iecee logo

Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE)
 



NEW ACCEPTED IEC STANDARDS IN THE IECEE CB-SCHEME

Dividor


Just Published logo

_No. 1 - 2007-01-12
 


GUIDELINES

The Member NCB(s) of the IECEE are the sole Organizations in conjunction with their associated CBTL(s), in the field of the IECEE operations, entitled to apply to operate the relevant IEC standard(s), edition(s) and amendment(s).

When National Differences exist against the relevant IEC standards, it is the responsibility of the Member NCB(s) to declare such status for each standard/edition(s)/amendment(s) and provide details of such National Differences by sending an email with the details to the IECEE Secretariat.

The Member Body is required to endorse the National Differences, Special National Conditions, Group Differences, by being copied in the email sent to the IECEE Secretariat. Regulatory Requirements shall be declared under the responsibility of the NCB.

IECEE Member NCB(s) are kindly requested to provide this information in electronic format (MSWord).

The Member NCB(s) “Scope Extension Request” can be declared/requested either by using the:

*Note: The Fast Track Extension request requires an application that shall be addressed to the IECEE Secretariat according to draft OD-CB2007 as applicable.

**Note: The Scope Extension request requires an application that shall be addressed to the IECEE Secretariat according to OD-CB2007 Part 5 or 7 as applicable.

For Member NCB(s) located in the same country where Regulatory Requirements, National Differences, Special National Conditions and Group Differences apply, it is the responsibility of the Member NCB(s) to coordinate, nationally, in order to provide the required information to the IECEE Secretariat once.

Of course the NCB must coordinate with their Member Body or the IEC National Committee to make sure that they are provided with the appropriate information.


Dividor

IECEE CB-Scheme Standards Product Categories
Dividor
 

BATT - Batteries

IEC60095-1(ed.7) (2006)
Lead-acid starter batteries - Part 1: General requirements and methods of test

separator

CABL - Cables and Cords

No new IEC standard(s)

dividor11

CAP - Capacitors as components

No new IEC standard(s)

CONT - Switches for appliances and automatic controls for electrical household appliances

No new IEC standard(s)

EMC - Electromagnetic Compatability

CISPR 15(ed.7);am1 (2006)
Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

CISPR16-1-1(ed.2);am1 (2006)

Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

CISPR20(ed.6) (2006)

Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement

CISPR22(ed.3);am1 (1997)
Amendment 1 - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

CISPR22(ed.3);am2 (2001)
Amendment 2 - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement


IEC61000-4-3(ed.1);am2 ( 2002)

Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

IEC61000-4-4(ed.1);am1;am2 (2002)

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

IEC61000-4-6(ed.1);am1 (2002)
Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

IEC61000-4-11(ed.1);am1 (2002)
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

HOUS - Household and similar equipment

IEC60335-2-35(ed.4);am1 (2006)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters

INST - Installation accessories and connection devices

IEC60974-1(ed.2);am1 (1996)
Arc welding equipment - Part 1: Welding power sources

IEC60974-1(ed.2);am2 (2002)
Arc welding equipment - Part 1: Welding power sources

IEC60974-1(ed.3) (2005)

Arc welding equipment - Part 1: Welding power sources

LITE - Lighting

IEC60155(ed.4);am2 (2006)
Amendment 2 - Glow-starters for fluorescent lamps


IEC61347-2-3(ed.1);am2 (2006)
Amendment 2 - Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps

MEAS - Measurement, Control and Laboratory equipment

No new IEC standard(s)

MED - Electrical equipment for medical use

IEC60601-1-6(ed.2) (2006)
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability


IEC60601-1-8(ed.2) (2006)
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

IEC61223-2-6(ed.2) (2006)
Evaluation and routine testing in medical imaging departments ­ Part 2­6: Constancy tests ­ Imaging performance of computed tomography X-ray equipment

MISC - Miscellaneous

No new IEC standard(s)

OFF - IT and office equipment

IEC 60825-2(ed.3);am1 (2006)
Amendment 1 - Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)

POW - Low voltage, high power switching equipment

No new IEC standard(s)

PROT - Installation protective equipment

IEC60269-2(ed.3) (2006)
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to I


IEC60269-3(ed.3) (2006)
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F


IEC61540(ed.1);am1 (1998)
Amendment 1 - Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

PV - Photovoltaics

No new IEC standard(s)

SAFE - Saftey transformers and similar equipment

No new IEC standard(s)

separator

TOOL - Portable tools

IEC60745-2-6(ed.2);am1 (2006)
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers

TOYS - Electric Toys

No new IEC standard(s)

TRON - Electronics, entertainment

No new IEC standard(s)

NOTE:

If you have a received a request from the industry to certify for any additional IEC standard(s) that is not listed here, that you would like to add to the IECEE CB-Scheme, please send the IECEE Secretariat an email.


separator

WITHDRAWN/REPLACED PUBLICATIONS

Publication withdrawn TC Replaced by
There are no withdrawn/replaced publications    

Copyright © IECEE 2007. All Rights Reserved.

If you have any questions and/or comments, please contact The IECEE Secretariat.