
IEC 60929(ed.2)
Clause Subject Keywords Sheet
7 Voltage across lamp during pre-heating time - Residual d.c. voltage
- Measurement
- Pre-heating time 		561/06
561/01 Figures
Annex A.4
Annex A.4.1 		Open circuit voltage measurements - Instructions
- Lamp manufacturer
- Preheating 		562/06
IEC 60968(ed.1.2)
Clause Subject Keywords Sheet
General Measurement of circuit power factor and supply current - True poswer factor
- Supply current
- High frequency components 		563/06
Figure
1 Scope / lamp caps - PRESCO
- Self-ballasted lamp
- Lamp caps 		564/06
IEC 60968:1988(ed.1)+A1+A2
Clause Subject Keywords Sheet
General Insulation of LED lamps - LED lamps
- Metal enclosure
- Double or reinforced insulation
- Class II requirements 		DSH 0749
8 Torque test on energy saving lamp - Energy saving lamp
- Torque test
- Bulb of the lamp 		DSH 0750
IEC/EN 60968, IEC/EN 60061, IEC/EN 62031, IEC/EN 62471, IEC TR 62471-2, Latest Editions, pr/IEC 62560 (guidance only)
Clause Subject Keywords Sheet
General Self-ballasted LED lamps - LEDs
- Self-ballasted lamps
- Standards
- Data Sheet / Lamp cap 		DSH 0743
IEC 60969(ed.1.0)
Clause Subject Keywords Sheet
8.4 Lamp current limit for HF
Lamps with no data for
Relevant HF reference
Ballast in data sheets
IEC 60081 / 60901 		- Lamp current
- Lamp data sheet
- Reference ballast
- Calibration current 		565/06
IEC 61047(ed.1);am1
Clause Subject Keywords Sheet
11-A.5
15-A.5 		Application of EN 61547 - IEC 60929 / 61047
- EN 61547
- Requirements 		237
IEC 61047(ed.2)
Clause Subject Keywords Sheet
General Samples selection, (family products) - Step-down convertors
- Samples selection
- IEC 1046 / 1047 		DSH 577/06
7 - 8 - 9 Cables for convertors - 20 cm
- Length specified
- Manufacturer 		DSH 566/06
IEC 61048(ed.1);am1;am2
Clause Subject Keywords Sheet
4 Sampling plan - Capacitance
- Self-healing capacitor
- 50 capacitors 		DSH 567/06
17 Use of the previous tested sample - Test time
- Destruction test
- Proposal 		DSH 568/06
IEC 61049(ed.1)
Clause Subject Keywords Sheet
3 Sampling plan - Capacitance
- Self-healing capacitor
- 50 capacitors 		DSH 567/06
8 Measurement of tangent of loss angle on capacitors - Discharge resistor
- Capacitor
- Tangent of loss angle 		DSH 569/06
IEC 61184(ed.1)
Clause Subject Keywords Sheet
--- Edition of the gauge sheet, when testing lampholder - gauge
- lampholder 		258.CTL-ETF5
IEC 61184(ed.2)
Clause Subject Keywords Sheet
Figures 17 & 19 Protection against ingress of water - Drops of liquid
- Holes of equipment
- Ingress of water 		398.CTL-ETF5
General Gauges - Gauge
- Test Report
- IEC 60061 		554/06
IEC 61347 Series
Clause Subject Keywords Sheet
7.1 Marking according to the safety requirements  - Safety requirements
- Performance criteria
- Performance marking 		571/06
IEC 61347 Series except Parts 2-2, 2-8 & 2-9
Clause Subject Keywords Sheet
General Samples selection (family products) - Samples selection
- Electronic ballast
- Ignitors 		570/06
IEC 61347-1(ed.1);am1
Clause Subject Keywords Sheet
General Applicable Standards - Components
- Temperatures
- Heating Test
- Enclosure 		572/06
14.1 Short circuit across creepage distances and clearances - COMEX
- PCB
- Creepage distance and clearance 		573/06
Annex A Test to establish whether a conductive part is a live part which may cause an electric shock - Earth
- Accessible part
- A2 test 		575/06
Annex B Annex B - Discharge lamps
- Thermal protector
- IEC 60730-2-9 		576/06
Annex 1 Ballast with double or reinforced insulation - Safety requirements
- Two layers
- Distances 		574/06
IEC 61347-2-2(ed.1)
Clause Subject Keywords Sheet
General Samples selection, (family products) - Step-down convertors
- Samples selection
- IEC 61347-2-2 / 61047 		577/06
General Section 12 Luminaires provided with LEDs - Control gears
- Section 12
- IEC/EN608265-1 		005/07
Appendix B Heating Test for convertors - tc value
- Independent convertors
- Marking 		580/06
14 Temperature on the capacitors    - Heating Test
- Capacitors
- T marking 		579/06
IEC 61347-2-7(ed.1)
Clause Subject Keywords Sheet
15.3 Lamp starting test following 3x200 lamp switching - Within 1 second
- Applied tolerance
- Correct pre-heating 		583/06
19 Lamp operating current waveform - RMS value
- Thermal result
- All the periods 		584/06
Section 6 §33 Measurement of the ratio of the luminaire flux - Measurement
- Design voltage
- COMEX / LUMEX 		581/06
Section 6 §38 Battery recharging test - Battery
- Recharging test
- Conditioning cabinet 		582/06
20 Ballast Lumen Factor (BLF) and flux output measurement after 500 ON-OFF changeover operations - Ballast Lumen Factor (BLF)
- Flux measurement
- Changeover operations 		551/06
IEC 61347-2-8(ed.1)
Clause Subject Keywords Sheet
General Tolerance on delta T value - Tolerance
- Delta T value
- Temperatures 		585/06
6 Serial compensation for ballast - Tolerances
- Capacitor
- Ballast 		586/06
IEC 61347-2-9(ed.1);am1
Clause Subject Keywords Sheet
General Tolerance on delta T value - Tolerance
- Delta T value
- Temperatures 		585/06
General Samples selection (family products) - Samples selection
- Family products
- Ballasts 		587/06
General Ballast with additional terminals (to reduce the current) - Rated conditions
- Windings
- Safety requirements 		588/06
General Applicable Standards - Components
- Temperatures
- Heating Test
- Enclosure 		572/06
6 Serial compensation for ballast - Tolerances
- Capacitor
- Ballast 		586/06
Annex B Annex B - Discharge lamps
- Thermal protector
- IEC 60730-2-9 		576/06
Annex 1 Ballast with double or reinforced insulation - Safety requirements
- Two layers
- Distances 		574/06
IEC 61347-2-11(ed.1)
Clause Subject Keywords Sheet
General Section 12 Luminaires provided with LEDs - Control gears
- Section 12
- IEC/EN 60825-1 		005/07
IEC 61347-2-13(ed.1)
Clause Subject Keywords Sheet
General Section 12 Luminaires provided with LEDs - Control gears
- Section 12
- IEC/EN 60825-1 		005/07
Scope Portable luminaire or Lighting chain - Portable luminaire
- Lighting chain
- IP 44 transformer
-LEDs
- Applicable standards 		DSH 0748
IEC 62031:2008
Clause Subject Keywords Sheet
General Insulation requirements - Live parts
- Accessible metal parts
- Insulation
- High voltage test
- RH - 95% 		DSH 0751
Scope Portable luminaire or Lighting chain - Portable luminaire
- Lighting chain
- IP 44 transformer
-LEDs
- Applicable standards 		DSH 0748
IEC 62471:2006
Clause Subject Keywords Sheet
Scope Portable luminaire or Lighting chain - Portable luminaire
- Lighting chain
- IP 44 transformer
- LEDs
- Applicable standards 		DSH 0748
IEC 62471-2:2009
Clause Subject Keywords Sheet
Scope Portable luminaire or Lighting chain - Portable luminaire
- Lighting chain
- IP 44 transformer
- LEDs
- Applicable standards 		DSH 0748
2011-12-05